python to arduino 串行读取 &写 [英] python to arduino serial read & write

问题描述

我正在尝试在一些 python 代码和 arduino 代码之间来回乒乓"信息.我想定期向 arduino 代码发送两个设定点(例如在分钟内)，在 arduino &更新变量然后定期将状态信息从arduino发送回python(例如:30秒).最终，python 将从 mySQL 数据库(后来的开发)发送和提取信息.

I'm trying to "ping pong" info back and forth between some python code and arduino code. I want to send two setpoints to the arduino code periodically (for instance on the minute), read them on arduino & update variables then send status info from arduino back to python periodically (such as on the :30 second). Eventually python will be sending and pulling info from a mySQL db (later dev).

现在我无法让信息可靠地来回反弹.我在搜索中没有找到任何与此相关的东西，而且我尝试修改的所有内容都不起作用.我最接近的是这个(它实际上并没有在发送和接收之间来回切换):

Right now I can't get the info to bounce back and forth reliably. I haven't found anything close to this in the searches and everything I've tried to modify isn't working. Closest I have is this (and it doesn't actually switch back and forth between send and receive):

Python

#!/usr/bin/python
import serial
import syslog
import time

#The following line is for serial over GPIO
port = '/dev/ttyS0'


ard = serial.Serial(port,9600,timeout=5)

i = 0

while (i < 4):
    # Serial write section

    setTempCar1 = 63
    setTempCar2 = 37
    ard.flush()
    setTemp1 = str(setTempCar1)
    setTemp2 = str(setTempCar2)
    print ("Python value sent: ")
    print (setTemp1)
    ard.write(setTemp1)
    time.sleep(4)

    # Serial read section
    msg = ard.readline()
    print ("Message from arduino: ")
    print (msg)
    i = i + 1
else:
    print "Exiting"
exit()

阿杜诺:

// Serial test script

int setPoint = 55;
String readString;

void setup()
{

  Serial.begin(9600);  // initialize serial communications at 9600 bps

}

void loop()
{
  while(!Serial.available()) {}
  // serial read section
  while (Serial.available())
  {
    if (Serial.available() >0)
    {
      char c = Serial.read();  //gets one byte from serial buffer
      readString += c; //makes the string readString
    }
  }

  if (readString.length() >0)
  {
    Serial.print("Arduino received: ");  
    Serial.println(readString); //see what was received
  }

  delay(500);

  // serial write section

  char ard_sends = '1';
  Serial.print("Arduino sends: ");
  Serial.println(ard_sends);
  Serial.print("
");
  Serial.flush();
}

我最终得到的只是重复的相同值(不是实际发送的值，不确定是字符串还是字节问题)并且没有返回到 python 脚本.非常感谢任何帮助或想法.谢谢.

All I end up getting is the same values repeated (not what was actually sent, not sure if its a string or byte issue) and nothing back to the python script. Any help or ideas are greatly appreciated. Thanks.

将代码修改为我当前正在运行的代码，如下所示.Arduino 正在接收 minicom 验证的良好和串行通信.但是python脚本仍然在来自arduino的消息:"之后打印一个空行.

Modified code to what I'm currently running as suggested below. Arduino is receiving fine and serial communication verified by minicom. But python script still prints a blank line after "Message from arduino: ".

推荐答案

你不应该在 Python 中在读写之间关闭串口.当 Arduino 响应时，端口可能仍然关闭，在这种情况下，数据将丢失.

You shouldn't be closing the serial port in Python between writing and reading. There is a chance that the port is still closed when the Arduino responds, in which case the data will be lost.

while running:  
    # Serial write section
    setTempCar1 = 63
    setTempCar2 = 37
    setTemp1 = str(setTempCar1)
    setTemp2 = str(setTempCar2)
    print ("Python value sent: ")
    print (setTemp1)
    ard.write(setTemp1)
    time.sleep(6) # with the port open, the response will be buffered 
                  # so wait a bit longer for response here

    # Serial read section
    msg = ard.read(ard.inWaiting()) # read everything in the input buffer
    print ("Message from arduino: ")
    print (msg)

Python Serial.read 函数默认只返回一个字节，所以你需要要么循环调用它，要么等待数据传输完毕再读取整个缓冲区.

The Python Serial.read function only returns a single byte by default, so you need to either call it in a loop or wait for the data to be transmitted and then read the whole buffer.

在 Arduino 方面，您应该考虑在没有数据可用时在您的 loop 函数中会发生什么.

On the Arduino side, you should consider what happens in your loop function when no data is available.

void loop()
{
  // serial read section
  while (Serial.available()) // this will be skipped if no data present, leading to
                             // the code sitting in the delay function below
  {
    delay(30);  //delay to allow buffer to fill 
    if (Serial.available() >0)
    {
      char c = Serial.read();  //gets one byte from serial buffer
      readString += c; //makes the string readString
    }
  }

相反，在 loop 函数开始处等待，直到数据到达:

Instead, wait at the start of the loop function until data arrives:

void loop()
{
  while (!Serial.available()) {} // wait for data to arrive
  // serial read section
  while (Serial.available())
  {
    // continue as before

编辑 2

这是我通过 Python 与您的 Arduino 应用程序交互时得到的结果:

Here's what I get when interfacing with your Arduino app from Python:

>>> import serial
>>> s = serial.Serial('/dev/tty.usbmodem1411', 9600, timeout=5)
>>> s.write('2')
1
>>> s.readline()
'Arduino received: 2
'

所以这似乎工作正常.

在测试您的 Python 脚本时，问题似乎是当您打开串行端口时 Arduino 会重置(至少我的 Uno 会重置)，因此您需要等待几秒钟才能启动.您也只读取了响应的一行，所以我也在下面的代码中修复了这个问题:

In testing your Python script, it seems the problem is that the Arduino resets when you open the serial port (at least my Uno does), so you need to wait a few seconds for it to start up. You are also only reading a single line for the response, so I've fixed that in the code below also:

#!/usr/bin/python
import serial
import syslog
import time

#The following line is for serial over GPIO
port = '/dev/tty.usbmodem1411' # note I'm using Mac OS-X


ard = serial.Serial(port,9600,timeout=5)
time.sleep(2) # wait for Arduino

i = 0

while (i < 4):
    # Serial write section

    setTempCar1 = 63
    setTempCar2 = 37
    ard.flush()
    setTemp1 = str(setTempCar1)
    setTemp2 = str(setTempCar2)
    print ("Python value sent: ")
    print (setTemp1)
    ard.write(setTemp1)
    time.sleep(1) # I shortened this to match the new value in your Arduino code

    # Serial read section
    msg = ard.read(ard.inWaiting()) # read all characters in buffer
    print ("Message from arduino: ")
    print (msg)
    i = i + 1
else:
    print "Exiting"
exit()

现在是上面的输出:

$ python ardser.py
Python value sent:
63
Message from arduino:
Arduino received: 63
Arduino sends: 1


Python value sent:
63
Message from arduino:
Arduino received: 63
Arduino sends: 1


Python value sent:
63
Message from arduino:
Arduino received: 63
Arduino sends: 1


Python value sent:
63
Message from arduino:
Arduino received: 63
Arduino sends: 1


Exiting

这篇关于python to arduino 串行读取 &写的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！