Body Frame基本样本卡住了我的设备 [英] Body Frame basic sample stuck my device
问题描述
亲爱的，
我对SDK示例"Control Basic WPF"有一个奇怪的问题。 。
I have a wierd issue with the SDK sample "Control Basic WPF" .
当我第一次运行它时，一切正常。
When I run it the first time, all is working fine.
然后我关闭应用程序并再次启动它，我的设备不再工作，没有更多的追踪点即将到来（黑色）屏幕。
Then I close the application and start it a second time, my device is not working any more and no more tracing point are coming (black) screen.
然后我关闭设备的电源并重新运行样品。
Then I switch off the power from the device and run teh sample again.
然后重复相同的过程，并且所有第二次尝试我没有其他方式除了关闭电源恢复。
Then repeat teh same process, and all second time try I have no Other way than switching off the power to recover.
我注意到这种行为后，所有样本在哪里追踪身体点是涉及不再工作。所有其他样本与跟踪工作无关确定
I ahve notice that after this behaviour, all sample where tracking body point are involves are not working anymore. All Other sample not relative to tracking work ok
知道什么是goign？
Any idea what is goign on ?
样本是否未正确关闭某些导致问题
Does the sample is not closing properly some stuff which cause the issue
感谢您的帮助
问候
哔叽
您的知识会被其他人的知识所增强。
Your knowledge is enhanced by that of others.
推荐答案
在已知的工作系统上，问题您报告的内容不具有可再现性。非托管c ++ / D2D示例是否有效？问题可能出在系统的电源状态，请参阅D2D示例在进入此状态时的故障排除线程：
On a known working system, the issue you are reporting is not reproducible. Do the unmanaged c++/D2D samples work? the issue might be with power state of the system, see the troubleshooting thread the D2D samples work when you get into this state:
您可以强制系统"重启" ;运行时，但重新启动KinectMonitor服务，但这应该是必需的。
You could force the system to "restart" the runtime, but restarting the KinectMonitor service, but this should be required.
net stop "Kinect Monitor"
net start "Kinect Monitor"
这篇关于Body Frame基本样本卡住了我的设备的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
