如何以编程方式创建和读​​取WEP / EAP无线网络配置,Android的? [英] How to programatically create and read WEP/EAP WiFi configurations in Android?

查看:208
本文介绍了如何以编程方式创建和读​​取WEP / EAP无线网络配置,Android的?的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

如何以编程方式创建并在Android中读 WEP / EAP无线网络配置

How to programatically create and read WEP/EAP WiFi configurations in Android?

我已经看到了一些人挣扎在此的各种论坛和所有在整个社会来说是非常的问题。我知道这是不是直线前进(尤其是EAP)来计算,因为当我想实现同样的我也挣扎着相当lot.Well中,code分析和搜索互联网上的各种实现所有的辛勤工作完成与我终于能获得了这幅目标。全部归功于开源项目及其开发者的数量。

I have seen a number of people struggling on this very question on various forums and all across the community. I know this is not that straight forward(especially EAP) to figure out because When I wanted to acheive the same I too struggled quite a lot.Well, all the hard work of code analysis and searching various implementations on the internet done with I was finally able to acheive the goal. All the credit goes to number of open source projects and their developers.

我想与大家分享这方面的知识与所有的,既然有这么鼓励这一点:这也是完全没有提出和回答你自己的问题,只要pretend你在危险边缘:短语它的问题的形式

I would like to share this knowledge with all, Since SO encourages this: "It's also perfectly fine to ask and answer your own question, as long as you pretend you're on Jeopardy: phrase it in the form of a question."

<一个href="http://stackoverflow.com/questions/4374862/how-to-programatically-create-and-read-wep-eap-wifi-configurations-in-android/4374934#4374934">Part 1: 创建一个WEP无线网络的配置编程

<一个href="http://stackoverflow.com/questions/4374862/how-to-programatically-create-and-read-wep-eap-wifi-configurations-in-android/4374934#4374934">Part 2: 读一个WEP无线网络的配置编程

<一个href="http://stackoverflow.com/questions/4374862/how-to-programatically-create-and-read-wep-eap-wifi-configurations-in-android/4374934#4374934">Part 3: 看了EAP的WiFi配置编程

<一个href="http://stackoverflow.com/questions/4374862/how-to-programatically-create-and-read-wep-eap-wifi-configurations-in-android/4375874#4375874">Part 4: 保存EAP无线网络配置编程

推荐答案

第1部分:创建一个WEP无线网络的配置编程

Part 1: Creating a WEP WiFi configuration programatically

这是pretty的多少直接的,<一个href="http://developer.android.com/reference/android/net/wifi/WifiConfiguration.html">WifiConfiguration暴露来创建相同的接口。下面是示例code:

This is pretty much straightforward, WifiConfiguration exposes the interface to create the same. Here is the sample code:

void saveWepConfig()
{
    WifiManager wifi = (WifiManager) getSystemService(Context.WIFI_SERVICE);
    WifiConfiguration wc = new WifiConfiguration(); 
    wc.SSID = "\"SSID_NAME\""; //IMP! This should be in Quotes!!
    wc.hiddenSSID = true;
    wc.status = WifiConfiguration.Status.DISABLED;     
    wc.priority = 40;
    wc.allowedKeyManagement.set(WifiConfiguration.KeyMgmt.NONE);
    wc.allowedProtocols.set(WifiConfiguration.Protocol.RSN); 
    wc.allowedProtocols.set(WifiConfiguration.Protocol.WPA);
    wc.allowedAuthAlgorithms.set(WifiConfiguration.AuthAlgorithm.OPEN);
    wc.allowedAuthAlgorithms.set(WifiConfiguration.AuthAlgorithm.SHARED);
    wc.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.CCMP);
    wc.allowedPairwiseCiphers.set(WifiConfiguration.PairwiseCipher.TKIP);
    wc.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP40);
    wc.allowedGroupCiphers.set(WifiConfiguration.GroupCipher.WEP104);

    wc.wepKeys[0] = "\"aaabbb1234\""; //This is the WEP Password
    wc.wepTxKeyIndex = 0;

