在 Ubuntu PHP 中启用 PCNTL - 测试失败 [英] Enable PCNTL in Ubuntu PHP - test fails

问题描述

我需要关于如何:在 Ubuntu PHP 中启用 PCNTL 的帮助.

I need help on How to: Enable PCNTL in Ubuntu PHP.

$ mkdir /tmp/phpsource
$ cd /tmp/phpsource


$ wget http://museum.php.net/php5/php-5.3.2.tar.gz
$ tar xvf php-5.3.2.tar.gz
$ cd php-5.3.2/ext/pcntl


$ phpize   -bash: phpize: command not found

一切都很顺利，直到我尝试运行 phpize！然后我收到错误'-bash: phpize: command not found' ??有什么想法吗?

Everything went fine until I tried to run phpize! And then I get the error '-bash: phpize: command not found' ?? Any ideas?

更新运行:

$ sudo apt-get update

然后运行:

$ sudo apt-get install php5-dev

在尼克的帮助下，我设法完成了程序.但是'make test'失败了???

With the help of Nick I managed to finish the procedure. But 'make test' fails???

$ phpize
$ ./configure
$ make

$ cp modules/pcntl.so /usr/lib/php5/20090626/
$ echo "extension=pcntl.so" > /etc/php5/conf.d/pcntl.ini

$ make test - FAILED!

帮助:我输入'echo "extension=pcntl.so >/etc/php5/conf.d/pcntl.ini' 而不是'echo "extension=pcntl.so" >/etc/php5/conf.d/pcntl.ini' 我第一次运行这个.那不好吗?

HELP: I typed 'echo "extension=pcntl.so > /etc/php5/conf.d/pcntl.ini' instead of 'echo "extension=pcntl.so" > /etc/php5/conf.d/pcntl.ini' the first time I ran this. Is that BAD?

--------------------------------- 制作测试错误信息 ---------------------------------------

--------------------------------- Make TEst Error Messages --------------------------------------

PHP Deprecated: Comments starting with '#' are deprecated in /tmp/phpsource/php-5.3.2/ext/pcntl/tmp-php.ini on line 1850 in Unknown on line 0
PHP Deprecated: Comments starting with '#' are deprecated in /tmp/phpsource/php-5.3.2/ext/pcntl/tmp-php.ini on line 1852 in Unknown on line 0
PHP Deprecated: Comments starting with '#' are deprecated in /tmp/phpsource/php-5.3.2/ext/pcntl/tmp-php.ini on line 1850 in Unknown on line 0
PHP Deprecated: Comments starting with '#' are deprecated in /tmp/phpsource/php-5.3.2/ext/pcntl/tmp-php.ini on line 1852 in Unknown on line 0
PHP Warning: Module 'pcntl' already loaded in Unknown on line 0

Warning: Module 'pcntl' already loaded in Unknown on line 0
PHP Deprecated: Comments starting with '#' are deprecated in /tmp/phpsource/php-5.3.2/ext/pcntl/tmp-php.ini on line 1850 in Unknown on line 0
PHP Deprecated: Comments starting with '#' are deprecated in /tmp/phpsource/php-5.3.2/ext/pcntl/tmp-php.ini on line 1852 in Unknown on line 0
PHP Warning: Module 'pcntl' already loaded in Unknown on line 0

Warning: Module 'pcntl' already loaded in Unknown on line 0

=====================================================================
PHP : /usr/bin/php
PHP_SAPI : cli
PHP_VERSION : 5.3.2-1ubuntu4.18
ZEND_VERSION: 2.3.0
PHP_OS : Linux - Linux lvps217-8-253-63.vps.webfusion.co.uk 2.6.32-042stab068.8 #1 SMP Fri Dec 7 17:06:14 MSK 2012 x86_64
INI actual : /tmp/phpsource/php-5.3.2/ext/pcntl/tmp-php.ini
More .INIs :
CWD : /tmp/phpsource/php-5.3.2/ext/pcntl
Extra dirs :
VALGRIND : Not used
=====================================================================
TIME START 2013-01-02 23:05:56
=====================================================================
FAIL Test pcntl wait functionality [tests/001.phpt]
FAIL pcntl: pcntl_sigprocmask(), pcntl_sigwaitinfo(), pcntl_sigtimedwait() [tests/002.phpt]
FAIL pcntl: SIG_BLOCK, SIG_UNBLOCK, SIG_SETMASK [tests/003.phpt]
FAIL Bug #47566 (return value of pcntl_wexitstatus()) [tests/bug47566.phpt]
FAIL pcntl_alarm() [tests/pcntl_alarm.phpt]
FAIL pcntl_exec() [tests/pcntl_exec.phpt]
FAIL pcntl_exec() 2 [tests/pcntl_exec_2.phpt]
FAIL pcntl_exec() 3 [tests/pcntl_exec_3.phpt]
FAIL Test function pcntl_fork() by calling it with its expected arguments [tests/pcntl_fork_basic.phpt]
FAIL Test function pcntl_fork() by testing the process isolation in the forking hierarchy father -> son -> grandson where father can not knows his grandson [tests/pcntl_fork_variation.phpt]
FAIL pcntl_signal() [tests/pcntl_signal.phpt]
FAIL pcnt_signal_dispatch() [tests/pcntl_signal_dispatch.phpt]
FAIL pcntl_wait() [tests/pcntl_wait.phpt]
FAIL Closures as a signal handler [tests/signal_closure_handler.phpt]
=====================================================================
TIME END 2013-01-02 23:05:59

