获取 python docker 容器与 redis docker 容器交互 [英] get a python docker container to interact with a redis docker container

问题描述

我是 docker、redis 和任何类型的网络的新手，(我至少知道 python！).首先，我想出了如何获取 redis docker 映像并在 docker 容器中运行它:

I'm new to docker, redis and any kind of networking, (I know python at least!). Firstly I have figured out how to get a redis docker image and run it in a docker container:

docker run --name some-redis -d redis

据我了解，此 redis 实例具有可用于连接其他容器的端口 6379.

As I understand this redis instance has port 6379 available to connect to other containers.

docker network inspect bridge

   "Containers": {
        "2ecceba2756abf20d5396078fd9b2ecf0d60ab04ca6b8df5e1b631b6fb5e9a85": {
            "Name": "some-redis",
            "EndpointID": "09f0069dae3632a2456cb4d82ad5e7c9782a2b58cb7a4ee655f57b5c410c3e87",
            "MacAddress": "02:42:ac:11:00:02",
            "IPv4Address": "172.17.0.2/16",
            "IPv6Address": ""
        }

如果我运行以下命令，我可以与 redis 实例交互并生成键:值对:

If I run the following command I can interact with the redis instance and generate key:value pairs:

docker run -it --link some-redis:redis --rm redis redis-cli -h redis -p 6379
set 'a' 'abc'
>OK
get 'a'
>"abc"
quit

我已经知道如何制作和运行安装了 redis 库的 docker 容器，该容器将运行以下 python 脚本:

I have figured out how to make and run a docker container with the redis library installed that will run a python script as follows:

这是我的 Dockerfile:

Here is my Dockerfile:

FROM python:3
ADD redis_test_script.py /
RUN pip install redis 
CMD [ "python", "./redis_test_script.py" ]

这里是redis_test_script.py:

Here is redis_test_script.py:

import redis
print("hello redis-py")

构建 docker 镜像:

Build the docker image:

docker build -t python-redis-py .

如果我运行以下命令，脚本将在其容器中运行:

If I run the following command the script runs in its container:

docker run -it --rm --name pyRed python-redis-py

并返回预期的:

>hello redis-py

看起来两个容器都工作正常，问题是将它们连接在一起，我想最终使用python对redis容器执行操作.如果我按如下方式修改脚本并为 python 容器重建图像，它将失败:

It seems like both containers are working ok, the problem is connecting them both together, I would like to ultimately use python to perform operation on the redis container. If I modify the script as follows and rebuild the image for the python container it fails:

import redis
print("hello redis-py")
r = redis.Redis(host="localhost", port=6379, db=0)
r.set('z', 'xyz')
r.get('z')

我收到几个错误:

...
OSError: [Errno 99] Cannot assign requested address
...
redis.exceptions.ConnectionError: Error 99 connecting to localhost:6379. Cannot assign requested address.
.....

看起来他们没有连接，我再次尝试在 python 脚本中使用网桥 IP:

It looks like they're not connecting, I tried again using the bridge IP in the python script:

r = redis.Redis(host="172.17.0.0/16", port=6379, db=0)

并得到这个错误:

redis.exceptions.ConnectionError: Error -2 connecting to 172.17.0.0/16:6379. Name or service not known.

我尝试了redis子IP:

and I tried the redis sub IP:

r = redis.Redis(host="172.17.0.2/16", port=6379, db=0)

我得到这个错误:

redis.exceptions.ConnectionError: Error -2 connecting to 172.17.0.2/16:6379. Name or service not known.

感觉好像我从根本上误解了如何让容器相互通信的一些东西.我已经阅读了很多文档和教程，但正如我所说，没有网络经验并且以前没有使用过 docker，所以任何有用的解释和/或解决方案都会非常棒.

It feels like I'm fundamentally misunderstanding something about how to get the containers to talk to each other. I've read quite a lot of documentation and tutorials but as I say have no networking experience and have not previously used docker so any helpful explanations and/or solutions would be really great.

非常感谢

推荐答案

这就是 Docker 网络的全部内容.快速解决方案 - 对两个容器使用 host 网络模式.缺点是隔离度低，但你会得到它的快速工作:

That's all about Docker networking. Fast solution - use host network mode for both containers. Drawback is low isolation, but you will get it working fast:

docker run -d --network=host redis ...
docker run --network=host python-redis-py ...

然后从 python 连接到 redis 只需使用 localhost 作为主机名.

Then to connect from python to redis just use localhost as a hostname.

更好的解决方案是使用docker用户定义的桥接网络

Better solution is to use docker user-defined bridge network

# create network
docker network create foo
docker run -d --network=foo --name my-db redis ...
docker run    --network=foo python-redis-py ...

请注意，在这种情况下，您不能使用 localhost 而是使用 my-db 作为主机名.这就是我在启动第一个容器时使用 --name my-db 参数的原因.在用户定义的桥接网络中，容器通过名称相互连接.

Note that in this case you cannot use localhost but instead use my-db as a hostname. That's why I've used --name my-db parameter when starting first container. In user-defined bridge networks containers reach each other by theirs names.

这篇关于获取 python docker 容器与 redis docker 容器交互的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！