log4net输出文件，但不调试窗口 [英] log4net outputting file but not to debug window

问题描述

我试图从中获取错误输出，以显示在附加的日志文件中，也显示在调试窗口中.日志文件中的内容正常运行，但是调试窗口中均未显示任何内容.

I'm trying to get output from for errors to show up both in an appended logfile but also in the debug window. The logfile stuff is working correctly, but nothing every shows up in the debug window.

首先，这是我的配置

  <log4net>
    <!--
  This writes the log information to the console window.  It only logs events
  that are at least at the INFO level (which would mean that DEBUG events are not
  captured.
  -->
    <appender name="ConsoleAppender" type="log4net.Appender.ConsoleAppender">
      <layout type="log4net.Layout.PatternLayout">
        <conversionPattern value="%date{ABSOLUTE} [%thread] %level %logger - %message%newlineExtra Info: %property{testProperty}%newline%exception"/>
      </layout>
      <filter type="log4net.Filter.LevelRangeFilter">
        <levelMin value="DEBUG"/>
        <levelMax value="FATAL"/>
      </filter>
    </appender>
    <!--
  This stores information in the logfile.txt file.  It only captures log events
  that contain the key word test or error.
  -->
    <appender name="RollingFileAppender" type="log4net.Appender.RollingFileAppender">
      <file value="C:\TOPS\LOGFILES\logfile.txt"/>
      <appendToFile value="true"/>
      <rollingStyle value="Size"/>
      <maxSizeRollBackups value="5"/>
      <maximumFileSize value="10MB"/>
      <staticLogFileName value="true"/>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="test"/>
      </filter>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="error"/>
      </filter>
      <filter type="log4net.Filter.DenyAllFilter"/>
      <layout type="log4net.Layout.PatternLayout">
        <conversionPattern value="%date [%thread] %level %logger - %message%newline%exception"/>
      </layout>
    </appender>
    <root>
      <level value="DEBUG"/>
      <appender-ref ref="ConsoleAppender"/>
      <appender-ref ref="RollingFileAppender"/>
    </root>
  </log4net>

然后我用我的代码调用log4net

and then i call log4net in my code

        log.Debug("Debug error logging", ex);
        log.Info("Info error logging", ex);
        log.Warn("Warn error logging", ex);
        log.Error("Error error logging", ex);
        log.Fatal("Fatal error logging", ex);

这将在我的日志文件中创建5个条目，但在控制台窗口中没有任何条目.

this creates 5 entries in my logfile, but no entries in my console window.

我还修改了我的web.config，因此附加器尽可能相似，但我仍然得到完全相同的结果

i have also modified my web.config so the appenders were as similar as possible, but i still get the exact same results

  <log4net>
    <!--
  This writes the log information to the console window.  It only logs events
  that are at least at the INFO level (which would mean that DEBUG events are not
  captured.
  -->
    <appender name="ConsoleAppender" type="log4net.Appender.ConsoleAppender">
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="test"/>
      </filter>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="error"/>
      </filter>
      <filter type="log4net.Filter.DenyAllFilter"/>
      <layout type="log4net.Layout.PatternLayout">
        <conversionPattern value="%date [%thread] %level %logger - %message%newline%exception"/>
      </layout>
    </appender>
    <!--
  This stores information in the logfile.txt file.  It only captures log events
  that contain the key word test or error.
  -->
    <appender name="RollingFileAppender" type="log4net.Appender.RollingFileAppender">
      <file value="C:\TOPS\LOGFILES\logfile.txt"/>
      <appendToFile value="true"/>
      <rollingStyle value="Size"/>
      <maxSizeRollBackups value="5"/>
      <maximumFileSize value="10MB"/>
      <staticLogFileName value="true"/>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="test"/>
      </filter>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="error"/>
      </filter>
      <filter type="log4net.Filter.DenyAllFilter"/>
      <layout type="log4net.Layout.PatternLayout">
        <conversionPattern value="%date [%thread] %level %logger - %message%newline%exception"/>
      </layout>
    </appender>
    <root>
      <level value="DEBUG"/>
      <appender-ref ref="ConsoleAppender"/>
      <appender-ref ref="RollingFileAppender"/>
    </root>
  </log4net>

关于我可能错过的打破控制台输出的任何想法吗?

any ideas on what i may have missed that is breaking the console output?

