救命，我弄乱了我的USB！ ！ ！ [英] Help, I have messed up my USB! ! !
问题描述
信息：
运行debian 8.10
LINUX
它在删除之前它正在工作（但只是只读）
它是写保护的（我想读写）
前一段时间，我在我的电脑上安装了Linux cinnamon-64 USB。我试图将它用于文件（你知道，将文件移到USB上，然后移到不同的PC或其他任何东西），我试着重新格式化它。我用GParted删除了仍然在那里的Cinnamon-64（无法手动删除，因为它是只读的）我删除了其他代码，我认为这是安装到计算机的代码，因为现在，当我尝试查看文件，它出现了这个错误：
在/ media / mixtli / LMDE 2 Cinnamon 64位上安装/ dev / sdc1时出错：命令-line`mount -tiso9660-ouhelper = udisks2，nodev，nosuid，uid = 1000，gid = 1000，iocharset = utf8，mode = 0400，dmode = 0500/ dev / sdc1/ media / mixtli / LMDE 2 Cinnamon 64位'以非零退出状态退出32：挂载：/ dev / sdc1被写保护，挂载只读
挂载：错误的fs类型，错误的选项，/ dev / sdc1错误的超级块，
缺少代码页或帮助程序，或其他错误
在某些情况下，可以找到有用的信息系统日志 - 尝试
dmesg |尾巴左右。
固定：
我需要做sudo hdparm -r0'/ media / mixtli / LMDE 2 Cinnamon 64-bit'将只读设置为0（假）然后我做了教程。谢谢你的帮助!!
我的尝试：
我试过dmesg |尾巴，它提出了这个：
[2720.118342] ISOFS：无法识别CD-ROM格式。
[2721.535707] [UFW BLOCK] IN = wlan0 OUT = MAC = 01：00：5e：00：00：01：40：0d：10：f6：6b：98：08：00 SRC = 192.168.0.1 DST = 224.0.0.1 LEN = 32 TOS = 0x00 PREC = 0xC0 TTL = 1 ID = 44476 PROTO = 2
[2846.566526] [UFW BLOCK] IN = wlan0 OUT = MAC = 01：00：5e：00：00：01：40： 0d：10：f6：6b：98：08：00 SRC = 192.168.0.1 DST = 224.0.0.1 LEN = 32 TOS = 0x00 PREC = 0xC0 TTL = 1 ID = 44485 PROTO = 2
[ 2971.495894] [UFW BLOCK] IN = wlan0 OUT = MAC = 01：00：5e：00：00：01：40：0d：10：f6：6b：98：08：00 SRC = 192.168.0.1 DST = 224.0.0.1 LEN = 32 TOS = 0x00 PREC = 0xC0 TTL = 1 ID = 44493 PROTO = 2
[3003.853783] [UFW BLOCK] IN = wlan0 OUT = MAC = 01：00：5e：00：00： 01：40：0d：10：f6：6b：98：08：00 SRC = 192.168.0.1 DST = 224.0.0.1 LEN = 36 TOS = 0x00 PREC = 0xC0 TTL = 1 ID = 44498 PROTO = 2
[3096.526940] [UFW BLOCK] IN = wlan0 OUT = MAC = 01：00：5e：00：00：01：40：0d：10：f6：6b：98：08：00 SRC = 192.168.0.1 DST = 224.0.0.1 LEN = 32 TOS = 0x00 PREC = 0xC0 TTL = 1 ID = 44502 PROTO = 2
[3221.557313] [UFW BLOCK] IN = wlan0 OUT = MAC = 01：00：5e：00：00：01：40：0d：10：f6：6b：98：08：00 SRC = 192.168.0.1 DST = 224.0.0.1 LEN = 32 TOS = 0x00 PREC = 0xC0 TTL = 1 ID = 44510 PROTO = 2
[3265.283967] [UFW BLOCK] IN = wlan0 OUT = MAC = 01 ：00：5e：00：00：01：40：0d：10：f6：6b：98：08：00 SRC = 192.168.0.1 DST = 224.0.0.1 LEN = 36 TOS = 0x00 PREC = 0xC0 TTL = 1 ID = 44515 PROTO = 2
[3346.486022] [UFW BLOCK] IN = wlan0 OUT = MAC = 01：00：5e：00：00：01：40：0d：10：f6：6b：98： 08:00 SRC = 192.168.0.1 DST = 224.0.0.1 LEN = 32 TOS = 0x00 PREC = 0xC0 TTL = 1 ID = 44519 PROTO = 2
[3355.058846] ISOFS：无法识别CD-ROM格式。
我在第一个答案中也试过这个教程。当我做了挂载/ dev / sdc1 / media / usb-drive /它想出了这个：
mount：/ dev / sdc1是写保护的，挂载读取-only
mount：错误的fs类型，错误选项，/ dev / sdc1上的超级块坏，
缺少代码页或帮助程序，或其他错误
在某些情况下，在syslog中找到有用的信息 - 试试
dmesg |尾巴左右。
固定
很可能是因为ISO9660是CDROM的文件系统格式，不适合USB驱动器。
你应该看看如何在Linux中安装USB驱动器 [ ^ ]。
Info:
running debian 8.10
LINUX
And it was working (but only read-only) before I deleted it
It is write protected (I would like to read and write)
A while ago, I installed Linux cinnamon-64 on my PC using this USB. I tried to use it for files (you know, move files onto USB and out onto different PC or whatever) and I tried to reformat it. I used GParted to delete the Cinnamon-64 that was still on there (couldn't delete it manually as it was read-only) and I deleted the other code as well which I think was the code for mounting to computers because now, when i try to view the files, it comes up with this error:
Error mounting /dev/sdc1 at /media/mixtli/LMDE 2 Cinnamon 64-bit: Command-line `mount -t "iso9660" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500" "/dev/sdc1" "/media/mixtli/LMDE 2 Cinnamon 64-bit"' exited with non-zero exit status 32: mount: /dev/sdc1 is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
FIXED:
I needed to do sudo hdparm -r0 '/media/mixtli/LMDE 2 Cinnamon 64-bit' to set read-only to 0 (false) then i did the tutorial. Thx for ur help!!
What I have tried:
I have tried dmesg | tail and it comes up with this:
[ 2720.118342] ISOFS: Unable to identify CD-ROM format.
[ 2721.535707] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:40:0d:10:f6:6b:98:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=44476 PROTO=2
[ 2846.566526] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:40:0d:10:f6:6b:98:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=44485 PROTO=2
[ 2971.495894] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:40:0d:10:f6:6b:98:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=44493 PROTO=2
[ 3003.853783] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:40:0d:10:f6:6b:98:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=44498 PROTO=2
[ 3096.526940] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:40:0d:10:f6:6b:98:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=44502 PROTO=2
[ 3221.557313] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:40:0d:10:f6:6b:98:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=44510 PROTO=2
[ 3265.283967] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:40:0d:10:f6:6b:98:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=44515 PROTO=2
[ 3346.486022] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:40:0d:10:f6:6b:98:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=44519 PROTO=2
[ 3355.058846] ISOFS: Unable to identify CD-ROM format.
I have also tried the tutorial in the first answer. when I did mount /dev/sdc1 /media/usb-drive/ it came up with this:
mount: /dev/sdc1 is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
FIXED
Most probably because ISO9660 is a file-system format for CDROMs, which does not fit for USB drives.
You should maybe look at How to mount an USB drive in Linux[^].
这篇关于救命，我弄乱了我的USB！ ！ ！的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
