Windows 8 - 手动Wifi创建不起作用 [英] Windows 8 - Manual Wifi creation dont work

查看:61
本文介绍了Windows 8 - 手动Wifi创建不起作用的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

在Acer W500上运行Windows 8预览,在连接到我公司的外部wifi网络时面临问题

Running windows 8 preview on Acer W500, facing issue while connecting to my company external wifi network

详情:ckick在其他网络上

Details: ckick on other network

输入SSID:< test> 

enter SSID : <test> 

点击用户名和密码

输入用户名

输入密码

点击确定

问题:"屏幕返回,要求点击用户名和密码或证书"

Issue: "screen comes back asking to click for username and password or certificate"

我能够成功连接到我的IPAD这个SSID,其他wifi网络就好了,只有手动网络有问题(甚至没有来到要求WPA2企业的屏幕)

I am able to connedct to this SSID with my IPAD successfully, other wifi networks just fine, only manual network has issue (doesn't even come to a screen asking for WPA2 enterprise)

推荐答案

我的第一个建议是确保为无线设备安装了兼容的驱动程序。在安装过程中由Windows安装的驱动程序并不总是有效。我不知道你在主板上有什么样的芯片组,但是我从
的经验中知道NVidia nforce芯片组与微软的驱动程序不兼容。我总是要从Nvidia下载它们。在安装正确的芯片组驱动程序之前,可能无法完全识别某些集成硬件。如果您访问支持
的无线设备网站,​​我相信您会注意到没有可用的Windows开发人员预览驱动程序。不是问题。只需使用Windows 7驱动程序即可。如果你有一个PC附带的驱动程序光盘,并且它有所有集成
硬件的Windows 7驱动程序,你应该安装它们。我遇到了几个实例,我必须打开驱动程序安装程序包的属性并告诉它在Windows 7的兼容模式下运行,并以管理员身份运行,但之后它们运行正常。希望这个
有所帮助。对不起,如果没有。 
My first suggestion would be to make sure that a compatible driver was installed for the wireless device. The drivers installed by windows during setup don't always work. I don't know what kind of chipset you have in the motherboard, but I know from experience that NVidia nforce chipsets don't work quite right with the Microsoft drivers. I always have to download them from Nvidia. Until proper chipset drivers are installed, some integrated hardware may not be recognized fully. If you go to the support website for your wireless device, I'm sure you'll notice there are no windows developer preview drivers available. Not a problem. Just use windows 7 drivers. If you have a driver disc that came with the PC, and it has windows 7 drivers for all integrated hardware, you should install them. I have run into a couple of instances where I had to open properties for a driver installer package and tell it to run in compatibility mode for windows 7, and Run as Administrator, but they worked fine after that. Hope this helps some. Sorry if it doesn't. 


这篇关于Windows 8 - 手动Wifi创建不起作用的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