打开命令按钮向导Access 2003 ... [英] Turn on command button wizard Access 2003...
问题描述
在学习之后，昨晚获得了欢乐，确实，可以打开或关闭命令按钮向导。好吧，这次发生在这里，我的Access 2000 ...尝试重做工作失败。
这是场景，非常有趣，我会尝试总结这很快:-)
在家里，当命令按钮向导（Access 2000）加载并给我一些精彩的选项/选择提示时，结果代码是预先编写的完成后的按钮。
我发现工作不是这样，所以我去了源头。 Office 2003页面模板和样本确认魔术棒像Access中可用的按钮打开或关闭，因此开始行动的原因:-)
当我尝试时，我的下巴像石头一样掉下来今天早上按钮不是魔术，魔杖按钮不会被推入，它回来了，相当顺利的方式，为代码屏幕腾出空间而不是......
我现在正在微笑，就像我现在做的那样。我有一种感觉，在逻辑上可以通过Access 2003启动一个漂亮的向导...大量信息似乎指向它
旁注：表格/数据库我am building似乎可以选择将Access数据库从2000转换为2000 - 2003版本的Access。我今天发现了。到那时我筋疲力尽，我稍后会调查。老板说，毫无疑问，我们正在运行2003年。
这并不像我希望的那么简短，对不起。但你有什么想法？你看到了什么？
Jumped for joy last night after learning, indeed, the command button wizard can be switched on or off. Well this occured here, with my Access 2000...an attempt to redo at work failed.
Here''s the scenario, quite amusing, and I''ll try to sum this up quickly:-)
At home, when the command button wizard (Access 2000) loads and give me some wonderful options/selection tips, the result, code is pre-written for the button when completed.
I found out it is not so at work, so I went to the source. Office 2003 page templates and samples confirmed magic wand like button available in Access turns it on or off, thus reason for jumping into action:-)
my jaw dropped like a stone when I attempted this morning and button was not magic, wand button would not stay pushed in, it came back, rather smoothly by the way, making room for the code screen to pop up instead...
I am smiling now, just as I did just now 5ish. I have a feeling ti''s logically possible to fire a nice wizard through Access 2003...loads of information seem to point to it
Side Note: the form/database that I am building seems to have an option to "Convert the Access database from 2000 to 2000 - 2003 Version of Access. I found out today. By then I was drained, I''ll look into that later on. We are running 2003, no doubt, says the boss.
This was not as brief as I''d hoped, sorry about that. But what are your thoughts? What do you see happening?
推荐答案
我现在在这里注册了，但是对于你在问什么却有点困惑。
该向导在2003年在家工作，但在2000年没有工作吗？
我不得不承认我自己并没有使用这些巫师，虽然我知道很多专家都有经验跟他们。如果你让我知道你需要什么，我会尽力帮助。
I''m registered in here now, but a little confused as to what you''re asking.
The wizard works on 2003 at home but not on 2000 at work?
I have to admit I don''t use the wizards much myself, although I know a number of the experts are experienced with them. I''ll try to help though, if you let me know what you need.
我现在在这里注册，但是对于你在问什么感到有点困惑。
这个向导在2003年在家工作但在2000年没工作？
我不得不承认我不在虽然我知道有很多专家对他们很有经验，但我自己并没有使用这些巫师。如果你让我知道你需要什么，我会尽力帮助你。
I''m registered in here now, but a little confused as to what you''re asking.
The wizard works on 2003 at home but not on 2000 at work?
I have to admit I don''t use the wizards much myself, although I know a number of the experts are experienced with them. I''ll try to help though, if you let me know what you need.
请原谅..
反过来，工作负载2003，向导不起作用那里（魔法棒在推动时触发代码屏幕，按Office 2003网站建议选择按钮），我在这里禁用向导，在我的机器上使用2000，它可以正确地与我的需求进行交互...
感谢您对此进行调查，我实际上在该网站上进行了简短的制动：
http://office.microsoft.com/en-us/ac...888401033.aspx
选择创建新数据访问页面和命令按钮，该页面是指向该页面的超链接
信息建议向导可以打开，但是我发生的是弹出一个窗口并给我一组选项：
（1）是否使用按钮打开报告，表单，运行查询，拨打电话，发送电子邮件等等...
（2）设置完毕后，当按下表单加载和按钮时，按钮可以工作。
这意味着选项我可以在2000年使用，在2003年看似稀缺，或者不是，我还在寻找......
Excuse the confusion..
It''s the other way around, work loads 2003, wizard does not work there (magic wand fires code screen when pushed, with button selected as suggested by Office 2003 site), I disabled wizard here, on my machine with 2000, it interacts correctly to my demands...
Thanks for looking into this, I am on a brief brake form the site actually:
http://office.microsoft.com/en-us/ac...888401033.aspx
Choose "Create a new data access page and a command button that''s a hyperlink to that page"
The information suggests wizard can be turned on, but what happens by me is a window pops up and give me a set of options:
(1) Whether to use a the button for open a report, form, run a query, make telephone call, send email, etc...
(2) After all is set, when the form load and button is pressed, the button ges to work.
What this means is the options available to me in 2000, are seemingly scarce in 2003, Or not, I''m still looking...
原谅混乱..
反过来，工作负载2003，向导无法在那里工作（魔棒在推送时触发代码屏幕，按Office 2003网站建议选择按钮），我在这里禁用向导，在我的2000机器上，它正确地与我的需求相互作用...
感谢您对此进行调查，我实际上是在一个简短的制动器上：
http：// office .microsoft.com / zh-CN / ac ... 888401033.aspx
选择创建新的数据访问页面和一个超链接的命令按钮那个pa ge"
信息建议向导可以打开，但是我发生的事情是弹出一个窗口并给我一组选项：
（1）是否使用按钮打开报告，表格，查询，拨打电话，发送电子邮件等...
（2）之后全部设置，当按下表单加载和按钮时，按钮可以工作。
这意味着我在2000年可用的选项，在2003年看似稀缺，或者不，我还在寻找......
Excuse the confusion..
It''s the other way around, work loads 2003, wizard does not work there (magic wand fires code screen when pushed, with button selected as suggested by Office 2003 site), I disabled wizard here, on my machine with 2000, it interacts correctly to my demands...
Thanks for looking into this, I am on a brief brake form the site actually:
http://office.microsoft.com/en-us/ac...888401033.aspx
Choose "Create a new data access page and a command button that''s a hyperlink to that page"
The information suggests wizard can be turned on, but what happens by me is a window pops up and give me a set of options:
(1) Whether to use a the button for open a report, form, run a query, make telephone call, send email, etc...
(2) After all is set, when the form load and button is pressed, the button ges to work.
What this means is the options available to me in 2000, are seemingly scarce in 2003, Or not, I''m still looking...
这是一个通过Access 2000创建的saple代码，命令按钮向导：
Here is a saple code created through Access 2000, command button wizard:
这篇关于打开命令按钮向导Access 2003 ...的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
