tiny6410friendlyarm 连接到电容式液晶显示器，但触摸在 linux 中不起作用 [英] tiny6410 friendlyarm connect to capacitive lcd but touch not worked in linux

问题描述

我将我的电容式液晶显示器连接到 tiny6410 并在其上安装 linux.我还将friendlyarm.ini 更改为:

I connect my Capacitive lcd to tiny6410 and install linux on it. I also change the friendlyarm.ini to this:

#This line cannot be removed. by FriendlyARM(www.arm9.net)

CheckOneButton=No
Action=Install
OS= Linux

LCD-Mode = No
LCD-Type = S70

LowFormat = No
VerifyNandWrite = No
CheckCRC32=No


StatusType = Beeper| LED

#################### Linux #####################
Linux-BootLoader = Superboot-6410.bin
Linux-Kernel = Linux/zImage
Linux-CommandLine = root=/dev/mtdblock2 rootfstype=yaffs2 init=/linuxrc console=ttySAC0,115200 skipcali=yes ctp=2
Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4.img
Linux-RootFs-RunImage = Linux/rootfs_qtopia_qt4.ext3

并使用 ctp=1(不起作用)，ctp=2(不起作用)，ctp=3(不起作用)我的 lcd 是 S70(当安装 linux 时，它写在屏幕上的 lcd 类型是 S70(自动检测))

and play with ctp=1 (not work),ctp=2 (not work),ctp=3 (not work) my lcd is S70(when linux is install it writes on screen lcd type is S70 (auto detect))

这个设备起初有电阻式液晶显示器，但它坏了然后我换了它到电容式液晶显示器但触摸不起作用.

this device has resistive lcd at first but it was broken then I changed it to capacitive lcd but touch not work .

推荐答案

我找到了答案.不要尝试，tiny6410 不支持电容式 LCD 触摸屏.(这是工厂回答)

I find the answer. Do not try, tiny6410 does not support capacitive LCD touch screen.(this is factory answer)

这篇关于tiny6410friendlyarm 连接到电容式液晶显示器，但触摸在 linux 中不起作用的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！