启用/禁用 Microsoft 虚拟 WiFi 微型端口 [英] Enabling/Disabling Microsoft Virtual WiFi Miniport

问题描述

我从 Control Panel\Network and Internet\Network Connections 禁用了我的 Microsoft Virtual WiFi Miniport 网络适配器.

I disabled my Microsoft Virtual WiFi Miniport network adapter from Control Panel\Network and Internet\Network Connections.

只需右键单击微型端口网卡并单击禁用，它就消失了.现在我怎么能启用它?禁用网卡后，netsh wlan start hostingnetwork 不再工作.得到的答复是，

Just right clicked on the miniport nic and clicked disable, and its gone. Now how could I enable it? After disabling the nic, netsh wlan start hostednetwork is not working any more. The response is,

无法启动托管网络.组或资源的状态不正确，无法执行请求的操作.

在我禁用适配器之前，它运行良好，无论如何，作为参考，这里是输出netsh wlan 显示驱动程序，

It was working flawlessly, before I disabled the adapter, Anyway, for reference here is the output of netsh wlan show drivers,

接口名称:Wi-Fi

Driver                    : Qualcomm Atheros AR9285 Wireless Network Adapter
Vendor                    : Qualcomm Atheros Communications Inc.
Provider                  : Microsoft
Date                      : 7/3/2012
Version                   : 3.0.0.130
INF file                  : C:\Windows\INF\netathrx.inf
Files                     : 2 total
                            C:\Windows\system32\DRIVERS\athrx.sys
                            C:\Windows\system32\drivers\vwifibus.sys
Type                      : Native Wi-Fi Driver
Radio types supported     : 802.11b 802.11g 802.11n
FIPS 140-2 mode supported : Yes
802.11w Management Frame Protection supported : Yes
Hosted network supported  : Yes
Authentication and cipher supported in infrastructure mode:
                            Open            None
                            Open            WEP-40bit
                            Open            WEP-104bit
                            Open            WEP
                            WPA-Enterprise  TKIP
                            WPA-Personal    TKIP
                            WPA2-Enterprise TKIP
                            WPA2-Personal   TKIP
                            Vendor defined  TKIP
                            WPA2-Enterprise Vendor defined
                            Vendor defined  Vendor defined
                            WPA-Enterprise  CCMP
                            WPA-Personal    CCMP
                            WPA2-Enterprise CCMP
                            Vendor defined  CCMP
                            WPA2-Enterprise Vendor defined
                            Vendor defined  Vendor defined
                            WPA2-Personal   CCMP
                            Vendor defined  Vendor defined
Authentication and cipher supported in ad-hoc mode:
                            Open            None
                            Open            WEP-40bit
                            Open            WEP-104bit
                            Open            WEP
                            WPA2-Personal   CCMP
                            Vendor defined  Vendor defined

netsh wlan show hostsnetwork,

Mode                   : Allowed
SSID name              : "aczire"
Max number of clients  : 100
Authentication         : WPA2-Personal
Cipher                 : CCMP

托管网络状态

Status                 : Not available

执行后，

netsh wlan 设置托管网络模式=允许

托管网络模式已设置为允许.

但又进来了，

netsh wlan 显示托管网络

Mode                   : Allowed
SSID name              : "aczire"
Max number of clients  : 100
Authentication         : WPA2-Personal
Cipher                 : CCMP

托管网络状态

Status                 : Not available

netsh wlan 显示设置

Show blocked networks in visible network list: No
Only use GP profiles on GP-configured networks: No
Hosted network mode allowed in WLAN service: Yes
Allow shared user credentials for network authentication: Yes
Block period: Not Configured.
Auto configuration logic is enabled on interface "Wi-Fi"

知道如何重新启用 Microsoft Virtual WiFi Miniport 适配器(在 Windows 8 Pro RTM 中)?我无能为力，请帮忙:(

Any idea how to re-enable the Microsoft Virtual WiFi Miniport adapter (in Windows 8 Pro RTM)? I'm at my wits end, Please help :(

推荐答案

你去你的设备管理器"，找到你的网络适配器"，然后应该找到虚拟wifi适配器，然后右键单击它并启用它.之后，您以管理员权限启动您的 cmd，然后尝试:

You go to your "device manager", find your "network adapters", then should find the virtual wifi adapter, then right click it and enable it. After that, you start your cmd with admin privileges, then try:

netsh wlan start hostednetwork

这篇关于启用/禁用 Microsoft 虚拟 WiFi 微型端口的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！