MariaDB Galera Cluster设置问题 [英] MariaDB Galera Cluster set up problems
问题描述
我正在尝试启动mariadb集群，但对我来说不起作用.现在，我在64位Red Hat ES6机器上使用MariaDB Galera 5.5.36.我在这里通过此仓库安装了mariadb:
I am trying to get a mariadb cluster up and running but it is not working out for me. Right now I am using MariaDB Galera 5.5.36 on a 64 bit red hat ES6 machine. I installed mariadb through this repo here:
[mariadb]
name = MariaDB
baseurl = http://yum.mariadb.org/5.5-galera/rhel6-amd64/
gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
gpgcheck=1
在server.conf中，我在服务器1中具有以下内容:
In the server.conf I have the following in server 1:
[mariadb]
log_error=/var/log/mariadb.log
query_cache_size=0
query_cache_type=0
binlog_format=ROW
default_storage_engine=innodb
innodb_autoinc_lock_mode=2
wsrep_provider=/usr/lib64/galera/libgalera_smm.so
wsrep_cluster_address=gcomm://192.168.211.133
wsrep_cluster_name='cluster'
wsrep_node_address='192.168.211.132'
wsrep_node_name='cluster1'
wsrep_sst_method=rsync
在服务器2上我有
[mariadb]
log_error=/var/log/mariadb.log
query_cache_size=0
query_cache_type=0
binlog_format=ROW
default_storage_engine=innodb
innodb_autoinc_lock_mode=2
wsrep_provider=/usr/lib64/galera/libgalera_smm.so
wsrep_cluster_address=gcomm://192.168.211.132
wsrep_cluster_name='cluster'
wsrep_node_address='192.168.211.133'
wsrep_node_name='cluster2'
wsrep_sst_method=rsync
当我使用以下命令启动服务器1时:sudo service mysql start --wsrep-new-cluster它可以正常启动，如果我打开mysql并检查wsrep的状态，则表示一切正常并正在运行，这是很好，但是当我尝试在第二台服务器上启动sudo服务mysql启动时，我在错误日志中得到以下信息:
When I start server 1 with the following command: sudo service mysql start --wsrep-new-cluster it starts up just fine, if I open up mysql and check the status of wsrep it says everything is up and running which is good but when I try to do sudo service mysql start on the second server I get the following in the error logs:
140609 14:47:55 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
140609 14:47:56 mysqld_safe WSREP: Running position recovery with --log_error='/var/lib/mysql/wsrep_recovery.i5qfm2' --pid-file='/var/lib/mysql/localhost.localdomain-recover.pid'
140609 14:47:57 mysqld_safe WSREP: Recovered position 85448d73-ebe8-11e3-9c20-fbc1995fee11:0
140609 14:47:57 [Note] WSREP: wsrep_start_position var submitted: '85448d73-ebe8-11e3-9c20-fbc1995fee11:0'
140609 14:47:57 [Note] WSREP: Read nil XID from storage engines, skipping position init
140609 14:47:57 [Note] WSREP: wsrep_load(): loading provider library '/usr/lib64/galera/libgalera_smm.so'
140609 14:47:57 [Note] WSREP: wsrep_load(): Galera 25.3.2(r170) by Codership Oy <info@codership.com> loaded successfully.
140609 14:47:57 [Note] WSREP: CRC-32C: using hardware acceleration.
140609 14:47:57 [Note] WSREP: Found saved state: 85448d73-ebe8-11e3-9c20-fbc1995fee11:-1
140609 14:47:57 [Note] WSREP: Passing config to GCS: base_host = 192.168.211.133; base_port = 4567; cert.log_conflicts = no; gcache.dir = /var/lib/mysql/; gcache.keep_pages_size = 0; gcache.mem_size = 0; gcache.name = /var/lib/mysql//galera.cache; gcache.page_size = 128M; gcache.size = 128M; gcs.fc_debug = 0; gcs.fc_factor = 1; gcs.fc_limit = 16; gcs.fc_master_slave = NO; gcs.max_packet_size = 64500; gcs.max_throttle = 0.25; gcs.recv_q_hard_limit = 9223372036854775807; gcs.recv_q_soft_limit = 0.25; gcs.sync_donor = NO; repl.causal_read_timeout = PT30S; repl.commit_order = 3; repl.key_format = FLAT8; repl.proto_max = 5
140609 14:47:57 [Note] WSREP: Assign initial position for certification: 0, protocol version: -1
140609 14:47:57 [Note] WSREP: wsrep_sst_grab()
140609 14:47:57 [Note] WSREP: Start replication
140609 14:47:57 [Note] WSREP: Setting initial position to 85448d73-ebe8-11e3-9c20-fbc1995fee11:0
140609 14:47:57 [Note] WSREP: protonet asio version 0
140609 14:47:57 [Note] WSREP: Using CRC-32C (optimized) for message checksums.
