在USB上安装WES7 [英] Installing WES7 on USB

问题描述

大家好我想在Usb上安装WES 7图像，但由于某些原因我无法做到这一点。所以请指导我完成它。以下是我遵循的步骤：

Hi Everybody I am trying to install WES 7 image on Usb but because of some reason I am not able to do that. So please guide me through it. Below are the steps that I followed:

 

• 确保我需要安装的USB插入当前正在运行Image Builder Wizard的设备。
• 从Windows Embedded Standard 7 Toolkit启动Image Builder向导 。在
  请选择要包含在图片中的要素包页面中，执行以下操作：
  

• Made sure that the USB I need to install to is plugged into the device that is currently running the Image Builder Wizard.
• Started Image Builder Wizard from the Windows Embedded Standard 7 Toolkit  . On the Please select Feature Packages to include in your image page, did the following:

1. 在嵌入式启用功能<下/ strong>，选择可启动Windows USB堆栈。
2. 添加了一些其他软件包。
3. 单击"解决"按钮并解决所有依赖项问题。
4. 继续解决依赖关系直到完成。

确保USB已插入设备，然后选择
下一步继续。

这一步应该是这样的：

在目标驱动器选择屏幕上，选择USB目标。分区并格式化USB，然后继续安装过程。

On the destination drive selection screen, selected the USB target. Partition and format the USB, then continue the installation process.

但是我看不到Usb Drive作为选择选项，我尝试了多次刷新，但它没有检测到。

But I cannot see Usb Drive as selection option, I tried it with refreshing many times but it’s not detecting.

5。此USB将部署到另一台目标设备，因此我需要在图片上运行Sysprep 。有点不清楚如何在特定图像上运行Sysprep。

5. This  USB will be deployed to another destination device, so I need to  Run Sysprep on the Image. Bit not clear how to run Sysprep on specific image.

请尝试逐步提供一些步骤。谢谢...... ..

Please try to give some step by step process. Thanks…..

 

推荐答案

嗨Janud82，

Hi Janud82,

请按照以下步骤在USB上创建WES7图像：

Please follow the below steps to create a WES7 image on a USB:

步骤1：按照上述步骤（1-3）进行操作在以下位置创建可启动实用程序UFD

Step 1: Follow the steps(1-3) mentioned at the below location to create a bootable utility UFD

http://msdn.microsoft.com/en-us/library/ff795043(v = winembedded.1001）.aspx

第2步：启动ICE工具箱中的（图像配置编辑器）

Step 2: Launch ICE (Image Configuration Editor) from the toolkit

步骤3：文件 - >选择分配共享

Step 3: File -> Select Distribution Share

步骤4：右键单击并创建新的答案文件

Step 4: Right Click and create a new answer file

步骤5：添加要包含在您的所有功能中将图像写入答案文件

Step 5: Add all the features that you want to include in your image into the answer file

步骤6：转到验证 - >仅验证（即验证配置/映像）并解决所有错误。请务必选择"可启动Windows USB堆栈"。

Step 6: Goto Validate -> Validate Only (i.e. Validating the configuration/image) and resolve all the errors. Be sure to select "Bootable Windows USB Stack".

步骤7：转到工具 - >创造媒体 - >从答案文件创建IBW图像

Step 7: Goto Tools -> Creat Media -> Create IBW Image from Answer File

步骤8：在"选择图像的目标文件夹"中指定USB的驱动器（例如E： 或者F :)，然后单击"确定"

Step 8: In the "Select the target folder for the image" specify the drive of the USB (eg. E:  or  F:), and then click 'OK'

使用上述您应该能够在USB上创建WES7图像的步骤。如果您在使用这些步骤时遇到任何问题，请与我们联系。

Using the above steps you should be able to create the WES7 image on a USB. Let me know if you face any issues with these steps.

这篇关于在USB上安装WES7的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！