启用 mTLS 时，使用 istio ingress 访问服务会出现 503 错误 [英] Accessing service using istio ingress gives 503 error when mTLS is enabled
本文介绍了启用 mTLS 时，使用 istio ingress 访问服务会出现 503 错误的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我有一个启用了双向 TLS 的 Istio 网格.我的设置如下
I have a mutual TLS enabled Istio mesh. My setup is as follows
- 在 Pod 内运行的服务(服务容器 + 特使)
- 停留在上述服务前面的特使网关.附加到此的 Istio 网关和虚拟服务.它将
/info/路由路由到上述服务. - 使用默认 istio 入口 pod 为入口配置的另一个 Istio 网关.这也有网关+虚拟服务组合.虚拟服务将
/info/路径指向2 中描述的服务
- A service running inside a pod (Service container + envoy)
- An envoy gateway which stays in front of the above service. An Istio Gateway and Virtual Service attached to this. It routes
/info/route to the above service. - Another Istio Gateway configured for ingress using the default istio ingress pod. This also has Gateway+Virtual Service combination. The virtual service directs
/info/path to the service described in 2
我正在尝试使用 curl 命令从入口网关访问服务，例如:
I'm attempting to access the service from the ingress gateway using a curl command such as:
$ curl -X GET http://istio-ingressgateway.istio-system:80/info/ -H "Authorization: Bearer $token" -v
但是我收到了一个 503 not found 错误，如下所示:
But I'm getting a 503 not found error as below:
$ curl -X GET http://istio-ingressgateway.istio-system:80/info/ -H "Authorization: Bearer $token" -v
Note: Unnecessary use of -X or --request, GET is already inferred.
* Trying 10.105.138.94...
* Connected to istio-ingressgateway.istio-system (10.105.138.94) port 80 (#0)
> GET /info/ HTTP/1.1
> Host: istio-ingressgateway.istio-system
> User-Agent: curl/7.47.0
> Accept: */*
> Authorization: Bearer ...
>
< HTTP/1.1 503 Service Unavailable
< content-length: 57
< content-type: text/plain
< date: Sat, 12 Jan 2019 13:30:13 GMT
< server: envoy
<
* Connection #0 to host istio-ingressgateway.istio-system left intact
我检查了 istio-ingressgateway pod 的日志，在那里记录了以下行
I checked the logs of istio-ingressgateway pod and the following line was logged there
[2019-01-13T05:40:16.517Z] "GET /info/ HTTP/1.1" 503 UH 0 19 6 - "10.244.0.5" "curl/7.47.0" "da02fdce-8bb5-90fe-b422-5c74fe28759b" "istio-ingressgateway.istio-system" "-"
如果我登录 istio ingress pod 并尝试使用 curl 发送请求，我会成功收到 200 OK.
If I logged into istio ingress pod and attempt to send the request with curl, I get a successful 200 OK.
# curl hr--gateway-service.default/info/ -H "Authorization: Bearer $token" -v
此外，当在 mTLS 禁用模式下创建网格时，我设法获得了对相同 curl 命令的成功响应.mTLS 设置中没有显示冲突.
Also, I managed to get a successful response for the same curl command when the mesh was created in mTLS disabled mode. There are no conflicts shown in mTLS setup.
这里是我的服务网格的配置详细信息，以防您需要其他信息.
Here are the config details for my service mesh in case you need additional info.
