如何在输出文件中隐藏stargazer()信息 [英] How to suppress stargazer() information in output file
问题描述
我正在使用stargazer
包将R数据帧作为乳胶代码输出:
library(stargazer)
stargazer(mtcars)
这是输出
% Table created by StarGazer v.3.0.1 by Marek Hlavac, Harvard University. E-mail: hlavac at fas.harvard.edu
% Date and time: Thu, May 09, 2013 - 16:14:28
\begin{table}[htb] \centering
\caption{}
\label{}
\footnotesize
\begin{tabular}{@{\extracolsep{5pt}}l c c c c c }
\\[-1.8ex]\hline
\hline \\[-1.8ex]
Statistic & \multicolumn{1}{c}{N} & \multicolumn{1}{c}{Mean} & \multicolumn{1}{c}{St. Dev.} & \multicolumn{1}{c}{Min} & \multicolumn{1}{c}{Max} \\
\hline \\[-1.8ex]
mpg & 32 & 20.091 & 6.027 & 10.400 & 33.900 \\
cyl & 32 & 6.188 & 1.786 & 4 & 8 \\
disp & 32 & 230.722 & 123.939 & 71.100 & 472.000 \\
hp & 32 & 146.688 & 68.563 & 52 & 335 \\
drat & 32 & 3.597 & 0.535 & 2.760 & 4.930 \\
wt & 32 & 3.217 & 0.978 & 1.513 & 5.424 \\
qsec & 32 & 17.849 & 1.787 & 14.500 & 22.900 \\
vs & 32 & 0.438 & 0.504 & 0 & 1 \\
am & 32 & 0.406 & 0.499 & 0 & 1 \\
gear & 32 & 3.688 & 0.738 & 3 & 5 \\
carb & 32 & 2.812 & 1.615 & 1 & 8 \\
\hline \\[-1.8ex]
\normalsize
\end{tabular}
\end{table}
请注意,输出包括两行乳胶注释(前两行,以%开头).如何停止输出前两行(%开头)?
一个类似的问题,但有关xtable()的问题在这里被提出:解决方案
从4.0版开始(现已在CRAN上提供),您可以使用参数header = FALSE运行stargazer,以忽略Latex代码输出中的初始注释. /p>
I'm using the stargazer
package to output an R dataframe as latex code:
library(stargazer)
stargazer(mtcars)
And this is the output
% Table created by StarGazer v.3.0.1 by Marek Hlavac, Harvard University. E-mail: hlavac at fas.harvard.edu
% Date and time: Thu, May 09, 2013 - 16:14:28
\begin{table}[htb] \centering
\caption{}
\label{}
\footnotesize
\begin{tabular}{@{\extracolsep{5pt}}l c c c c c }
\\[-1.8ex]\hline
\hline \\[-1.8ex]
Statistic & \multicolumn{1}{c}{N} & \multicolumn{1}{c}{Mean} & \multicolumn{1}{c}{St. Dev.} & \multicolumn{1}{c}{Min} & \multicolumn{1}{c}{Max} \\
\hline \\[-1.8ex]
mpg & 32 & 20.091 & 6.027 & 10.400 & 33.900 \\
cyl & 32 & 6.188 & 1.786 & 4 & 8 \\
disp & 32 & 230.722 & 123.939 & 71.100 & 472.000 \\
hp & 32 & 146.688 & 68.563 & 52 & 335 \\
drat & 32 & 3.597 & 0.535 & 2.760 & 4.930 \\
wt & 32 & 3.217 & 0.978 & 1.513 & 5.424 \\
qsec & 32 & 17.849 & 1.787 & 14.500 & 22.900 \\
vs & 32 & 0.438 & 0.504 & 0 & 1 \\
am & 32 & 0.406 & 0.499 & 0 & 1 \\
gear & 32 & 3.688 & 0.738 & 3 & 5 \\
carb & 32 & 2.812 & 1.615 & 1 & 8 \\
\hline \\[-1.8ex]
\normalsize
\end{tabular}
\end{table}
Note the output includes two lines of latex comments (top two lines, beginning %). How can I stop the top two lines (beginning %) from being outputted?
A similar question, but concerning xtable() was asked here: Using table caption on R markdown file using knitr to use in pandoc to convert to pdf
From version 4.0 onwards (available on CRAN now), you can run stargazer with the argument header=FALSE to omit the initial comments in your Latex code ouput.
这篇关于如何在输出文件中隐藏stargazer()信息的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!