使用 OpenSSL 和 MSVC2017 构建 QT 源 [英] Build QT Source with OpenSSL and MSVC2017
本文介绍了使用 OpenSSL 和 MSVC2017 构建 QT 源的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我设法编译 openssl-1.0.2o(使用 nasm-2.13.03)，如下所示:https://wiki.qt.io/Building_Qt_Desktop_for_Windows_with_MSVC
I managed to compile openssl-1.0.2o (using nasm-2.13.03) like shown here: https://wiki.qt.io/Building_Qt_Desktop_for_Windows_with_MSVC
然而，当尝试使用以下命令进行配置时，尝试构建 Qt-Source 已经失败(它无需 ssl/openssl):
However trying to build the Qt-Source already fails when trying to configure using the following command (it works without ssl/openssl):
C:/qt-everywhere-src-5.11.1/configure -platform win32-msvc2017 -prefix win32-msvc2017 -opensource -confirm-license -debug-and-release -force-debug-info -nomake examples -nomake tests -skip qtwebengine -skip qt3d -I C:\openssl-1.0.2o\out32dll -L C:\openssl-1.0.2o\out32dll -ssl -openssl
在命令行中出现以下错误:
with the following Error in command line:
Note: No wayland-egl support detected. Cross-toolkit compatibility disabled.
ERROR: Feature 'openssl' was enabled, but the pre-condition '!features.securetransport && (features.openssl-linked || libs.openssl_headers)' failed.
ERROR: Feature 'ssl' was enabled, but the pre-condition 'config.winrt || features.securetransport || features.openssl' failed.
config.log 显示它因为alloca.h"而失败
the config.log reveals it fails because of an "alloca.h"
Command line: -platform win32-msvc2017 -prefix win32-msvc -opensource -confirm-license -debug-and-release -force-debug-info -nomake examples -nomake tests -skip qtwebengine -skip qt3d -I C:\openssl-1.0.2o\out32dll -L C:\openssl-1.0.2o\out32dll -ssl -openssl
loaded result for config test config.qtbase.tests.verifyspec
+ cd /d C:\qt_build\config.tests\verifyspec && C:\qt_build\qtbase\bin\qmake.exe "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" "QMAKE_LIBDIR += C:\\openssl-1.0.2o\\out32dll" "INCLUDEPATH += C:\\openssl-1.0.2o\\out32dll" C:/Entwicklung/qt-everywhere-src-5.11.1/qtbase/config.tests/verifyspec
+ cd /d C:\qt_build\config.tests\verifyspec && set MAKEFLAGS=& jom clean && set MAKEFLAGS=& jom
> jom 1.1.2 - empower your cores
> del verifyspec.obj
> del verifyspec.exp verifyspec.vc.pdb verifyspec.ilk verifyspec.idb
> C:\qt_build\config.tests\verifyspec\verifyspec.exp konnte nicht gefunden werden
> jom 1.1.2 - empower your cores
> cl -c -nologo -Zc:wchar_t -FS -Zc:rvalueCast -Zc:inline -Zc:strictStrings -Zc:throwingNew -Zc:referenceBinding -Zi -MDd -W0 -EHsc /Fdverifyspec.vc.pdb -DUNICODE -D_UNICODE -DWIN32 -IC:\qt-everywhere-src-5.11.1\qtbase\config.tests\verifyspec -I. -IC:\openssl-1.0.2o\out32dll -IC:\qt-everywhere-src-5.11.1\qtbase\mkspecs\win32-msvc -Fo @C:\Users\msrei\AppData\Local\Temp\verifyspec.obj.5420.0.jom
> verifyspec.cpp
> link /NOLOGO /DYNAMICBASE /NXCOMPAT /DEBUG /SUBSYSTEM:CONSOLE "/MANIFESTDEPENDENCY:type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' publicKeyToken='6595b64144ccf1df' language='*' processorArchitecture='*'" /MANIFEST:embed /OUT:verifyspec.exe @C:\Users\msrei\AppData\Local\Temp\verifyspec.exe.5420.328.jom
test config.qtbase.tests.verifyspec succeeded
loaded result for config test config.qtbase.tests.architecture
