在最新的beta补丁中初始化稳定性问题？ [英] initialize stability problem in latest beta patch?

问题描述

 

我最近更新了MS SDK的最新测试补丁。  使用C ++ SkeletonViewer测试它。  我发现我遇到稳定性问题，我成功通过了NuiInitialize函数调用，但是我没有收到IR或RGB相机
数据。  但是，有时当我启动应用程序时它运行正常。  

I recently update to the latest beta patch for the MS SDK.  Testing it out with the C++ SkeletonViewer.  I've found that I am having a stability problem where I successfully get past the NuiInitialize function call, but I receive no IR or RGB camera data.   However, sometimes when I start the application it runs fine.  

我没有发现这种行为模式的方式： 

I have not found much in the way of patterns for this behavior: 

在32位机器上没有发生，我仅在64位Windows 7机器上看到它。

Has not occurred on a 32 bit machine, I have seen it only on a 64 bit Windows 7 machine.

该应用程序似乎在第一次将计算机从硬关机状态恢复时工作（如果Kinect也已从电源并重新插入。） 

The application seems to work the first time I bring the computer back from a hard shutdown (and if the Kinect has also been unplugged from the power source and re-plugged in.) 

在调试和发布中运行时都会发生此行为。 

This behavior has occurred both when running in debug and release. 

此行为在"以管理员身份运行"时发生或者不是。 

This behavior has occurred when "running as adminstrator" or not. 

直接从Visual Studio 2010运行，或直接从编译的exe运行时也会发生。 

It has also occurred when running directly from Visual Studio 2010, or directly from the compiled exe. 

有时如果我有一个"糟糕的运行"如果它不起作用，它将在我下次启动可执行文件时起作用。 

Sometimes if I have a "bad run" where it does not work, it will work when I next start up the executable. 

我已经安装了Visual Studio 2010或Visual Studio Express。 

I've had it happen either with Visual Studio 2010 or Visual Studio Express installed. 

踢球者是我有几台Windows 7机器要测试。我还没有在32位机器上遇到这个问题。  问题出现在我的64位计算机上，但没有发生在另一台计算机上 - 我无法弄清楚这两台计算机之间的差异是多少。  我不明白的是我如何通过"NuiInitialize"函数调用没有抛出错误 - IR永远不会打开，并且没有来自IR数据或RGB相机的帧信息。 

The kicker is that I have several Windows 7 machines to test with. I have not yet had this problem on a 32 bit machine.  The problem has occurred on one of my 64-bit machines, but not on another - I have not been able to figure out what the differences could be between the two machines.   What I don't understand is how I get past the "NuiInitialize" function call without throwing an error - the IR never gets turned on and there is no frame info coming from the IR data or RGB camera. 

有没有其他人看到过这种行为，或者有任何疑难解答建议？

Has anyone else seen this kind of behavior, or have any troubleshooting advice?

谢谢！

 

 

 

推荐答案

苏珊，我还没有看到这种行为之前，所以不幸的是我不认为我可以给你深入的故障排除建议。即使您没有插入任何其他USB设备，是否会发生这种情况？另外，你说你的所有64位机器都会出现这种情况吗？
您使用的是哪个版本的Windows 7？此外，所有这些机器都具有相同的软件配置吗？所有这些机器中都安装了哪些主要应用程序/硬件设备？在您安装任何其他软件或硬件设备之前，即使是在新机器上安装了
的新机器，是否会发生这种情况？

Susan, I haven't seen this behavior before, so unfortunately I don't think I can give you in depth troubleshooting advice. Does this happen even when you don't have any other USB devices plugged in? Also, you say that this happens with ALL your 64-bit machines? What version of Windows 7 are you using? Also, do all these machines have the same software configuration? What major applications/HW devices are installed in all of these machines? Does this happen for you even on a new machine, freshly installed with Windows 7, before you install any other software or HW devices?

我们会调查，所以谢谢详细信息。

Eddy

We'll investigate, so thanks for the detailed information.
Eddy

这篇关于在最新的beta补丁中初始化稳定性问题？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！