NDIS未分类驱动程序：HCK认证|| WLK 1.6 Vs HCK 2.1 [英] NDIS-Unclassified Driver : HCK Certification || WLK 1.6 Vs HCK 2.1

问题描述

我正在尝试提供早期认证的"NDIS"的维护版本。基于设备驱动程序。

此设备的最后一个驱动程序是Windows认证的，使用WLK 1.6 for Windows 7作为"Initial_NDIS_UnClassified"。驱动程序类型（通过WLK 1.6和Unclassified签名程序）



对于这个新的维护版本，代码有一个小的变化，因此驱动程序二进制文件（。 sys文件）将被更新，需要Windows重新认证。



（1）我仍然可以使用"WLK  1.6"仅重新运行标准要求的测试作为"NDIS_UnClassified"设备并向Microsoft提交认证（如前所述）。



注意：

如果我使用最新的WHCK 2.1，控制器（收集器）自动检测该设备（连接到测试客户端）作为"HSPA网络适配器"。以及包括"NDISTest 6.0"在内的所有徽标测试（NDISTest）。和"NDISTest 6.5"和"NDISTest 6.5"。
正在加载。

两个NDISTest都包含"NDISTest - [Machine 2]"。测试用例（需要支持/客户端机器设置），这与我们的情况无关。

（2）如果我们只需要使用WHCK 2.1，有没有办法，我们可以提交认证，无需执行这些徽标测试用例（NDISTest）？



由于这只是维护版本，我们只想将此驱动程序保留为NDIS - 未分类（通过标准的未分类测试并申请Microsoft认证，无需运行NDIS徽标测试）



（3）另外，WLK 1.6和HCK 2.0安装在同一台服务器上共存？

谢谢

Abhay

解决方案

嗨Abhayms，

1）WLK 1.6对于认证Windows Server 2008R2上的驱动程序仍然有效Win7操作系统。 HCK 2.1支持从Windows Server 2008R2 / Win 7到最新操作系统。因此，Win 7在两个版本的套件之间是相互的。您可以使用Win 7中的任一套件。

2）如果您打算使用HCK 2.1，您必须完成所有测试用例，或者如果您要提交部分提交，那么您需要对于不适用于您的设备的剩余测试用例的手动勘误表，为此您必须联系SYSDEV。

3）您不能 在同一台服务器上安装两个套件你必须只在服务器上使用一个套件。

谢谢，

Mudit

I am trying to deliver a maintenance release of an earlier certified "NDIS" based device driver.
The last driver for this device was Windows certified using WLK 1.6 for Windows 7 as an "Initial_NDIS_UnClassified" driver type (through the WLK 1.6 and the Unclassified signature program)

For this new maintenance release, there is a minor change in the code, hence the driver binary(.sys file) will be updated and needs to be Windows re-certified.

(1) Can i still use the "WLK  1.6" to re-run only the standard required tests as an "NDIS_UnClassified" device and submit for Certification to Microsoft(as done earlier).

Note:
If i use the the latest WHCK 2.1, the controller(gatherer) automatically detects this device(connected to test client) as an "HSPA NETWORK ADAPTER" and the all the logo tests(NDISTest) including the "NDISTest 6.0" and "NDISTest 6.5" are being loaded.
Both the NDISTest's contain the "NDISTest - [Machine 2]" test cases(that require support/client machine setup), which are not relevant to our case.
(2) If at all we have to use only the WHCK 2.1, is there a way, we could submit for certification, without the need of executing these logo test cases (NDISTest)?

As this is only maintenance release, we would just want to keep this driver as NDIS-Unclassified as before( pass the standard Unclassified tests and apply for Microsoft certification without the need of running the NDIS Logo test)

(3) Also, can WLK 1.6 and HCK 2.0 installations co-exist on the same Server?

Thanks

Abhay

解决方案

Hi Abhayms,

1) WLK 1.6 is still valid for certifying drivers upto Windows server 2008R2\ Win7 OS. HCK 2.1 supports from Windows Server 2008R2/Win 7 till latest OSes. So, Win 7 is mutual between both versions of kit. You can use either of kit for Win 7.

2) If you are going to use HCK 2.1, you have to complete all test cases or if you are submitting partially submission, then you need Manual Errata for remaining test cases which are not applicable for your device , for this you have to contact SYSDEV.

3) you can't  install both kits on same server. you have to use one kit only on a server.

Thanks,

Mudit

这篇关于NDIS未分类驱动程序：HCK认证|| WLK 1.6 Vs HCK 2.1的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！