    WifiManager  wifiManag = (WifiManager) this.getSystemService(WIFI_SERVICE);
    boolean res1 = wifiManag.setWifiEnabled(true);
    int res = wifi.addNetwork(wc);
    Log.d("WifiPreference", "add Network returned " + res );
    boolean es = wifi.saveConfiguration();
    Log.d("WifiPreference", "saveConfiguration returned " + es );
    boolean b = wifi.enableNetwork(res, true);   
    Log.d("WifiPreference", "enableNetwork returned " + b );  

}

随着需要在AndroidManifest.xml中的权限

Following the permissions needed in AndroidManifest.xml

    <uses-permission android:name="android.permission.ACCESS_WIFI_STATE">
    </uses-permission>
    <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE">
    </uses-permission>
    <uses-permission android:name="android.permission.CHANGE_WIFI_STATE">
    </uses-permission>

第2部分:阅读一个WEP无线网络的配置编程
再次Straighforward。下面是示例code:

Part 2: Read a WEP WiFi configuration programatically
Straighforward again. Here is the sample code:

    void readWepConfig()
    { 
        WifiManager wifi = (WifiManager) getSystemService(Context.WIFI_SERVICE); 
        List<WifiConfiguration> item = wifi.getConfiguredNetworks();
        int i = item.size();
        Log.d("WifiPreference", "NO OF CONFIG " + i );
        Iterator<WifiConfiguration> iter =  item.iterator();
        WifiConfiguration config = item.get(0);
        Log.d("WifiPreference", "SSID" + config.SSID);
        Log.d("WifiPreference", "PASSWORD" + config.preSharedKey);
        Log.d("WifiPreference", "ALLOWED ALGORITHMS");
        Log.d("WifiPreference", "LEAP" + config.allowedAuthAlgorithms.get(AuthAlgorithm.LEAP));
        Log.d("WifiPreference", "OPEN" + config.allowedAuthAlgorithms.get(AuthAlgorithm.OPEN));
        Log.d("WifiPreference", "SHARED" + config.allowedAuthAlgorithms.get(AuthAlgorithm.SHARED));
        Log.d("WifiPreference", "GROUP CIPHERS");
        Log.d("WifiPreference", "CCMP" + config.allowedGroupCiphers.get(GroupCipher.CCMP));
        Log.d("WifiPreference", "TKIP" + config.allowedGroupCiphers.get(GroupCipher.TKIP));
        Log.d("WifiPreference", "WEP104" + config.allowedGroupCiphers.get(GroupCipher.WEP104));
        Log.d("WifiPreference", "WEP40" + config.allowedGroupCiphers.get(GroupCipher.WEP40));
        Log.d("WifiPreference", "KEYMGMT");
        Log.d("WifiPreference", "IEEE8021X" + config.allowedKeyManagement.get(KeyMgmt.IEEE8021X));
        Log.d("WifiPreference", "NONE" + config.allowedKeyManagement.get(KeyMgmt.NONE));
        Log.d("WifiPreference", "WPA_EAP" + config.allowedKeyManagement.get(KeyMgmt.WPA_EAP));
        Log.d("WifiPreference", "WPA_PSK" + config.allowedKeyManagement.get(KeyMgmt.WPA_PSK));
        Log.d("WifiPreference", "PairWiseCipher");
        Log.d("WifiPreference", "CCMP" + config.allowedPairwiseCiphers.get(PairwiseCipher.CCMP));
        Log.d("WifiPreference", "NONE" + config.allowedPairwiseCiphers.get(PairwiseCipher.NONE));
        Log.d("WifiPreference", "TKIP" + config.allowedPairwiseCiphers.get(PairwiseCipher.TKIP));
        Log.d("WifiPreference", "Protocols");
        Log.d("WifiPreference", "RSN" + config.allowedProtocols.get(Protocol.RSN));
        Log.d("WifiPreference", "WPA" + config.allowedProtocols.get(Protocol.WPA));
        Log.d("WifiPreference", "WEP Key Strings");
        String[] wepKeys = config.wepKeys;
        Log.d("WifiPreference", "WEP KEY 0" + wepKeys[0]);
        Log.d("WifiPreference", "WEP KEY 1" + wepKeys[1]);
        Log.d("WifiPreference", "WEP KEY 2" + wepKeys[2]);
        Log.d("WifiPreference", "WEP KEY 3" + wepKeys[3]);
    }

