链接器命令失败,使用Flurry退出代码1 [英] Linker command fail, exit code 1 with Flurry
本文介绍了链接器命令失败,使用Flurry退出代码1的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!
问题描述
当我按照此处的说明导入Flurry时:
When I import Flurry as per the instructions here:
https://developer.yahoo.com/flurry/docs/integrateflurry/ios/
遵循所有说明并尝试运行后,出现以下错误:
I get the following error after following all the instructions and trying to run:
经过大量研究,我尝试了以下方法:
I have tried the following after much research:
- 在构建阶段检查我的编译源-一切正常
- 清理"并重新运行-没事
- 删除和重新导入-不好
- 检查我的骑行头是否在构建设置"中显示-一切正常
奇怪的是,当我创建一个全新的项目并按照相同的步骤进行操作时,我没有遇到相同的错误,并且编译并运行正常.
The weird thing is when I create a brand new project and follow the same steps I don't get the same error and the build compiles and runs just fine.
请提出任何想法!
这是长长的脱口秀:
推荐答案
已解决!
- 删除和删除"所有Flurry文件,包括桥接头文件
- 在构建阶段->'swift编译器'....删除对旧桥接头的引用
- 希望将Flury文件拖放到您的项目文件夹中,但不要将它们放入项目文件夹中.将它们放在您的项目文件夹之外,放入自己的文件中.
- 添加桥接头并#import"Flurry.h"
正常使用
这篇关于链接器命令失败,使用Flurry退出代码1的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!
查看全文