Kinect SDK裸露最低要求(fit-PC) [英] Kinect SDK Bare Minimum Requirements (fit-PC)

查看:61
本文介绍了Kinect SDK裸露最低要求(fit-PC)的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

大家好,我很想知道Kinect SDK的最低要求是什么,以确保Kinect SDK以完全(或接近完整)的性能容量运行(比方说,30 fps?正如我所读到的那样)其他人有fps下降与较慢的处理器int
他过去)。 kinectforwindows.org页面列出了2.66 Ghz,虽然我假设这个规范不是最低规格,而是推荐的,因为我正在运行kinect,目前在双核2.0 ghz处理器上没有问题。理想情况下,
我想在低功耗PC上运行kinect,例如
fit- PC
因为我打算将它用于部分移动应用程序。如果任何人有使用fit-pc和kinect或类似应用程序的经验,我很乐意听取您的意见。我想听听每个人使用不同硬件的想法和经验!
我假设有些人正在运行上网本!



(仅供参考)是的,我发现有很多关于最低要求,其中一个发布了

页面返回
这里,但我的问题不是什么是"推荐"的要求,而是最低要求。或者更重要的是,我的问题是,一台fit-PC能否充分运行使用kinect编写的程序。



为了进一步说明它的使用,理想情况下,我想要有完整的功能(包括骨架跟踪),但是如果骨架跟踪是推动CPU太多的东西,我可能没有它并且只使用深度馈送(但深度
是我必须使用的) 。

Hello all, I'm curious to know as to what the bare minimum requirements anyone out there has determined for the Kinect SDK to run at full (or near full) performance capacity (say, 30 fps? as I've read of others having fps drops with slower processors int he past). The kinectforwindows.org page lists 2.66 Ghz, though I'm assuming that this specification is not a minimum specification, rather a recommended one as I am running the kinect with no problems on a dual core 2.0 ghz processor at the moment. Ideally, I'd like to run the kinect off a low power consumption PC such as the fit-PC as I'm planning on using it for a partially mobile application. If anyones had experience with a fit-pc and a kinect or similar applications, I'd love to hear from you. I'd like to hear everyones thoughts and experiences using different hardware! I'm assuming some of you out there are running netbooks!

(Just for reference) Yes, I realise there are dozens of threads about the minimum requirements, one such posted a page back here, but my question is not so much what are the 'recommended' requirements, rather the bare minimum requirements. Or more so my question is, will a fit-PC adequately run programs written utilising the kinect.

To further specify the use of it, ideally, I'd like to have full functionality (including skeleton tracking), however if skeleton tracking was something that pushed the CPU too much, I could probably do without it and just use the depth feed (but the depth is a must for my use).

推荐答案

我不认为它会在2.0 ghz下正常运行,因为正在进行处理。

I dont think it will run correctly under 2.0 ghz because of the processing thats going on.

我认为深度馈送甚至不会低于1.6 - 1.7  ghz或我现在在笔记本电脑上运行的程序的一半。

I dont think depth feed would even run below 1.6 - 1.7 ghz or half the programs i run on my laptop right now.

正确运行kinect传感器软件 规格kinectforwindows.org上列出了它。

For correct running of kinect sensor software the specifications listed on kinectforwindows.org mus be followed.

 我知道它似乎将kinect推到更小的东西但是任何低于2.0ghz的东西都可能导致开始引起问题并且肯定低于1.5 ghz(我不要认为Windows 7可以un低于该值或1.5 ghz的任何事情)。

 I know it seems to push kinect onto something smaller but anything below 2.0ghz might cause start causing problems and below 1.5 ghz for sure (i dont think windows 7 can run on anything below that or on 1.5 ghz for that matter).


这篇关于Kinect SDK裸露最低要求(fit-PC)的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