140609 14:47:57 [Note] WSREP: backend: asio
140609 14:47:57 [Note] WSREP: GMCast version 0
140609 14:47:57 [Note] WSREP: (0c085f34-efe5-11e3-9f6b-8bfd1706e2a4, 'tcp://0.0.0.0:4567') listening at tcp://0.0.0.0:4567
140609 14:47:57 [Note] WSREP: (0c085f34-efe5-11e3-9f6b-8bfd1706e2a4, 'tcp://0.0.0.0:4567') multicast: , ttl: 1
140609 14:47:57 [Note] WSREP: EVS version 0
140609 14:47:57 [Note] WSREP: PC version 0
140609 14:47:57 [Note] WSREP: gcomm: connecting to group 'cluster', peer '192.168.211.132:,192.168.211.134:'
140609 14:48:00 [Warning] WSREP: no nodes coming from prim view, prim not possible
140609 14:48:00 [Note] WSREP: view(view_id(NON_PRIM,0c085f34-efe5-11e3-9f6b-8bfd1706e2a4,1) memb {
0c085f34-efe5-11e3-9f6b-8bfd1706e2a4,0
} joined {
} left {
} partitioned {
})
140609 14:48:01 [Warning] WSREP: last inactive check more than PT1.5S ago (PT3.50775S), skipping check
140609 14:48:31 [Note] WSREP: view((empty))
140609 14:48:31 [ERROR] WSREP: failed to open gcomm backend connection: 110: failed to reach primary view: 110 (Connection timed out)
at gcomm/src/pc.cpp:connect():141
140609 14:48:31 [ERROR] WSREP: gcs/src/gcs_core.c:gcs_core_open():196: Failed to open backend connection: -110 (Connection timed out)
140609 14:48:31 [ERROR] WSREP: gcs/src/gcs.c:gcs_open():1291: Failed to open channel 'cluster' at 'gcomm://192.168.211.132,192.168.211.134': -110 (Connection timed out)
140609 14:48:31 [ERROR] WSREP: gcs connect failed: Connection timed out
140609 14:48:31 [ERROR] WSREP: wsrep::connect() failed: 7
140609 14:48:31 [ERROR] Aborting
140609 14:48:31 [Note] WSREP: Service disconnected.
140609 14:48:32 [Note] WSREP: Some threads may fail to exit.
140609 14:48:32 [Note] /usr/sbin/mysqld: Shutdown complete
140609 14:48:32 mysqld_safe mysqld from pid file /var/lib/mysql/localhost.localdomain.pid ended
我对为什么第二台服务器无法检测到群集已启动并正在运行感到困惑.这些机器可以很好地相互通信，我可以彼此进行SSH通讯，并且可以相互ping通.我尝试删除galera缓存，尝试降级我的mariadb galera版本，尝试禁用SELinux，尝试以其他用户身份运行mysql服务，验证是否打开了正确的端口，并尝试在具有不同IP地址的不同计算机上的2个VM上运行它们等等.有人知道这是怎么回事，因为我已经花了3天的时间试图解决此问题，但似乎没有解决方案对我有用.
I am at a loss as to why the second server cannot detect that a cluster is up and running. These machines can communicate with each other just fine, I can SSH from one to the other and they can ping each other. I tried deleted the galera cache, tried downgrading my version of mariadb galera, tried disabling SELinux, tried running the mysql service as a different user, verified that the correct ports are open, tried running them on 2 VMs on separate computers with different IP addresses, etc. Does anyone have any idea what is going on here because I have been searching for 3 days trying to fix this but no solution seems to work with me.
推荐答案
集群必须通过以下命令在主节点上启动:
The cluster must start by this command on primary node:
galera_new_cluster
启动第一个节点后，您可以成功启动集群中的其他节点.
after starting first node you can start other nodes in cluster successfully.
这篇关于MariaDB Galera Cluster设置问题的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