第3部分:读一EAP的WiFi配置编程
现在,这是非常棘手。你可以找到code它通过香草Android的UI在<一个节省了EAP无线网络配置href="http://hi-android.info/src/com/android/settings/wifi/WifiDialog.java.html">WifiDialog.java.那么很容易,我们可以使用相同的code在我们的应用程序,哦,不!如果你碰巧试试这个,你会得到错误说找不到符号 EAP client_cert这等。有一点详细的调查告诉我们<一个href="http://www.kiwidoc.com/java/l/p/android/android/5/p/android.net.wifi/c/WifiConfiguration">EnterpriseField<$c$c>is私人在 WiFiConfiguration 类和所有我们无法找到该符号的类型 EnterpriseField 的。好了,我们已经打了一个障碍,我们需要这些领域的读取/保存EAP配置,但我们没有编程访问他们!

Part 3: Read a EAP WiFi Configuration programatically
Now this is tricky. You can find the code which saves a EAP WiFi configuration through the vanilla Android UI in WifiDialog.java. Well easy enough We can use the same code in our Application, Well NO! If you happen to try this you will get errors saying cannot find the symbols eap, phase, client_cert and so on. A little detailed investigation tells us EnterpriseFieldis private inside WiFiConfiguration class and all the symbols we cannot find are of the type EnterpriseField. Well we've hit a roadblock, We need these fields for reading/saving a EAP config but we don't have programmatic access to them!

Java反射API 救援 好吧,我不是Java专家,所以我不会越来越到的反射API细节,比如,你可以谷歌教程或获得更多的信息的here 。 为了保持简短而亲切,反射API允许你检查类,接口,字段和方法在运行时,不知道类,方法等的名称在编译时。也可以实例化新对象,调用方法和获取/使用reflection.And,更重要的设置字段值的反射可以帮助你访问私有数据成员在类中嗯,这就是我们需要做的不是吗? :)

Java Reflection API to the rescue Well I am not a Java expert so I wont be getting in to details of Reflection API as such and you can google for tutorials or get more information here. To keep it Short and Sweet, Reflection API allows you to inspect classes, interfaces, fields and methods at runtime, without knowing the names of the classes, methods etc. at compile time. It is also possible to instantiate new objects, invoke methods and get/set field values using reflection.And, Importantly Reflection can help you access private data members inside a class Well this is what we need don't we? :)

让我们检查code比如现在它展示了如何使用反射API来读取一个EAP无线网络配置。作为奖励的片段将记录在配置到一个文件并将其保存在SD卡.... pretty的光滑..eh;)反射API概述一点点,我相信抓code以下是容易的。

Let's check the code example now which shows how to read a EAP WiFi configuration using Reflection Api. As a bonus the snippet will log the config to a file and save it on the SD Card....pretty slick ..eh ;) A little bit of overview of Reflection Api and I am sure grasping the code below is easy.

    private static final String INT_PRIVATE_KEY = "private_key";
    private static final String INT_PHASE2 = "phase2";
    private static final String INT_PASSWORD = "password";
    private static final String INT_IDENTITY = "identity";
    private static final String INT_EAP = "eap";
    private static final String INT_CLIENT_CERT = "client_cert";
    private static final String INT_CA_CERT = "ca_cert";
    private static final String INT_ANONYMOUS_IDENTITY = "anonymous_identity";
    final String INT_ENTERPRISEFIELD_NAME = "android.net.wifi.WifiConfiguration$EnterpriseField";

这是在code调用 readEapConfig()函数之前创建到SD卡上的日志文件。

This is the code to create a logfile on to SD card before calling the readEapConfig() function.

