Kubernetes 使用 flannel 创建容器陷入“ContainerCreating"状态 [英] Kubernetes' container creation with flannel gets stuck in "ContainerCreating"-state

问题描述

背景

我按照

问题

为什么容器创建没有按预期工作，这可能是什么根本原因?最重要的是:我该如何解决这个问题?

编辑

总结我的回答如下，原因如下:

• Docker 使用 cgroups 而不是 systemd
• 我没有正确配置iptables
• 我使用了错误的 kubeadm init，因为 flannels 标准-yaml 要求 --pod-network-cidr 为 10.244.0.0/16

解决方案

因为回答这个问题花了我很多时间，所以我想分享一下是什么让我摆脱了这个问题.可能有一些不必要的代码，但如果我或其他人必须重做所有步骤，我也希望将这些代码放在一个地方.

首先，一切都始于 Docker...

我发现这大概都是从我安装 Docker 的方式开始的.按照链接的在线说明，我使用 sudo apt-get install docker.io 来安装 Docker 并通过执行 cgroups 将其与 cgroups 一起使用代码>sudo usermod -aG docker $USER.

好吧，看看 Kubernetes 的官方说明，这是一个错误:systemd 是推荐的方法！

所以我按照

在站点注释中:这也解决了 /run/flannel/subnet.env: no such file or directory - 在描述未创建的 coredns 时我在这些步骤之前遇到的错误.

Context

I installed Docker following this instruction on my Ubuntu 18.04 LTS (Server) and later on Kubernetes followed via kubeadm. After initializing (kubeadm init --pod-network-cidr=10.10.10.10/24) and joining a second node (I got a two node cluster for the start) I cannot get my coredns as well as the later applied Web UI (Dashboard) to actually go into status Running.

As pod network I tried both, Flannel (kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/2140ac876ef134e0ed5af15c65e414cf26827915/Documentation/kube-flannel.yml) and Weave Net - Nothing changed. It still shows status ContainerCreating, even after hours of waiting:

Question

Why doesn't the container creation work as expected and what might be the root cause for this? And most importantly: How do I solve this?

Edit

Summing up my answer below, here are the reasons why:

• Docker used cgroups instead of systemd
• I did not configure iptables correctly
• I used a wrong kubeadm init since flannels standard-yaml requires --pod-network-cidr to be 10.244.0.0/16

解决方案

Since answering this questions took me a lot of time, I wanted to share what got me out of this. There might be some more code than necessary, but I also want this to be in one place if I or someone else has to redo all steps.

First it all started with Docker...

I figured out that it presumably all started with the way I installed Docker. Following the linked online-instructions I used sudo apt-get install docker.io in order to install Docker and used it with cgroups by doing sudo usermod -aG docker $USER.

Well, taking a look at the official instructions from Kubernetes this was a mistake: systemd is the recommended way to go!

So I completly purged all I ever did with docker by following these great instructions from Mayur Bhandare:

sudo apt-get purge -y docker-engine docker docker.io docker-ce  
sudo apt-get autoremove -y --purge docker-engine docker docker.io docker-ce  
sudo rm -rf /var/lib/docker /etc/docker
sudo rm /etc/apparmor.d/docker
sudo groupdel docker
sudo rm -rf /var/run/docker.sock

# Reboot to be sure

Afterwards I installed reinstalled the official way (keep in mind that this might change in the future):

# Install Docker CE
## Set up the repository:
### Install packages to allow apt to use a repository over HTTPS
apt-get update && apt-get install -y 
  apt-transport-https ca-certificates curl software-properties-common gnupg2

### Add Docker’s official GPG key
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add -

### Add Docker apt repository.
add-apt-repository 
  "deb [arch=amd64] https://download.docker.com/linux/ubuntu 
  $(lsb_release -cs) 
  stable"

## Install Docker CE.
apt-get update && apt-get install -y 
  containerd.io=1.2.10-3 
  docker-ce=5:19.03.4~3-0~ubuntu-$(lsb_release -cs) 
  docker-ce-cli=5:19.03.4~3-0~ubuntu-$(lsb_release -cs)

# Setup daemon.
cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "log-driver": "json-file",
  "log-opts": {
    "max-size": "100m"
  },
  "storage-driver": "overlay2"
}
EOF

mkdir -p /etc/systemd/system/docker.service.d

# Restart docker.
systemctl daemon-reload
systemctl restart docker

Note that this explicitly uses systemd!

... and then it went on with Flannel...

Above I wrote my sudo kubeadm init was done with --pod-network-cidr=10.10.10.10/24 since the latter was the IP of my master. Well, as pointed out here not using the official recommended --pod-network-cidr=10.244.0.0/16 results in an error for example using kubectl proxy or the container-creation when using the provided kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/2140ac876ef134e0ed5af15c65e414cf26827915/Documentation/kube-flannel.yml. This is due to the fact that 10.244.0.0/16 is hard-linked in the .yaml and, hence, mandatory - Or you just change it in the .yaml.

In order to get rid of the false configuration I did a full reset. This can be achieved using sudo kubeadm reset and by deleting the config with sudo rm -r ~/.kube/config. Anyhow, since I screwed it so much, I did a full reset by uninstalling and reinstalling kubeadm and making sure it did use iptables this time (which I also forgot to do before...).

Here is a nice link how to fully uninstall all kubeadm-parts.

kubeadm reset
sudo apt-get purge kubeadm kubectl kubelet kubernetes-cni kube*   
sudo apt-get autoremove  
sudo rm -rf ~/.kube

For the sake of completeness, here is the reinstall as well:

# ensure legacy binaries are installed
sudo apt-get install -y iptables arptables ebtables

# switch to legacy versions
sudo update-alternatives --set iptables /usr/sbin/iptables-legacy
sudo update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy
sudo update-alternatives --set arptables /usr/sbin/arptables-legacy
sudo update-alternatives --set ebtables /usr/sbin/ebtables-legacy

# Install Kubernetes with kubeadm
sudo apt-get update && sudo apt-get install -y apt-transport-https curl
curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | sudo apt-key add -
cat <<EOF | sudo tee /etc/apt/sources.list.d/kubernetes.list
deb https://apt.kubernetes.io/ kubernetes-xenial main
EOF
sudo apt-get update
sudo apt-get install -y kubelet kubeadm kubectl
sudo apt-mark hold kubelet kubeadm kubectl

#reboot

... and finally it worked!

After the clean reinstallation I did the following:

# Initialize with correct cidr
sudo kubeadm init --pod-network-cidr=10.244.0.0/16
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/2140ac876ef134e0ed5af15c65e414cf26827915/Documentation/kube-flannel.yml

And then be astouned by the result:

kubectl get pods --all-namespaces

On a site note: This also resolved the /run/flannel/subnet.env: no such file or directory-error I encountered prior to these steps when describing the uncreated coredns.

这篇关于Kubernetes 使用 flannel 创建容器陷入“ContainerCreating"状态的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！