ImageView scaleType ="fitXY";在Cardview内的棒棒糖前置设备中无法正常工作|安卓 [英] ImageView scaleType="fitXY" is not working in pre-lollipop device inside the Cardview | Android
问题描述
我有ImageView
在CardView
内部,如下所示.我的ImageView
scaleType ="fitXY"无法在棒棒糖设备上使用.但是在 Lollipop 设备上看起来更好.请看下面的图片.
正如我们在上图中看到的,在imageview周围有白色填充,我想删除它,我想在lolipop之前和lolipop之后的设备上看起来都一样.请帮助我解决这个问题.谢谢:)
I have ImageView
which is inside the CardView
as below in my code. My ImageView
scaleType="fitXY" is not working on pre-lollipop devices.But it looks better on Lollipop devices. Please look at below images.
As we see in above image there is white padding around the imageview which i want to remove, I want to look alike image on both pre-lolipop and post lolipop devices. Please help me to short out from the problem. Thanks :)
<android.support.v7.widget.CardView
android:layout_width="match_parent"
android:layout_height="160dp"
android:layout_marginRight="10dp"
android:layout_marginTop="6dp"
app:cardCornerRadius="10dp"
card_view:cardUseCompatPadding="false"
>
<ImageView
android:id="@+id/imgChat"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:scaleType="fitXY"
/>
</android.support.v7.widget.CardView>
推荐答案
由于问题不是在棒棒糖前置设备中出现的,所以我们可以在圆形Imageview中自定义ImageView
(如棒棒糖装置).我们可以检查操作系统并根据其自定义图像视图.
As the problem is not short out in pre-lollipop devices, We can customize the ImageView
in rounded Imageview(As in Lollipop devices). We can make the check of the OS and customize the imageview according it.
基本上,我们可以使用通用图像加载器 此 OR 滑动图片加载器 此创建应用程序.
Basically we can use the Universal image loader this OR Glide image loader this to create the application.
通用图像加载器提供了默认的RoundedCorners来创建ImageView的角点
Universal image loader provided the default RoundedCorners to create the corner of ImageView like this
ImageLoader imageLoader = ImageLoader.getInstance();
imageLoader.init(ImageLoaderConfiguration.createDefault(MainActivity.this));
DisplayImageOptions options = new DisplayImageOptions.Builder()
.displayer(new RoundedBitmapDisplayer(20))/// RoundedBitmapDisplayer IS THE CLASS BY WHICH , WE CAN CREATE THE ROUNDED CORNER OF THE IMAGEVIEW
.cacheInMemory(true)
.cacheOnDisk(true)
.build();
imageLoader.displayImage("http://thedeveloperworldisyours.com/wp-content/uploads/scareface.jpeg", YOUR_IMAGEVIEW,options);
在 Glide图像加载器中,我们需要创建Custom类来创建Imageview
的弧线,在此ImageView
In Glide image loader , we need to create the Custom class to create the arc of the Imageview
,In this link you find the Custom rounded class to create the rounded arc around the ImageView
Glide.with(this)
.load("http://thedeveloperworldisyours.com/wp-content/uploads/scareface.jpeg")
.bitmapTransform(new RoundedCornersTransformation( MainActivity.this,15, 2)) ///RoundedCornersTransformation IS THE CLASS, WHICH YOU NEED TO COPY INSIDE YOURS PROJECT, PLEASE FIND THIS CLASS ON ABOVE LINK AND I AM ALSO PROVIDING THE CLASS FOR IT
.into(YOUR_IMAGEVIEW);
要在滑行中创建圆角,我们需要在项目中复制以下类,我从此链接获得了该类
For creating the rounded corner in glide , we need to copy the below class in our project, I have got this class from this link
import android.content.Context;
import android.graphics.Bitmap;
import android.graphics.BitmapShader;
import android.graphics.Canvas;
import android.graphics.Paint;
import android.graphics.RectF;
import android.graphics.Shader;
import com.bumptech.glide.Glide;
import com.bumptech.glide.load.Transformation;
import com.bumptech.glide.load.engine.Resource;
import com.bumptech.glide.load.engine.bitmap_recycle.BitmapPool;
import com.bumptech.glide.load.resource.bitmap.BitmapResource;
/**
* Created by javiergonzalezcabezas on 2/4/16.
