司机娱乐时间 [英] Drivers Funtime

问题描述

所以说我试图将我的kinect 360 xbox连接到我的笔记本电脑很简单，因为我需要它来开发我的应用程序。

我已经安装了kinect对于Windows SDK 1.8，因为我在我的笔记本电脑上运行64个Windows 7，除此之外我还安装了kinect开发人员工具包（也是1.8版），以便尝试运行传感器并在继续之前测试它到
使用它我的项目。

现在我遇到的问题是，所有驱动程序都已正确安装，除了"Kinect for Windows Camera"，它就是这个状态/错误。

（我原谅任何错误的翻译）

"驱动程序的ditital签名，这个设备需要，不能得到确认。硬件或软件的更改可能导致安装文件，该文件被错误地签名，损坏或者是来自未知来源的潜在有害软件
（代码52）"

我尝试重新安装sdk和套件，清除kinect中的旧驱动程序，避免使用unessesary windows更新，但都没有成功。

此外我尝试强制更新通过手动查找驱动程序，虽然它具有相同的状态/错误，并在前面描述过。

因为该设备是我大学的租赁我不知道它是否有任何物理损坏，看到它也没有任何明显的证据。

现在我的问题是，有什么我忘记尝试或做软件方式，或者我可以得出结论传感器本身可能有物理缺陷导致它无法安装"Kinect for Windows Camera"驱动程序，在这种情况下
我会尝试返回它并可能测试大学提供的其他动力。

解决方案

您是否在同一台计算机上为Kinect安装了任何其他驱动程序/ SDK？如果您安装了OpenNI或其他第三方SDK，则会知道这些会干扰驱动程序。彻底清除与Kinect相关的任何内容并重新安装SDK。
执行此操作时可能需要确保传感器已断开连接，以确保驱动程序/文件未被使用。

下载SDK的官方网站来自Microsoft网站。确认您已从官方来源下载SDK。


http://www.microsoft。 com / zh-CN / download / details.aspx？id = 40278

http://www.microsoft.com/en-us/download/details.aspx?id=40276

So to put is simple im trying to connect my kinect 360 xbox to my laptop, as I need it for the development of my application.

I have installed the kinect for windows SDK 1.8, as im running 64 windows 7 on my laptop, in addition to this I have also installed the kinect developers tool kit (also version 1.8), in order to try and run the sensor as well as test it before going on to using it my project.

Now the issue that i am experiencing is that, all drivers have been installed correctly, except "Kinect for Windows Camera", which hits this status/error.

(and i excuse any faulty translation)

"The ditital signature of the drivers, which this device needs, could not be confirmed. A change in the hardware or software can have caused, the the installation of a file, which is either signed wrongly, damaged or is a potentially harmfull software from an unknown source (code 52)"

I have tried reinstalling the sdk and kit, clearing the old drivers from the kinect, avoiding unessesary windows updates, all without success.

in addition i tried force updating the driver by manually finding it, though it yeild the same status/error, and described earlier.

as the device is a rental from the my university i am unaware if it has any physical damage, seeing as it also dont havin any visible evidence of this.

now my questions is, is there anything I have forgotten to try or do software-wise, or can i conclude that the sensor itself might have a physical defect causing it to not be able to install the "Kinect for Windows Camera" driver, in which case I will try return it and possibly test the other kinects the university has to offer.

解决方案

Do you have any other drivers/SDK's installed for Kinect on the same machine? If you have OpenNI or other third party SDK's installed, these are known to interfere with the driver. Do a clean removal of anything related to Kinect and reinstall the SDK again. You may need to make sure the sensor is disconnected when doing this to ensure drivers/files are not in use.

The official site to download the SDK is from the Microsoft website. Confirm you have downloaded the SDK from an official source.
http://www.microsoft.com/en-us/download/details.aspx?id=40278

http://www.microsoft.com/en-us/download/details.aspx?id=40276

这篇关于司机娱乐时间的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！