找到了解决方案，如以下注释中通过make3所指出的.我混淆了控制台附加程序和跟踪附加程序，而这正是我真正想要的.这是更新的配置.

found the solution, as pointed out in the comments below by making3. i confused console appender and trace appender, which is what i was actually looking for. here's the updated config.

  <log4net>
    <!--
  This writes the log information to the console window.  It only logs events
  that are at least at the INFO level (which would mean that DEBUG events are not
  captured.
  -->
    <appender name="TraceAppender" type="log4net.Appender.TraceAppender">
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="test"/>
      </filter>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="error"/>
      </filter>
      <filter type="log4net.Filter.DenyAllFilter"/>
      <layout type="log4net.Layout.PatternLayout">
        <conversionPattern value="%date [%thread] %level %logger - %message%newline%exception"/>
      </layout>
    </appender>
    <!--
  This stores information in the logfile.txt file.  It only captures log events
  that contain the key word test or error.
  -->
    <appender name="RollingFileAppender" type="log4net.Appender.RollingFileAppender">
      <file value="C:\TOPS\LOGFILES\logfile.txt"/>
      <appendToFile value="true"/>
      <rollingStyle value="Size"/>
      <maxSizeRollBackups value="5"/>
      <maximumFileSize value="10MB"/>
      <staticLogFileName value="true"/>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="test"/>
      </filter>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="error"/>
      </filter>
      <filter type="log4net.Filter.DenyAllFilter"/>
      <layout type="log4net.Layout.PatternLayout">
        <conversionPattern value="%date [%thread] %level %logger - %message%newline%exception"/>
      </layout>
    </appender>
    <root>
      <level value="DEBUG"/>
      <appender-ref ref="ConsoleAppender"/>
      <appender-ref ref="TraceAppender"/>
    </root>
  </log4net>

推荐答案

找到了解决方案，如以下make3中的注释所指出.我混淆了控制台附加程序和跟踪附加程序，而这正是我真正想要的.这是更新的配置.

found the solution, as pointed out in the comments below by making3. i confused console appender and trace appender, which is what i was actually looking for. here's the updated config.

  <log4net>
    <!--
  This writes the log information to the console window.  It only logs events
  that are at least at the INFO level (which would mean that DEBUG events are not
  captured.
  -->
    <appender name="TraceAppender" type="log4net.Appender.TraceAppender">
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="test"/>
      </filter>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="error"/>
      </filter>
      <filter type="log4net.Filter.DenyAllFilter"/>
      <layout type="log4net.Layout.PatternLayout">
        <conversionPattern value="%date [%thread] %level %logger - %message%newline%exception"/>
      </layout>
    </appender>
    <!--
  This stores information in the logfile.txt file.  It only captures log events
  that contain the key word test or error.
  -->
    <appender name="RollingFileAppender" type="log4net.Appender.RollingFileAppender">
      <file value="C:\TOPS\LOGFILES\logfile.txt"/>
      <appendToFile value="true"/>
      <rollingStyle value="Size"/>
      <maxSizeRollBackups value="5"/>
      <maximumFileSize value="10MB"/>
      <staticLogFileName value="true"/>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="test"/>
      </filter>
      <filter type="log4net.Filter.StringMatchFilter">
        <stringToMatch value="error"/>
      </filter>
      <filter type="log4net.Filter.DenyAllFilter"/>
      <layout type="log4net.Layout.PatternLayout">
        <conversionPattern value="%date [%thread] %level %logger - %message%newline%exception"/>
      </layout>
    </appender>
    <root>
      <level value="DEBUG"/>
      <appender-ref ref="ConsoleAppender"/>
      <appender-ref ref="TraceAppender"/>
    </root>
  </log4net>

这篇关于log4net输出文件，但不调试窗口的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！