*/
public class RoundedCornersTransformation implements Transformation<Bitmap> {
public enum CornerType {
ALL,
TOP_LEFT, TOP_RIGHT, BOTTOM_LEFT, BOTTOM_RIGHT,
TOP, BOTTOM, LEFT, RIGHT,
OTHER_TOP_LEFT, OTHER_TOP_RIGHT, OTHER_BOTTOM_LEFT, OTHER_BOTTOM_RIGHT,
DIAGONAL_FROM_TOP_LEFT, DIAGONAL_FROM_TOP_RIGHT
}
private BitmapPool mBitmapPool;
private int mRadius;
private int mDiameter;
private int mMargin;
private CornerType mCornerType;
public RoundedCornersTransformation(Context context, int radius, int margin) {
this(context, radius, margin, CornerType.ALL);
}
public RoundedCornersTransformation(BitmapPool pool, int radius, int margin) {
this(pool, radius, margin, CornerType.ALL);
}
public RoundedCornersTransformation(Context context, int radius, int margin,
CornerType cornerType) {
this(Glide.get(context).getBitmapPool(), radius, margin, cornerType);
}
public RoundedCornersTransformation(BitmapPool pool, int radius, int margin,
CornerType cornerType) {
mBitmapPool = pool;
mRadius = radius;
mDiameter = mRadius * 2;
mMargin = margin;
mCornerType = cornerType;
}
@Override
public Resource<Bitmap> transform(Resource<Bitmap> resource, int outWidth, int outHeight) {
Bitmap source = resource.get();
int width = source.getWidth();
int height = source.getHeight();
Bitmap bitmap = mBitmapPool.get(width, height, Bitmap.Config.ARGB_8888);
if (bitmap == null) {
bitmap = Bitmap.createBitmap(width, height, Bitmap.Config.ARGB_8888);
}
Canvas canvas = new Canvas(bitmap);
Paint paint = new Paint();
paint.setAntiAlias(true);
paint.setShader(new BitmapShader(source, Shader.TileMode.CLAMP, Shader.TileMode.CLAMP));
drawRoundRect(canvas, paint, width, height);
return BitmapResource.obtain(bitmap, mBitmapPool);
}
private void drawRoundRect(Canvas canvas, Paint paint, float width, float height) {
float right = width - mMargin;
float bottom = height - mMargin;
switch (mCornerType) {
case ALL:
canvas.drawRoundRect(new RectF(mMargin, mMargin, right, bottom), mRadius, mRadius, paint);
break;
case TOP_LEFT:
drawTopLeftRoundRect(canvas, paint, right, bottom);
break;
case TOP_RIGHT:
drawTopRightRoundRect(canvas, paint, right, bottom);
break;
case BOTTOM_LEFT:
drawBottomLeftRoundRect(canvas, paint, right, bottom);
break;
case BOTTOM_RIGHT:
drawBottomRightRoundRect(canvas, paint, right, bottom);
break;
case TOP:
drawTopRoundRect(canvas, paint, right, bottom);
break;
case BOTTOM:
drawBottomRoundRect(canvas, paint, right, bottom);
break;
case LEFT:
drawLeftRoundRect(canvas, paint, right, bottom);
break;
case RIGHT:
drawRightRoundRect(canvas, paint, right, bottom);
break;
case OTHER_TOP_LEFT:
drawOtherTopLeftRoundRect(canvas, paint, right, bottom);
break;
case OTHER_TOP_RIGHT:
drawOtherTopRightRoundRect(canvas, paint, right, bottom);
break;
case OTHER_BOTTOM_LEFT:
drawOtherBottomLeftRoundRect(canvas, paint, right, bottom);
break;
case OTHER_BOTTOM_RIGHT:
drawOtherBottomRightRoundRect(canvas, paint, right, bottom);
break;
case DIAGONAL_FROM_TOP_LEFT:
drawDiagonalFromTopLeftRoundRect(canvas, paint, right, bottom);
break;
case DIAGONAL_FROM_TOP_RIGHT:
drawDiagonalFromTopRightRoundRect(canvas, paint, right, bottom);
break;
default:
canvas.drawRoundRect(new RectF(mMargin, mMargin, right, bottom), mRadius, mRadius, paint);
break;
}
}
private void drawTopLeftRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(mMargin, mMargin, mMargin + mDiameter, mMargin + mDiameter),
mRadius, mRadius, paint);
canvas.drawRect(new RectF(mMargin, mMargin + mRadius, mMargin + mRadius, bottom), paint);
canvas.drawRect(new RectF(mMargin + mRadius, mMargin, right, bottom), paint);
}
private void drawTopRightRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(right - mDiameter, mMargin, right, mMargin + mDiameter), mRadius,
mRadius, paint);
canvas.drawRect(new RectF(mMargin, mMargin, right - mRadius, bottom), paint);
canvas.drawRect(new RectF(right - mRadius, mMargin + mRadius, right, bottom), paint);
}
private void drawBottomLeftRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(mMargin, bottom - mDiameter, mMargin + mDiameter, bottom),
mRadius, mRadius, paint);
canvas.drawRect(new RectF(mMargin, mMargin, mMargin + mDiameter, bottom - mRadius), paint);
