DummyNet错误NDIS驱动程序安装在Windows 7 x64上 [英] DummyNet error NDIS drivers install on Windows 7 x64

问题描述

我已经下载了 DummyNet 的当前版本，并根据

I've download the current version of DummyNet and according to readme I'm following these steps:

Windows:安装NDIS驱动程序

Windows: INSTALL THE NDIS DRIVER

• 打开所用网卡的配置面板 (右键单击SYSTRAY上的图标，或转到 控制面板->网络，然后选择一张卡)
• 单击属性"->安装"->服务"->添加"
• 单击驱动器磁盘"，然后在此文件夹中选择"netipfw.inf"
• 选择"ipfw + dummynet"，这是您应该看到的唯一服务
• 在警告上单击接受"以安装未知的文件 驱动程序(每个现有网卡大约两次)

• open the configuration panel for the network card in use (right click on the icon on the SYSTRAY, or go to Control Panel -> Network and select one card)
• click on Properties->Install->Service->Add
• click on 'Driver Disk' and select 'netipfw.inf' in this folder
• select 'ipfw+dummynet' which is the only service you should see
• click accept on the warnings for the installation of an unknown driver (roughly twice per existing network card)

但是，当我选择"netipfw.inf"并单击确定"时，系统返回错误(无法找到该设备的任何驱动程序).

But when I select 'netipfw.inf' and click OK the system return an error (unable to find any drivers for this device).

请注意，我之前已经禁用了Start-> Exec上以下命令的数字签名键入检查控件:

Note that I've previously disabled the check control for digital signature typing on Start->Exec the following command:

bcdedit /set nointegritychecks ON

并重新构建系统.

我需要能够解决此问题，因为当我尝试执行一些dummynet命令时，系统将返回:

I need to be able to solve this issue because when I try to execute some dummynet command the system returns:

my_socket failed 2, cannot talk to kernel module
ipfw: socket

我的网卡是集成在我的主板Asus Striker II上的NVIDIA nForce.

My network card is a NVIDIA nForce integrated on my mother board Asus Striker II.

您有解决问题的主意吗?谢谢.

Have you any idea to solve the problem? Thanks.

推荐答案

我能够使用Windows 7 x64使其正常工作.

I was able to get this working using Windows 7 x64.

下载 DummyNet .

将文件从ipfw3-2012\binary64移动到ipfw3-2012\binary，选择 移动并替换

Move the files from ipfw3-2012\binary64 to ipfw3-2012\binary, choose Move and Replace

使用ipfw3-2012\binary\README.txt中的说明安装驱动程序.

Install the driver using instruction in ipfw3-2012\binary\README.txt.

请注意，我必须使用Disable Driver Signature Enforcement重新启动，详细信息 在安装驱动程序之前，请 此处 .应该看起来像这样

Note I had to reboot with Disable Driver Signature Enforcement as detailed here before I could install the driver. Should look like this

这篇关于DummyNet错误NDIS驱动程序安装在Windows 7 x64上的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！