        BufferedWriter out = null;
        try 
        {
            File root = Environment.getExternalStorageDirectory();
            Toast toast = Toast.makeText(this, "SD CARD mounted and writable? " + root.canWrite(), 5000);
            toast.show();
            if (root.canWrite())
            {
                File gpxfile = new File(root, "ReadConfigLog.txt");
                FileWriter gpxwriter = new FileWriter(gpxfile);
                out = new BufferedWriter(gpxwriter);
                out.write("Hello world");
                //out.close();
            }
        } catch (IOException e) 
        {
            Toast toast = Toast.makeText(this, "Problem reading SD CARD", 3000);
            Toast toast2 = Toast.makeText(this, "Please take logs using Logcat", 5000);
            Log.e("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "Could not write file " + e.getMessage());
        }

现在的 readEapConfig()函数本身:

    void readEapConfig(BufferedWriter out)
    {
        /*Get the WifiService */        
        WifiManager wifi = (WifiManager)getSystemService(WIFI_SERVICE);
        /*Get All WIfi configurations*/
        List<WifiConfiguration> configList = wifi.getConfiguredNetworks();
        /*Now we need to search appropriate configuration i.e. with name SSID_Name*/
        for(int i = 0;i<configList.size();i++)
        {
            if(configList.get(i).SSID.contentEquals("\"SSID_NAME\""))
            {
                /*We found the appropriate config now read all config details*/
                Iterator<WifiConfiguration> iter =  configList.iterator();
                WifiConfiguration config = configList.get(i);

                /*I dont think these fields have anything to do with EAP config but still will
                 * print these to be on safe side*/
                try {
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[SSID]" + config.SSID);
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[SSID]" + config.SSID);
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[BSSID]" + config.BSSID);
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" +"[BSSID]" + config.BSSID);
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[HIDDEN SSID]" + config.hiddenSSID);
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[HIDDEN SSID]" + config.hiddenSSID);
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[PASSWORD]" + config.preSharedKey);
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>"+ "[PASSWORD]" + config.preSharedKey);
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[ALLOWED ALGORITHMS]");
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>"+ "[ALLOWED ALGORITHMS]");
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[LEAP]" + config.allowedAuthAlgorithms.get(AuthAlgorithm.LEAP));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[LEAP]" + config.allowedAuthAlgorithms.get(AuthAlgorithm.LEAP));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[OPEN]" + config.allowedAuthAlgorithms.get(AuthAlgorithm.OPEN));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[OPEN]" + config.allowedAuthAlgorithms.get(AuthAlgorithm.OPEN));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[SHARED]" + config.allowedAuthAlgorithms.get(AuthAlgorithm.SHARED));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[SHARED]" + config.allowedAuthAlgorithms.get(AuthAlgorithm.SHARED));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[GROUP CIPHERS]");
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[GROUP CIPHERS]");
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[CCMP]" + config.allowedGroupCiphers.get(GroupCipher.CCMP));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[CCMP]" + config.allowedGroupCiphers.get(GroupCipher.CCMP));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" , "[TKIP]" + config.allowedGroupCiphers.get(GroupCipher.TKIP));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>"+ "[TKIP]" + config.allowedGroupCiphers.get(GroupCipher.TKIP));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WEP104]" + config.allowedGroupCiphers.get(GroupCipher.WEP104));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WEP104]" + config.allowedGroupCiphers.get(GroupCipher.WEP104));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WEP40]" + config.allowedGroupCiphers.get(GroupCipher.WEP40));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WEP40]" + config.allowedGroupCiphers.get(GroupCipher.WEP40));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[KEYMGMT]");
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[KEYMGMT]");
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[IEEE8021X]" + config.allowedKeyManagement.get(KeyMgmt.IEEE8021X));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>"+ "[IEEE8021X]" + config.allowedKeyManagement.get(KeyMgmt.IEEE8021X));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[NONE]" + config.allowedKeyManagement.get(KeyMgmt.NONE));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[NONE]" + config.allowedKeyManagement.get(KeyMgmt.NONE));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WPA_EAP]" + config.allowedKeyManagement.get(KeyMgmt.WPA_EAP));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WPA_EAP]" + config.allowedKeyManagement.get(KeyMgmt.WPA_EAP));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WPA_PSK]" + config.allowedKeyManagement.get(KeyMgmt.WPA_PSK));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WPA_PSK]" + config.allowedKeyManagement.get(KeyMgmt.WPA_PSK));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[PairWiseCipher]");
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[PairWiseCipher]");
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[CCMP]" + config.allowedPairwiseCiphers.get(PairwiseCipher.CCMP));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[CCMP]" + config.allowedPairwiseCiphers.get(PairwiseCipher.CCMP));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[NONE]" + config.allowedPairwiseCiphers.get(PairwiseCipher.NONE));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[NONE]" + config.allowedPairwiseCiphers.get(PairwiseCipher.NONE));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[TKIP]" + config.allowedPairwiseCiphers.get(PairwiseCipher.TKIP));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[TKIP]" + config.allowedPairwiseCiphers.get(PairwiseCipher.TKIP));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[Protocols]");
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[Protocols]");
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[RSN]" + config.allowedProtocols.get(Protocol.RSN));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[RSN]" + config.allowedProtocols.get(Protocol.RSN));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WPA]" + config.allowedProtocols.get(Protocol.WPA));
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WPA]" + config.allowedProtocols.get(Protocol.WPA));
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[PRE_SHARED_KEY]" + config.preSharedKey);
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[PRE_SHARED_KEY]" + config.preSharedKey);
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WEP Key Strings]");
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WEP Key Strings]");
                String[] wepKeys = config.wepKeys;
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WEP KEY 0]" + wepKeys[0]);
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WEP KEY 0]" + wepKeys[0]);
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WEP KEY 1]" + wepKeys[1]);
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WEP KEY 1]" + wepKeys[1]);
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WEP KEY 2]" + wepKeys[2]);
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WEP KEY 2]" + wepKeys[2]);
                Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[WEP KEY 3]" + wepKeys[3]);
                out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[WEP KEY 3]" + wepKeys[3]);