豆荚
$ kubectl get pods --all-namespaces
NAMESPACE NAME READY STATUS RESTARTS AGE
default hr--gateway-deployment-688986c87c-z9nkh 1/1 Running 0 37m
default hr--hr-deployment-596946948d-c89bn 2/2 Running 0 37m
default hr--sts-deployment-694d7cff97-gjwdk 1/1 Running 0 37m
ingress-nginx default-http-backend-6586bc58b6-8qss6 1/1 Running 0 42m
ingress-nginx nginx-ingress-controller-6bd7c597cb-t4rwq 1/1 Running 0 42m
istio-system grafana-85dbf49c94-lfpbr 1/1 Running 0 42m
istio-system istio-citadel-545f49c58b-dq5lq 1/1 Running 0 42m
istio-system istio-cleanup-secrets-bh5ws 0/1 Completed 0 42m
istio-system istio-egressgateway-7d59954f4-qcnxm 1/1 Running 0 42m
istio-system istio-galley-5b6449c48f-72vkb 1/1 Running 0 42m
istio-system istio-grafana-post-install-lwmsf 0/1 Completed 0 42m
istio-system istio-ingressgateway-8455c8c6f7-5khtk 1/1 Running 0 42m
istio-system istio-pilot-58ff4d6647-bct4b 2/2 Running 0 42m
istio-system istio-policy-59685fd869-h7v94 2/2 Running 0 42m
istio-system istio-security-post-install-cqj6k 0/1 Completed 0 42m
istio-system istio-sidecar-injector-75b9866679-qg88s 1/1 Running 0 42m
istio-system istio-statsd-prom-bridge-549d687fd9-bspj2 1/1 Running 0 42m
istio-system istio-telemetry-6ccf9ddb96-hxnwv 2/2 Running 0 42m
istio-system istio-tracing-7596597bd7-m5pk8 1/1 Running 0 42m
istio-system prometheus-6ffc56584f-4cm5v 1/1 Running 0 42m
istio-system servicegraph-5d64b457b4-jttl9 1/1 Running 0 42m
kube-system coredns-78fcdf6894-rxw57 1/1 Running 0 50m
kube-system coredns-78fcdf6894-s4bg2 1/1 Running 0 50m
kube-system etcd-ubuntu 1/1 Running 0 49m
kube-system kube-apiserver-ubuntu 1/1 Running 0 49m
kube-system kube-controller-manager-ubuntu 1/1 Running 0 49m
kube-system kube-flannel-ds-9nvf9 1/1 Running 0 49m
kube-system kube-proxy-r868m 1/1 Running 0 50m
kube-system kube-scheduler-ubuntu 1/1 Running 0 49m
服务
$ kubectl get svc --all-namespaces
NAMESPACE NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
default hr--gateway-service ClusterIP 10.100.238.144 <none> 80/TCP,443/TCP 39m
default hr--hr-service ClusterIP 10.96.193.43 <none> 80/TCP 39m
default hr--sts-service ClusterIP 10.99.54.137 <none> 8080/TCP,8081/TCP,8090/TCP 39m
default kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 52m
ingress-nginx default-http-backend ClusterIP 10.109.166.229 <none> 80/TCP 44m
ingress-nginx ingress-nginx NodePort 10.108.9.180 192.168.60.3 80:31001/TCP,443:32315/TCP 44m
istio-system grafana ClusterIP 10.102.141.231 <none> 3000/TCP 44m
istio-system istio-citadel ClusterIP 10.101.128.187 <none> 8060/TCP,9093/TCP 44m
istio-system istio-egressgateway ClusterIP 10.102.157.204 <none> 80/TCP,443/TCP 44m
istio-system istio-galley ClusterIP 10.96.31.251 <none> 443/TCP,9093/TCP 44m
istio-system istio-ingressgateway LoadBalancer 10.105.138.94 <pending> 80:31380/TCP,443:31390/TCP,31400:31400/TCP,15011:31219/TCP,8060:31482/TCP,853:30034/TCP,15030:31544/TCP,15031:32652/TCP 44m
istio-system istio-pilot ClusterIP 10.100.170.73 <none> 15010/TCP,15011/TCP,8080/TCP,9093/TCP 44m
istio-system istio-policy ClusterIP 10.104.77.184 <none> 9091/TCP,15004/TCP,9093/TCP 44m
istio-system istio-sidecar-injector ClusterIP 10.100.180.152 <none> 443/TCP 44m
istio-system istio-statsd-prom-bridge ClusterIP 10.107.39.50 <none> 9102/TCP,9125/UDP 44m
istio-system istio-telemetry ClusterIP 10.110.55.232 <none> 9091/TCP,15004/TCP,9093/TCP,42422/TCP 44m
istio-system jaeger-agent ClusterIP None <none> 5775/UDP,6831/UDP,6832/UDP 44m
istio-system jaeger-collector ClusterIP 10.102.43.21 <none> 14267/TCP,14268/TCP 44m
istio-system jaeger-query ClusterIP 10.104.182.189 <none> 16686/TCP 44m
istio-system prometheus ClusterIP 10.100.0.70 <none> 9090/TCP 44m
istio-system servicegraph ClusterIP 10.97.65.37 <none> 8088/TCP 44m
istio-system tracing ClusterIP 10.109.87.118 <none> 80/TCP 44m
kube-system kube-dns ClusterIP 10.96.0.10 <none> 53/UDP,53/TCP 52m
第 2 点中描述的网关和虚拟服务
$ kubectl describe gateways.networking.istio.io hr--gateway
Name: hr--gateway
Namespace: default
API Version: networking.istio.io/v1alpha3
Kind: Gateway
Metadata:
...
