在开始时避免模糊视频结束(即使在使用 setPreferredVideoStabilizationMode:AVCaptureVideoStabilizationModeAuto 之后)? [英] Avoiding blurriness at start & end of video (even after using setPreferredVideoStabilizationMode:AVCaptureVideoStabilizationModeAuto)?

问题描述

我们在使用 setPreferredVideoStabilizationMode:AVCaptureVideoStabilizationModeAuto 时在 iOS 上捕获视频，但是视频有时在开始和结束时仍然很模糊(虽然中间很好)，这是非常有问题的，因为我们抓取第一帧作为静止图像(以便在不切换相机模式的情况下启用视频和照片功能).

We capture video on iOS while using setPreferredVideoStabilizationMode:AVCaptureVideoStabilizationModeAuto, but the video still sometimes comes out blurry at the start and at the end (fine in the middle, though), which is very problematic because we grab the first frame as a still image (in order to enable video & photo capabilities without switching camera modes).

将设备平放在桌子上可以消除所有模糊，因此整个视频始终清晰.这表明它与视频稳定有关，但是否还有其他属性需要设置?

Placing the device flat on a desk removes all blurriness, so the whole video is sharp throughout. This suggests it has something to do with video stabilization, but is there another property to set?

锁定对焦模式重要吗?

还有其他故障排除技巧吗?

Any other troubleshooting tips?

这是来自 PBJVision 的视频捕获功能，我们使用:>

Here is the video capture function from PBJVision, which we use:

- (void)startVideoCapture
{
    if (![self _canSessionCaptureWithOutput:_currentOutput] || _cameraMode != PBJCameraModeVideo) {
        [self _failVideoCaptureWithErrorCode:PBJVisionErrorSessionFailed];
        DLog(@"session is not setup properly for capture");
        return;
    }

    DLog(@"starting video capture");

    [self _enqueueBlockOnCaptureVideoQueue:^{

        if (_flags.recording || _flags.paused)
            return;

        NSString *guid = [[NSUUID new] UUIDString];
        NSString *outputFile = [NSString stringWithFormat:@"video_%@.mp4", guid];

        if ([_delegate respondsToSelector:@selector(vision:willStartVideoCaptureToFile:)]) {
            outputFile = [_delegate vision:self willStartVideoCaptureToFile:outputFile];

            if (!outputFile) {
                [self _failVideoCaptureWithErrorCode:PBJVisionErrorBadOutputFile];
                return;
            }
        }

        NSString *outputDirectory = (_captureDirectory == nil ? NSTemporaryDirectory() : _captureDirectory);
        NSString *outputPath = [outputDirectory stringByAppendingPathComponent:outputFile];
        NSURL *outputURL = [NSURL fileURLWithPath:outputPath];
        if ([[NSFileManager defaultManager] fileExistsAtPath:outputPath]) {
            NSError *error = nil;
            if (![[NSFileManager defaultManager] removeItemAtPath:outputPath error:&error]) {
                [self _failVideoCaptureWithErrorCode:PBJVisionErrorOutputFileExists];

                DLog(@"could not setup an output file (file exists)");
                return;
            }
        }

        if (!outputPath || [outputPath length] == 0) {
            [self _failVideoCaptureWithErrorCode:PBJVisionErrorBadOutputFile];

            DLog(@"could not setup an output file");
            return;
        }

        if (_mediaWriter) {
            _mediaWriter.delegate = nil;
            _mediaWriter = nil;
        }
        _mediaWriter = [[PBJMediaWriter alloc] initWithOutputURL:outputURL];
        _mediaWriter.delegate = self;

        AVCaptureConnection *videoConnection = [_captureOutputVideo connectionWithMediaType:AVMediaTypeVideo];
        [self _setOrientationForConnection:videoConnection];

        _startTimestamp = CMClockGetTime(CMClockGetHostTimeClock());
        _timeOffset = kCMTimeInvalid;

        _flags.recording = YES;
        _flags.paused = NO;
        _flags.interrupted = NO;
        _flags.videoWritten = NO;

        _captureThumbnailTimes = [NSMutableSet set];
        _captureThumbnailFrames = [NSMutableSet set];

        if (_flags.thumbnailEnabled && _flags.defaultVideoThumbnails) {
            [self captureVideoThumbnailAtFrame:0];
        }

        [self _enqueueBlockOnMainQueue:^{                
            if ([_delegate respondsToSelector:@selector(visionDidStartVideoCapture:)])
                [_delegate visionDidStartVideoCapture:self];
        }];
    }];
}

此代码配置 PBJVision 并开始视频捕获:

This code configures PBJVision and starts video capture:

private func initPBJVision() {
    // Configure PBJVision
    pbj.delegate = self
    pbj.cameraMode = .Video
    pbj.cameraOrientation = .Portrait
    pbj.focusMode = .AutoFocus
    pbj.outputFormat = .Preset
    pbj.cameraDevice = .Back
    pbj.thumbnailEnabled = false

    // Log status
    print("Configured PBJVision")

    pbj.startVideoCapture()
}

一旦 PBJ 准备好预览，我们就会让相机聚焦在屏幕的中点.

Once PBJ is ready with its preview, we make the camera focus on the midpoint of the screen.

// Called when PBJVision preview begins
func visionSessionDidStartPreview(vision: PBJVision) {
    // Focus screen at midpoint
    let focus_x = CGFloat(0.5)
    let focus_y = CGFloat(0.5)
}

推荐答案

我不知道 PBJVision 框架，但你可以查看 adjustingFocus AVCaptureDevice 提取您需要的图片之前.

I do not know about the PBJVision framework, but you could check the adjustingFocus of the AVCaptureDevice before extracting the picture you need.

显然，您可以使用 PBJVision isAdjustingFocus 方法来检查设备的对焦状态.

Apparently, you can check the focusing status of the device by using PBJVision isAdjustingFocus method.

这篇关于在开始时避免模糊视频结束(即使在使用 setPreferredVideoStabilizationMode:AVCaptureVideoStabilizationModeAuto 之后)?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！