=====================================================================
TEST RESULT SUMMARY
---------------------------------------------------------------------
Exts skipped : 0
Exts tested : 44
---------------------------------------------------------------------

Number of tests : 14 14
Tests skipped : 0 ( 0.0%) --------
Tests warned : 0 ( 0.0%) ( 0.0%)
Tests failed : 14 (100.0%) (100.0%)
Expected fail : 0 ( 0.0%) ( 0.0%)
Tests passed : 0 ( 0.0%) ( 0.0%)
---------------------------------------------------------------------
Time taken : 3 seconds
=====================================================================

=====================================================================
FAILED TEST SUMMARY
---------------------------------------------------------------------
Test pcntl wait functionality [tests/001.phpt]
pcntl: pcntl_sigprocmask(), pcntl_sigwaitinfo(), pcntl_sigtimedwait() [tests/002.phpt]
pcntl: SIG_BLOCK, SIG_UNBLOCK, SIG_SETMASK [tests/003.phpt]
Bug #47566 (return value of pcntl_wexitstatus()) [tests/bug47566.phpt]
pcntl_alarm() [tests/pcntl_alarm.phpt]
pcntl_exec() [tests/pcntl_exec.phpt]
pcntl_exec() 2 [tests/pcntl_exec_2.phpt]
pcntl_exec() 3 [tests/pcntl_exec_3.phpt]
Test function pcntl_fork() by calling it with its expected arguments [tests/pcntl_fork_basic.phpt]
Test function pcntl_fork() by testing the process isolation in the forking hierarchy father -> son -> grandson where father can not knows his grandson [tests/pcntl_fork_variation.phpt]
pcntl_signal() [tests/pcntl_signal.phpt]
pcnt_signal_dispatch() [tests/pcntl_signal_dispatch.phpt]
pcntl_wait() [tests/pcntl_wait.phpt]
Closures as a signal handler [tests/signal_closure_handler.phpt]

任何想法！?！卡尔

推荐答案

这是我在 Ubuntu 12.04 中发现的:

Here's what I've found in Ubuntu 12.04:

• 检查您的 PHP.ini 是否禁用了 pnctl 功能.

• Check your PHP.ini for the pnctl functions being disabled.

<代码> disable_functions选项= pcntl_alarm，pcntl_fork，pcntl_waitpid，pcntl_wait，pcntl_wifexited，pcntl_wifstopped，pcntl_wifsignaled，pcntl_wexitstatus，pcntl_wtermsig，pcntl_wstopsig，pcntl_signal，pcntl_signal_dispatch，pcntl_get_last_error，pcntl_strerror，pcntl_sigprocmask，pcntl_sigwaitinfo，pcntl_sigtimedwait，pcntl_exec，pcntl_getpriority，pcntl_setpriority

phpinfo 报告该函数已经加载，但如果不将 pcntl.ini 文件放入/etc/php5/conf.d，它实际上将无法运行.

phpinfo reports the function is already loaded but it will not actually work without putting the pcntl.ini file into /etc/php5/conf.d.

遗憾的是，每次/etc/cron.d 中的 PHP 会话清理 cron 启动时，这都会导致模块已加载"错误，但是如果没有这两个部分，PCNTL 将无法运行，到目前为止我还没有找到了一个很好的解决方案来禁用已加载"错误.它凌乱，丑陋，垃圾邮件我的根邮件，当我找到解决方案时，我会发布它.到目前为止，我只在 12.04 中遇到过这个问题.

Sadly, this causes 'module already loaded' errors every time PHP session cleanup cron in /etc/cron.d kicks off, but PCNTL won't function without both of these pieces in place, and so far I haven't found a good solution to disable the 'already loaded' error. Its messy, and ugly, and spams my root mail, and when I can find a solution, I will post it. I've only run into this problem in 12.04 so far.

更新

我破解了我的/usr/lib/php5/maxlifetime 脚本文件以阻止垃圾邮件与 pnctl 错误(PHP 警告:模块 'pcntl' 已加载到第 0 行的未知中).以下是我的编辑 - 我专门添加到E_DEPRECATED"行中以消除消息.

I hacked my /usr/lib/php5/maxlifetime script file to stop spamming with pnctl errors (PHP Warning: Module 'pcntl' already loaded in Unknown on line 0). Here are my edits - I specifically added in the 'E_DEPRECATED' line to quiet the messages.

第 8 行:

    cur=$(php5 -c /etc/php5/${sapi}/php.ini -d "error_reporting='E_ALL & ~E_DEPRECATED'" -r 'print ini_get("session.gc_maxlifetime");' 2> /dev/null)

这篇关于在 Ubuntu PHP 中启用 PCNTL - 测试失败的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！