canvas.drawRect(new RectF(mMargin + mRadius, mMargin, right, bottom), paint);
}
private void drawBottomRightRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(right - mDiameter, bottom - mDiameter, right, bottom), mRadius,
mRadius, paint);
canvas.drawRect(new RectF(mMargin, mMargin, right - mRadius, bottom), paint);
canvas.drawRect(new RectF(right - mRadius, mMargin, right, bottom - mRadius), paint);
}
private void drawTopRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(mMargin, mMargin, right, mMargin + mDiameter), mRadius, mRadius,
paint);
canvas.drawRect(new RectF(mMargin, mMargin + mRadius, right, bottom), paint);
}
private void drawBottomRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(mMargin, bottom - mDiameter, right, bottom), mRadius, mRadius,
paint);
canvas.drawRect(new RectF(mMargin, mMargin, right, bottom - mRadius), paint);
}
private void drawLeftRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(mMargin, mMargin, mMargin + mDiameter, bottom), mRadius, mRadius,
paint);
canvas.drawRect(new RectF(mMargin + mRadius, mMargin, right, bottom), paint);
}
private void drawRightRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(right - mDiameter, mMargin, right, bottom), mRadius, mRadius,
paint);
canvas.drawRect(new RectF(mMargin, mMargin, right - mRadius, bottom), paint);
}
private void drawOtherTopLeftRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(mMargin, bottom - mDiameter, right, bottom), mRadius, mRadius,
paint);
canvas.drawRoundRect(new RectF(right - mDiameter, mMargin, right, bottom), mRadius, mRadius,
paint);
canvas.drawRect(new RectF(mMargin, mMargin, right - mRadius, bottom - mRadius), paint);
}
private void drawOtherTopRightRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(mMargin, mMargin, mMargin + mDiameter, bottom), mRadius, mRadius,
paint);
canvas.drawRoundRect(new RectF(mMargin, bottom - mDiameter, right, bottom), mRadius, mRadius,
paint);
canvas.drawRect(new RectF(mMargin + mRadius, mMargin, right, bottom - mRadius), paint);
}
private void drawOtherBottomLeftRoundRect(Canvas canvas, Paint paint, float right, float bottom) {
canvas.drawRoundRect(new RectF(mMargin, mMargin, right, mMargin + mDiameter), mRadius, mRadius,
paint);
canvas.drawRoundRect(new RectF(right - mDiameter, mMargin, right, bottom), mRadius, mRadius,
paint);
canvas.drawRect(new RectF(mMargin, mMargin + mRadius, right - mRadius, bottom), paint);
}
private void drawOtherBottomRightRoundRect(Canvas canvas, Paint paint, float right,
float bottom) {
canvas.drawRoundRect(new RectF(mMargin, mMargin, right, mMargin + mDiameter), mRadius, mRadius,
paint);
canvas.drawRoundRect(new RectF(mMargin, mMargin, mMargin + mDiameter, bottom), mRadius, mRadius,
paint);
canvas.drawRect(new RectF(mMargin + mRadius, mMargin + mRadius, right, bottom), paint);
}
private void drawDiagonalFromTopLeftRoundRect(Canvas canvas, Paint paint, float right,
float bottom) {
canvas.drawRoundRect(new RectF(mMargin, mMargin, mMargin + mDiameter, mMargin + mDiameter),
mRadius, mRadius, paint);
canvas.drawRoundRect(new RectF(right - mDiameter, bottom - mDiameter, right, bottom), mRadius,
mRadius, paint);
canvas.drawRect(new RectF(mMargin, mMargin + mRadius, right - mDiameter, bottom), paint);
canvas.drawRect(new RectF(mMargin + mDiameter, mMargin, right, bottom - mRadius), paint);
}
private void drawDiagonalFromTopRightRoundRect(Canvas canvas, Paint paint, float right,
float bottom) {
canvas.drawRoundRect(new RectF(right - mDiameter, mMargin, right, mMargin + mDiameter), mRadius,
mRadius, paint);
canvas.drawRoundRect(new RectF(mMargin, bottom - mDiameter, mMargin + mDiameter, bottom),
mRadius, mRadius, paint);
canvas.drawRect(new RectF(mMargin, mMargin, right - mRadius, bottom - mRadius), paint);
canvas.drawRect(new RectF(mMargin + mRadius, mMargin + mRadius, right, bottom), paint);
}
@Override public String getId() {
return "RoundedTransformation(radius=" + mRadius + ", margin=" + mMargin + ", diameter="
+ mDiameter + ", cornerType=" + mCornerType.name() + ")";
}
}
这篇关于ImageView scaleType ="fitXY";在Cardview内的棒棒糖前置设备中无法正常工作|安卓的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!