                }
                catch(IOException e) 
                {
                    Toast toast1 = Toast.makeText(this, "Failed to write Logs to ReadConfigLog.txt", 3000);
                    Toast toast2 = Toast.makeText(this, "Please take logs using Logcat", 5000);
                    Log.e("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "Could not write to ReadConfigLog.txt" + e.getMessage());
                }
                /*reflection magic*/
                /*These are the fields we are really interested in*/
                try 
                {
                    // Let the magic start
                    Class[] wcClasses = WifiConfiguration.class.getClasses();
                    // null for overzealous java compiler
                    Class wcEnterpriseField = null;

                    for (Class wcClass : wcClasses)
                        if (wcClass.getName().equals(INT_ENTERPRISEFIELD_NAME)) 
                        {
                            wcEnterpriseField = wcClass;
                            break;
                        }
                    boolean noEnterpriseFieldType = false; 
                    if(wcEnterpriseField == null)
                        noEnterpriseFieldType = true; // Cupcake/Donut access enterprise settings directly

                    Field wcefAnonymousId = null, wcefCaCert = null, wcefClientCert = null, wcefEap = null, wcefIdentity = null, wcefPassword = null, wcefPhase2 = null, wcefPrivateKey = null;
                    Field[] wcefFields = WifiConfiguration.class.getFields();
                    // Dispatching Field vars
                    for (Field wcefField : wcefFields) 
                    {
                        if (wcefField.getName().trim().equals(INT_ANONYMOUS_IDENTITY))
                            wcefAnonymousId = wcefField;
                        else if (wcefField.getName().trim().equals(INT_CA_CERT))
                            wcefCaCert = wcefField;
                        else if (wcefField.getName().trim().equals(INT_CLIENT_CERT))
                            wcefClientCert = wcefField;
                        else if (wcefField.getName().trim().equals(INT_EAP))
                            wcefEap = wcefField;
                        else if (wcefField.getName().trim().equals(INT_IDENTITY))
                            wcefIdentity = wcefField;
                        else if (wcefField.getName().trim().equals(INT_PASSWORD))
                            wcefPassword = wcefField;
                        else if (wcefField.getName().trim().equals(INT_PHASE2))
                            wcefPhase2 = wcefField;
                        else if (wcefField.getName().trim().equals(INT_PRIVATE_KEY))
                            wcefPrivateKey = wcefField;
                    }
                Method wcefValue = null;
                if(!noEnterpriseFieldType)
                {
                for(Method m: wcEnterpriseField.getMethods())
                //System.out.println(m.getName());
                if(m.getName().trim().equals("value")){
                    wcefValue = m;
                    break;
                }
                }

