升级ClearCase后快照视图中的MVFS错误 [英] MVFS error in a snapshot view after upgradation of ClearCase

问题描述

我使用Rational ClearCase Explorer创建了一个快照视图。

I created a snapshot view using Rational ClearCase explorer.

创建它之后，我设置了配置规范，环境变量，后来尝试编译我的代码并获得了MVFS错误消息：

After creating it, I set the config specs, environmental variables and later tried compiling my code and got an MVFS error which says:

无法确定当前工作目录是否在MVFS中-没有此类设备或地址

当我为了消除此错误而搜索IBM网站时，发现快照视图未使用MVFS！

When I searched the IBM website for the sake of eliminating this error, I found out that a snapshot view does not use the MVFS !

当快照视图不使用MVFS时，为什么会出现此错误？

Why am I getting this error when Snapshot view does not use MVFS?

此问题触发后：实际上，在我们的项目中，我们使用的是ClearCase（8.0.0.7版）。尝试在8.0.0.7版本上构建代码时，我们从来没有遇到过问题。仅在将此版本升级到8.0.0.15之后，才出现生成问题。新旧ClearCases的遗产都是baseClearcase

When this issue got triggered: Actually in our project we were using a ClearCase (8.0.0.7 version). We never had problems when we tried to build our code on the 8.0.0.7 version. It was only after upgrading this version to 8.0.0.15 that the build issue has arisen. The legacy of both old and new ClearCases are baseClearcase

有关此问题的更多规范：
我们正在使用的服务器是Windows 2003服务器。我正在H驱动器（NTFS驱动器）中创建快照视图，因为C驱动器无法在我们的项目中使用，通过运行shell脚本clean_view.sh清理先前​​生成的文件，然后使用ClearCase命令<$编译我们的C代码c $ c> clearmake.exe全部。以前，我们曾经遵循过构建成功所用的相同过程，但是现在，相同的问题已成为一个问题。

Some more specifications regarding the issue: The server which we are using is a Windows 2003 server. I am creating a snapshot view in H drive (NTFS drive) as C drive is not available for use in our project, cleaning the previously built files by running the shell script clean_view.sh and then compiling our C code with the ClearCase command clearmake.exe all. Previously we used to follow the same procedure where build used to succeed, but now the same has become an issue.

这个问题是我之前提出的问题的扩展。我将这个问题作为一个整体重新发布，以使问题更加清晰，并使更多的ClearCase专家参与其中。请不要将其视为重复项，或者因为我的问题尚未解决而强制将其关闭。另外请注意，这是我第一次使用ClearCase。

This question is an extension to the question which I have asked previously. I am re-posting this question as a whole thing again in order to give more clarity about the issue and also for more number of ClearCase experts to chime-in. Kindly do not treat this as a duplicate one or force close it as my issue has not yet been resolved. Also please note that this is the first time I am working with ClearCase.

上一个问题的链接： 快照视图中的MVFS错误

推荐答案

最近，此问题的解决方案有所发展！我们在客户的帮助下将此问题上报给IBM。他们建议我们使用动态视图，然后使用它们。令我们惊讶的是，它运行良好，并且能够生成可执行文件。但是事实仍然是，我们不能使用快照视图！

Recently there was a development in the solution of this issue !! We escalated this issue to IBM with the help of our client. They suggested us to use Dynamic views and we used them. To our surprise it was working fine and we are able to generate the executables. But the fact still remains that we are not able to use snapshot views !!

注意：此评论仅是分享我对此问题的知识和经验。 ：）

NOTE: This comment is just to share my knowledge and experience regarding this issue. :)

这篇关于升级ClearCase后快照视图中的MVFS错误的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！