KVM/桥:没有路由到主机 [英] KVM/Bridge: No Route To Host

查看:233
本文介绍了KVM/桥:没有路由到主机的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

我已经在Fedora 17上使用KVM设置了VM,并为KVM配置了桥接网络.主机和VM都使用手动IP配置,主机的IP为192.168.0.2,VM的为192.168.0.10. 从VM可以毫无问题地连接到主机,但是即使可以从主机ping KVM,也不能从主机SSH到VM.尝试ssh只会给我结果没有路由到主机".

I've setup a VM on Fedora 17 with KVM and have configured a bridge network for the KVM. Both the host and the VM use manual IP configuration, with the host's IP as 192.168.0.2, the VM's 192.168.0.10. From the VM I can connect to the host without any problems, but from the host I can't SSH to the VM,even though I still can ping the KVM from the host. Trying to ssh just gives me the result "no route to host".

哦,我禁用了iptables,所以我不认为这是防火墙的问题.

Oh, I have iptables disabled so I don't think this is the problem of the firewall.

推荐答案

还要确保已为内核配置了IP转发:

Also ensure that the kernel is configure for ip forwarding:

$ sudo sysctl -a | grep net.ipv4.ip_forward
net.ipv4.ip_forward = 1

它的值应为1,而不是0.如果需要,请使用以下命令启用:

It should have a value of 1, not 0. If needed, enable with these commands:

echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.conf
sudo sysctl -p /etc/sysctl.conf

这篇关于KVM/桥:没有路由到主机的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