Kinect SDK Beta 2 Interop问题 [英] Kinect SDK Beta 2 Interop problem

问题描述

嗨！

我刚刚为Kinect安装了第二次SDK刷新版。我发现插入Kinect导致我的USB调谐器行为不端。 Kinect SDK的Beta 1一切正常。问题详情如下。

I've just installed the 2nd refresh of SDK for Kinect. I've found out that having Kinect plugged in causes my USB tuner to misbehave. Everything worked fine with Beta 1 of Kinect SDK. The problem details follow.

我使用华硕G73Jh笔记本电脑和Windows 7 64位操作系统。

I use ASUS G73Jh notebook with Windows 7 64 bit OS.

我有AverMedia AverTV Hybrid Volar高清电视调谐器连接到我的机器，与Kinect一起。将它们连接起来会导致以下情况：

I've got AverMedia AverTV Hybrid Volar HD TV tuner connected to my machine, alongside with the Kinect. Having them connected at the same time causes the following:

- 我无法使用Windows Media Center或任何其他应用程序观看电视。 WMC输出"低比特率"诊断信息。 Kinect运行正常。

- I can't watch TV using my Windows Media Center or any other application. WMC outputs "Low Bitrate" diagnostic message. The Kinect works fine.

- 如果我拔掉Kinect，开始在WMC上观看电视，并且 - 在电视仍在播放的情况下 - 将其重新插入，然后Kinect无法使用。骨架视图示例应用程序枚举设备，但声明它没有动力。

- If I unplug Kinect, start viewing TV on WMC, and - with TV still playing - plug it back in, then the Kinect is unusable. The skeletal viewwer sample app enumerates the device, but states that it's unpowered.

我尝试将设备连接到不同的USB端口，问题占上风。即使调谐器和Kinect是连接到机器的唯一设备，它也存在。

I've tried connecting the devices to different USB ports and the problem prevails. It's present even if tuner and Kinect are the only devices connected to the machine.

我对此事的任何建议表示感谢。我找不到任何针对Kinect SDK的错误跟踪服务，所以论坛是我决定用来提及问题的地方。

I'd be grateful for any advice on the matter. I couldn't find any bug tracking service for Kinect SDK, so the forum is the place I've decided to use for mentioning the problem.

干杯，Łukasz

推荐答案

Kinect使用61％的USB带宽作为主机控制器。您必须确保它们位于不同的主机控制器上（而不仅仅是端口）。

the Kinect uses 61% of the USB bandwidth for a host controller. You'll have to make sure they are on separate host controllers (not just ports).

这篇关于Kinect SDK Beta 2 Interop问题的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！