+ cd /d C:\qt_build\config.tests\arch && C:\qt_build\qtbase\bin\qmake.exe "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" "QMAKE_LIBDIR += C:\\openssl-1.0.2o\\out32dll" "INCLUDEPATH += C:\\openssl-1.0.2o\\out32dll" C:/Entwicklung/qt-everywhere-src-5.11.1/qtbase/config.tests/arch
+ cd /d C:\qt_build\config.tests\arch && set MAKEFLAGS=& jom clean && set MAKEFLAGS=& jom
> jom 1.1.2 - empower your cores
> del arch.obj
> del arch.exp arch.vc.pdb arch.ilk arch.idb
> C:\qt_build\config.tests\arch\arch.exp konnte nicht gefunden werden
> jom 1.1.2 - empower your cores
> cl -c -nologo -Zc:wchar_t -FS -Zc:rvalueCast -Zc:inline -Zc:strictStrings -Zc:throwingNew -Zc:referenceBinding -Zi -MDd -W0 -EHsc /Fdarch.vc.pdb -DUNICODE -D_UNICODE -DWIN32 -IC:\qt-everywhere-src-5.11.1\qtbase\config.tests\arch -I. -IC:\openssl-1.0.2o\out32dll -IC:\qt-everywhere-src-5.11.1\qtbase\mkspecs\win32-msvc -Fo @C:\Users\msrei\AppData\Local\Temp\arch.obj.12860.0.jom
> arch.cpp
> link /NOLOGO /DYNAMICBASE /NXCOMPAT /DEBUG /SUBSYSTEM:CONSOLE "/MANIFESTDEPENDENCY:type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' publicKeyToken='6595b64144ccf1df' language='*' processorArchitecture='*'" /MANIFEST:embed /OUT:arch.exe @C:\Users\msrei\AppData\Local\Temp\arch.exe.12860.94.jom
Detected architecture: i386 (sse sse2)
test config.qtbase.tests.architecture gave result i386
loaded result for config test config.qtbase.tests.sse2
+ cd /d C:\qt_build\config.tests\x86_simd && C:\qt_build\qtbase\bin\qmake.exe "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" "QMAKE_LIBDIR += C:\\openssl-1.0.2o\\out32dll" "INCLUDEPATH += C:\\openssl-1.0.2o\\out32dll" "CONFIG+=add_cflags" "DEFINES+=NO_ATTRIBUTE" "SIMD=sse2" C:/Entwicklung/qt-everywhere-src-5.11.1/qtbase/config.tests/x86_simd
+ cd /d C:\qt_build\config.tests\x86_simd && set MAKEFLAGS=& jom clean && set MAKEFLAGS=& jom
> jom 1.1.2 - empower your cores
> del main.obj
> del x86_simd.exp x86_simd.vc.pdb x86_simd.ilk x86_simd.idb
> C:\qt_build\config.tests\x86_simd\x86_simd.exp konnte nicht gefunden werden
> jom 1.1.2 - empower your cores
> cl -c -nologo -Zc:wchar_t -FS -Zc:rvalueCast -Zc:inline -Zc:strictStrings -Zc:throwingNew -Zc:referenceBinding -arch:SSE2 -Zi -MDd -W0 -EHsc /Fdx86_simd.vc.pdb -DUNICODE -D_UNICODE -DWIN32 -DNO_ATTRIBUTE -DQT_COMPILER_SUPPORTS_SSE2 -IC:\qt-everywhere-src-5.11.1\qtbase\config.tests\x86_simd -I. -IC:\openssl-1.0.2o\out32dll -IC:\qt-everywhere-src-5.11.1\qtbase\mkspecs\win32-msvc -Fo @C:\Users\msrei\AppData\Local\Temp\main.obj.11032.0.jom
> main.cpp
> link /NOLOGO /DYNAMICBASE /NXCOMPAT /DEBUG /SUBSYSTEM:CONSOLE "/MANIFESTDEPENDENCY:type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' publicKeyToken='6595b64144ccf1df' language='*' processorArchitecture='*'" /MANIFEST:embed /OUT:x86_simd.exe @C:\Users\msrei\AppData\Local\Temp\x86_simd.exe.11032.109.jom
test config.qtbase.tests.sse2 succeeded
loaded result for config test config.qtbase.tests.aesni
+ cd /d C:\qt_build\config.tests\x86_simd && C:\qt_build\qtbase\bin\qmake.exe "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" "QMAKE_LIBDIR += C:\\openssl-1.0.2o\\out32dll" "INCLUDEPATH += C:\\openssl-1.0.2o\\out32dll" "CONFIG+=add_cflags" "DEFINES+=NO_ATTRIBUTE" "SIMD=aesni" C:/Entwicklung/qt-everywhere-src-5.11.1/qtbase/config.tests/x86_simd
