WEC2013采用TI OMAP4470的Blaze Tablet 2 BSP [英] WEC2013 BSP for Blaze Tablet 2 with TI OMAP4470
问题描述
我已成功为使用TI OMAP4470 CPU的Blaze Tablet 2板编译了附带的WEC2013 BSP。
我假设这个WEC 2013参考BSP由Adeneo创建。
I have successfully compiled the included WEC2013 BSP for the Blaze Tablet 2 board with TI OMAP4470 CPU.
I assume this WEC 2013 reference BSP was created by Adeneo.
不幸的是,没有文档说明如何创建可启动的SD卡以及需要哪些文件。
Unfortunately there exist no documentation how to create a bootable SDcard and which files are required for this.
I尝试将以下文件从发布目录复制到FAT32格式的SD卡:
MLO,boot.cfg,eboot.bin,ebootsd.raw,NK.bin,xldremmc.img
I have tried to copy the following files from the release directory to an FAT32 formatted SDcard:
MLO, boot.cfg, eboot.bin, ebootsd.raw, NK.bin, xldremmc.img
并将Blaze Tablet 2启动选择跳线更改为从此SD卡启动。
and changed the Blaze Tablet 2 boot selection jumpers to boot from this SDCard.
图像未加载且没有串行eboot启动消息。
The image is not loaded and there are no serial eboot startup messages.
有没有人试过这个?
Frank
推荐答案
SDCard中是否有多个分区,在这种情况下你必须复制文件到活动部分你可以在复制启动文件后将其标记为活动状态。
Do you have more than one partition in the SDCard,in which case you have to copy the files to the active partition or you can mark it as active after copying the boot files.
你在终端中尝试的串口设置是什么?我相信它是38400 N-8-1。
What is the serial port setting you tried in your terminal?I belive it is 38400 N-8-1.
问候,
Prabu [eMVP]
Prabu [eMVP]
这篇关于WEC2013采用TI OMAP4470的Blaze Tablet 2 BSP的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!