如何恢复英特尔爱迪生板 [英] How to recover Intel Edison board

问题描述

我用buildroot(支持Edison开发板)替换了u-boot.elf，在板上刷新了英特尔的预编译src映像.

但是板卡固定在FSBL上(FSBL看门狗不断重启板).我尝试在板上执行闪存操作，但是板上没有提供侦听器来执行闪存操作(通常由u-boot中的dfu实用程序完成). 因此，我无法再次刷新预制的图像.

根据目前的情况，我该如何提升我的董事会?
如何再次刷新图像?

输入:

车载控制台o/p

******************************
PSH KERNEL VERSION: b0182b2b
            WR: 20104000
******************************

SCU IPC: 0x800000d0  0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 11:24:08 Feb  5 2015

******* PSH loader *******
PCM page cache size = 192 KB 
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application *** 

在FSBL中，是否存在任何类型的"dfu实用程序"?

任何帮助将不胜感激.

解决方案

对于安装fstk，我曾问过同样的问题.

请参阅下面提到的问题.

在ubuntu 16.04中安装XFSTK

与此同时，还接收了预装的垃圾箱，用于回收爱迪生板

I had flashed Intel's pre-built src images on board by replacing u-boot.elf compiled with buildroot(having support for Edison board).

But the board is stuck on FSBL(FSBL watchdog is continuously rebooting the board). I tried to flash on board, but on board no listener is present to serve flash operation (usually done by dfu utility in u-boot). So that I am not able to flash pre-built images again.

By this present conditions, how can I bring my board up?
How can I flash images again?

INPUT :

Board console o/p

******************************
PSH KERNEL VERSION: b0182b2b
            WR: 20104000
******************************

SCU IPC: 0x800000d0  0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 11:24:08 Feb  5 2015

******* PSH loader *******
PCM page cache size = 192 KB 
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application *** 

In FSBL, is there present any kind of "dfu utility"?

Any help will be appreciated.

解决方案

For installation fstk, I had asked question for the same.

Kindly refer Question mentioned below.

Install XFSTK in ubuntu 16.04

Along with this, prebuilt bins are received for recover edison board

这篇关于如何恢复英特尔爱迪生板的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！