                /*EAP Method*/
                String result = null;
                Object obj = null;
                if(!noEnterpriseFieldType)
                {
                    obj = wcefValue.invoke(wcefEap.get(config), null);
                    String retval = (String)obj;
                    Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[EAP METHOD]" + retval);
                    out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[EAP METHOD]" + retval);
                }
                else
                {
                    obj = wcefEap.get(config);
                    String retval = (String)obj;                        
                }

                /*phase 2*/
                if(!noEnterpriseFieldType)
                {
                    result = (String) wcefValue.invoke(wcefPhase2.get(config), null);
                    Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[EAP PHASE 2 AUTHENTICATION]" + result);
                    out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[EAP PHASE 2 AUTHENTICATION]" + result);
                }
                else
                {
                    result = (String) wcefPhase2.get(config);
                }

                /*Anonymous Identity*/
                if(!noEnterpriseFieldType)
                {
                    result = (String) wcefValue.invoke(wcefAnonymousId.get(config),null);
                    Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[EAP ANONYMOUS IDENTITY]" + result);
                    out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[EAP ANONYMOUS IDENTITY]" + result);
                }
                else
                {
                    result = (String) wcefAnonymousId.get(config);
                }

                /*CA certificate*/
                if(!noEnterpriseFieldType)
                {
                    result = (String) wcefValue.invoke(wcefCaCert.get(config), null);
                    Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[EAP CA CERTIFICATE]" + result);
                    out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[EAP CA CERTIFICATE]" + result);
                }
                else
                {
                    result = (String)wcefCaCert.get(config);

                }

                /*private key*/
                if(!noEnterpriseFieldType)
                {
                    result = (String) wcefValue.invoke(wcefPrivateKey.get(config),null);
                    Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[EAP PRIVATE KEY]" + result);
                    out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[EAP PRIVATE KEY]" + result);
                }
                else
                {
                    result = (String)wcefPrivateKey.get(config);
                }

                /*Identity*/
                if(!noEnterpriseFieldType)
                {
                    result = (String) wcefValue.invoke(wcefIdentity.get(config), null);
                    Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[EAP IDENTITY]" + result);
                    out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[EAP IDENTITY]" + result);
                }
                else
                {
                    result = (String)wcefIdentity.get(config);
                }

                /*Password*/
                if(!noEnterpriseFieldType)
                {
                    result = (String) wcefValue.invoke(wcefPassword.get(config), null);
                    Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[EAP PASSWORD]" + result);
                    out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[EAP PASSWORD]" + result);
                }
                else
                {
                    result = (String)wcefPassword.get(config);
                }

                /*client certificate*/
                if(!noEnterpriseFieldType)
                {
                    result = (String) wcefValue.invoke(wcefClientCert.get(config), null);
                    Log.d("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "[EAP CLIENT CERT]" + result);
                    out.write("<<<<<<<<<<WifiPreference>>>>>>>>>>>>" + "[EAP CLIENT CERT]" + result);
                    Toast toast1 = Toast.makeText(this, "All config data logged to ReadConfigLog.txt", 3000);
                    Toast toast2 = Toast.makeText(this, "Extract ReadConfigLog.txt from SD CARD", 5000);
                }
                else
                {
                    result = (String)wcefClientCert.get(config);
                }

                out.close();

                }
                catch(IOException e) 
                {
                    Toast toast1 = Toast.makeText(this, "Failed to write Logs to ReadConfigLog.txt", 3000);
                    Toast toast2 = Toast.makeText(this, "Please take logs using Logcat", 5000);
                    Log.e("<<<<<<<<<<WifiPreference>>>>>>>>>>>>", "Could not write to ReadConfigLog.txt" + e.getMessage());
                }
                catch(Exception e)
                {
                    e.printStackTrace();
                }

            }
        }
    }

这篇关于如何以编程方式创建和读​​取WEP / EAP无线网络配置,Android的?的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