Android设备不会亚行列表中显示出来 [英] Android device does not show up in adb list
问题描述
我有一个惠普Slate 21使用USB连接线连接到我的Windows机器。 USB调试设备上启用。 添加适当的%SingleAdbInterface%
和%CompositeAdbInterface%后,
项到 android_winusb.inf
文件,我现在看到的Android ADB接口在我的设备管理器。但是,运行 ADB设备
在命令行没有显示设备。
I have a HP Slate 21 that is connected to my Windows box using a USB cable. USB debugging is enabled on the device. After adding the proper %SingleAdbInterface%
and %CompositeAdbInterface%
entries to the android_winusb.inf
file, I now see "Android ADB Interface" in my Device Manager. However, running adb devices
at the command-line does not show the device.
我还有一个惠普Slate 7,显示了就好在 ADB设备
。
I have another HP slate 7 that shows up just fine under adb devices
.
我从设备管理器中看到的唯一区别是,一个工程被命名为Android的复合亚行界面,另一个被命名为Android的亚行界面。
The only difference I see from Device Manager is that the one that works is named "Android Composite ADB Interface" and the other one is named "Android ADB Interface."
另外还有一种微妙的区别。在winusb.inf文件,板岩7我有两个%CompositeAdbInterface%
定义的项目,但对于板岩21,只有一个%CompositeAdbInterface%
条目定义。
There is yet another subtle difference. In the winusb.inf file, for Slate 7 I have two %CompositeAdbInterface%
entries defined but for Slate 21, there is just one %CompositeAdbInterface%
entry defined.
可能是什么毛病我的设置?
What could be wrong with my setup?
推荐答案
貌似安装的驱动程序是在恶劣的状态。这是我做过什么,使其工作:
Looks like the installed driver was in bad state. Here is what I did to make it work:
- 从设备管理器中删除该设备。
- 重新扫描检测硬件改动。
- 列表项目板岩21会显示为未知的驱动程序的状态。
- 单击更新驱动程序,然后选择/演员/谷歌/ usb_driver
设备管理器查找驱动程序,并警告你如何安装它。选择是。 这一次的设备得到正确安装。
Device Manager will find the driver and warn you about installing it. Select "Yes." This time the device got installed properly.
请注意,我没有修改winusb.inf文件或更新任何其他驱动程序。
Note that I didn't have to modify winusb.inf file or update any other driver.
希望这有助于。
这篇关于Android设备不会亚行列表中显示出来的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!