Spec:
Selector:
App: hr--gateway
Servers:
Hosts:
*
Port:
Name: http2
Number: 80
Protocol: HTTP2
Hosts:
*
Port:
Name: https
Number: 443
Protocol: HTTPS
Tls:
Mode: PASSTHROUGH
$ kubectl describe virtualservices.networking.istio.io hr--gateway
Name: hr--gateway
Namespace: default
Labels: app=hr--gateway
Annotations: <none>
API Version: networking.istio.io/v1alpha3
Kind: VirtualService
Metadata:
...
Spec:
Gateways:
hr--gateway
Hosts:
*
Http:
Match:
Uri:
Prefix: /info/
Rewrite:
Uri: /
Route:
Destination:
Host: hr--hr-service
第 3 点中描述的网关和虚拟服务
$ kubectl describe gateways.networking.istio.io ingress-gateway
Name: ingress-gateway
Namespace: default
Labels: <none>
Annotations: kubectl.kubernetes.io/last-applied-configuration={"apiVersion":"networking.istio.io/v1alpha3","kind":"Gateway","metadata":{"annotations":{},"name":"ingress-gateway","namespace":"default"},"spec":{"sel...
API Version: networking.istio.io/v1alpha3
Kind: Gateway
Metadata:
...
Spec:
Selector:
Istio: ingressgateway
Servers:
Hosts:
*
Port:
Name: http2
Number: 80
Protocol: HTTP2
$ kubectl describe virtualservices.networking.istio.io hr--gateway-ingress-vs
Name: hr--gateway-ingress-vs
Namespace: default
Labels: app=hr--gateway
API Version: networking.istio.io/v1alpha3
Kind: VirtualService
Metadata:
Spec:
Gateways:
ingress-gateway
Hosts:
*
Http:
Match:
Uri:
Prefix: /info/
Route:
Destination:
Host: hr--gateway-service
Events: <none>
推荐答案
问题大概如下:istio-ingressgateway向hr--gateway-service发起mTLS在端口 80 上，但 hr--gateway-service 需要纯 HTTP 连接.
The problem is probably as follows: istio-ingressgateway initiates mTLS to hr--gateway-service on port 80, but hr--gateway-service expects plain HTTP connections.
有多种解决方案:
- 定义 DestinationRule 以指示客户端在调用 hr--gateway-service 时禁用 mTLS
- Define a DestinationRule to instruct clients to disable mTLS on calls to hr--gateway-service
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
name: hr--gateway-service-disable-mtls
spec:
host: hr--gateway-service.default.svc.cluster.local
trafficPolicy:
tls:
mode: DISABLE
- 指示 hr-gateway-service 接受 mTLS 连接.为此，请在端口上配置 服务器 TLS 选项80 是
MUTUAL并使用 Istio 证书和私钥.指定serverCertificate、caCertificates和privateKey为/etc/certs/cert-chain.pem、分别为/etc/certs/root-cert.pem、/etc/certs/key.pem.
- Instruct hr-gateway-service to accept mTLS connections. For that, configure the server TLS options on port 80 to be
MUTUALand to use Istio certificates and the private key. SpecifyserverCertificate,caCertificatesandprivateKeyto be/etc/certs/cert-chain.pem,/etc/certs/root-cert.pem,/etc/certs/key.pem, respectively.
这篇关于启用 mTLS 时，使用 istio ingress 访问服务会出现 503 错误的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
