虚拟CEPC图像下载错误 [英] Virtual CEPC Image Download Error
问题描述
您好
我已完成本书的所有阶段
" Getting_Started_With_Virtual_CEPC.pdf" ,但在附加
到设备时,我在visual studio中出现以下错误输出
窗口
:
=============================================== ====
(Corecon)下载启动...
(Corecon)错误:无法下载图像。请检查连接
设置。
PB调试器内核调试器已断开连接
成功。
(Corecon)离开目标设备是成功的。确保您还要分离或关闭所有其他工具的$
。与
设备连接的所有其他工具。
================================================== =
并且在Windows Virtual PC Window中我有这个
消息:
=========== ========================================
$
命中空间进入配置菜单5 ...
发送DHCP发现消息(尝试1)
从DHCP服务器192.168.2.1获取响应,地址为
192.168.2.128
发送地址192.168.2.128的ARP请求
无ARP响应,假设所有权为192.168.2.128
发送BOOTME消息(设备名称PC-0003FF70D4AE,尝试1)
接受从192.168.2.104端口下载64649
$
错误:BootTransportPb:发生TFTP超时!
错误:BootDownloadBin!ImageType:BootTransportRead失败!
***设置为低功耗状态***
*** HALT
***
========================== =========================
此外,有必要说我有一台电脑Gigabyte
GA-P55-USB3 rev 1与Windows 7旗舰版和我的网络适配器是
Realtek PCIe GBE家庭控制器。
谢谢
可以通过关闭网卡的UDP校验和来解决这个问题。 />
此链接更多细节
http://blogs.msdn.com/b/obloch/archive/2010/08/12/windows-embedded-compact-7-and-virtual-pc -bsp.aspx
Hi
I have done all phases of the book
"Getting_Started_With_Virtual_CEPC.pdf" , but at the time of Attach
to the device I get the following error in visual studio Output
window
:
===================================================
(Corecon) Download initiated...
(Corecon) Error: Failed to download image. Please check connection
settings.
PB Debugger The Kernel Debugger has been disconnected
successfully.
(Corecon) Detachment from the target device was successful. Make sure
that you also detach or close
all other tools that are connected to the
device.
===================================================
and in Windows Virtual PC Window i have this
messages:
===================================================
Hit space to enter configuration menu 5...
Send DHCP Discover Message (attemp 1)
Get Response from DHCP server 192.168.2.1 with address
192.168.2.128
Send ARP request for address 192.168.2.128
No ARP response, assuming ownership of 192.168.2.128
Send BOOTME message (device name PC-0003FF70D4AE, attempt 1)
Accept download from 192.168.2.104 port 64649
ERROR: BootTransportPb: TFTP timeout occured!
ERROR: BootDownloadBin!ImageType: BootTransportRead Failed!
*** Setting to low power state ***
*** HALT
***
===================================================
In addition, it is necessary to say that i have a PC with Gigabyte
GA-P55-USB3 rev 1 with Windows 7 Ultimate and my Network Adaptor is
Realtek PCIe GBE Family Controler.
Thanks
It can be resolved by turning off UDP Checksum of your network card.
More detail in this link
http://blogs.msdn.com/b/obloch/archive/2010/08/12/windows-embedded-compact-7-and-virtual-pc-bsp.aspx
这篇关于虚拟CEPC图像下载错误的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!