+ cd /d C:\qt_build\config.tests\x86_simd && set MAKEFLAGS=& jom clean && set MAKEFLAGS=& jom
> jom 1.1.2 - empower your cores
> del main.obj
> del x86_simd.exp x86_simd.vc.pdb x86_simd.ilk x86_simd.idb
> jom 1.1.2 - empower your cores
> cl -c -nologo -Zc:wchar_t -FS -Zc:rvalueCast -Zc:inline -Zc:strictStrings -Zc:throwingNew -Zc:referenceBinding -arch:SSE2 -Zi -MDd -W0 -EHsc /Fdx86_simd.vc.pdb -DUNICODE -D_UNICODE -DWIN32 -DNO_ATTRIBUTE -DQT_COMPILER_SUPPORTS_AESNI -IC:\qt-everywhere-src-5.11.1\qtbase\config.tests\x86_simd -I. -IC:\openssl-1.0.2o\out32dll -IC:\qt-everywhere-src-5.11.1\qtbase\mkspecs\win32-msvc -Fo @C:\Users\msrei\AppData\Local\Temp\main.obj.16356.0.jom
> main.cpp
> link /NOLOGO /DYNAMICBASE /NXCOMPAT /DEBUG /SUBSYSTEM:CONSOLE "/MANIFESTDEPENDENCY:type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' publicKeyToken='6595b64144ccf1df' language='*' processorArchitecture='*'" /MANIFEST:embed /OUT:x86_simd.exe @C:\Users\msrei\AppData\Local\Temp\x86_simd.exe.16356.93.jom
test config.qtbase.tests.aesni succeeded
loaded result for config test config.qtbase.tests.alloca_h
+ cd /d C:\qt_build\config.tests\alloca_h && C:\qt_build\qtbase\bin\qmake.exe "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" "QMAKE_LIBDIR += C:\\openssl-1.0.2o\\out32dll" "INCLUDEPATH += C:\\openssl-1.0.2o\\out32dll" C:/Entwicklung/qt_build/config.tests/alloca_h
+ cd /d C:\qt_build\config.tests\alloca_h && set MAKEFLAGS=& jom clean && set MAKEFLAGS=& jom
> jom 1.1.2 - empower your cores
> del main.obj
> C:\qt_build\config.tests\alloca_h\main.obj konnte nicht gefunden werden
> del alloca_h.exp alloca_h.vc.pdb alloca_h.ilk alloca_h.idb
> C:\qt_build\config.tests\alloca_h\alloca_h.exp konnte nicht gefunden werden
> jom 1.1.2 - empower your cores
> cl -c -nologo -Zc:wchar_t -FS -Zc:rvalueCast -Zc:inline -Zc:strictStrings -Zc:throwingNew -Zc:referenceBinding -Zi -MDd -W0 -EHsc /Fdalloca_h.vc.pdb -DUNICODE -D_UNICODE -DWIN32 -I. -IC:\openssl-1.0.2o\out32dll -IC:\qt-everywhere-src-5.11.1\qtbase\mkspecs\win32-msvc -Fo @C:\Users\msrei\AppData\Local\Temp\main.obj.14548.0.jom
> main.cpp
> main.cpp(2): fatal error C1083: Datei (Include) kann nicht ge"ffnet werden: "alloca.h": No such file or directory
> jom: C:\qt_build\config.tests\alloca_h\Makefile [main.obj] Error 2
test config.qtbase.tests.alloca_h FAILED
推荐答案
它使用 openssl 1.0.2 配置如下:
It worked using openssl 1.0.2 configured like this:
CALL "C:\Program Files (x86)\Microsoft Visual Studio\2017\BuildTools\VC\Auxiliary\Build\vcvarsall.bat" x86
perl Configure VC-WIN32 --prefix=C:/openssl
nmake -f ms/ntdll.mak
nmake -f ms/ntdll.mak install
这个配置:
D:/qt-everywhere-src-5.10.0/configure -platform win32-msvc2017 -prefix win32-msvc2017 -opensource -confirm-license -debug-and-release -force-debug-info -nomake examples -nomake tests -skip qtwebengine -skip qt3d -ssl -openssl-linked OPENSSL_PREFIX=C:\openssl
要在带有 MSVC2017 的 Qt 项目中使用它，请将其添加到您的项目 .pro 文件中
for using it in a Qt-Project with MSVC2017 add this to your projects .pro file
win32-msvc* {
LIBS += -LC:/openssl/lib/ -llibeay32
LIBS += -LC:/openssl/lib/ -lssleay32
INCLUDEPATH += C:/openssl/include
}
这篇关于使用 OpenSSL 和 MSVC2017 构建 QT 源的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
