macOS X Mojave 10.14 Beta FTDI USB串行驱动程序 [英] macOS X Mojave 10.14 Beta FTDI USB Serial Driver

问题描述

我刚刚安装了macOS Mojave 10.14 Beta，当我将Arduino连接到USB端口时，我的Arduino IDE端口列表中什么都没有出现.

I just installed macOS Mojave 10.14 Beta and when i connect an Arduino to the USB port, nothing appears in my Arduino IDE ports list.

如果我尝试ls /dev/tty.*，我只会看到/dev/tty.Bluetooth-Incoming-Port已连接. 在macOS 10.13上，一切正常. 我尝试重新安装驱动程序( http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_4_2.dmg )多次，我也尝试按照 https://learn.sparkfun.com/tutorials/how-to-install-ftdi-drivers/mac ，但是端口永远不会出现. 有建议吗?

if i try ls /dev/tty.* i just see /dev/tty.Bluetooth-Incoming-Port connected. On macOS 10.13 everything was working ok. I tried reinstalling the driver ( http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_4_2.dmg ) many times, I also tried following https://learn.sparkfun.com/tutorials/how-to-install-ftdi-drivers/mac but the port never appear. Suggestions?

推荐答案

为我解决了更新驱动程序的问题(请使用以下驱动程序):

Solved for me updating the driver (Use the one below):

Mac OS X 10.9及更高版本 该驱动程序由Apple签名

Mac OS X 10.9 and above This driver is signed by Apple

https://www.ftdichip.com/Drivers/VCP.htm

这篇关于macOS X Mojave 10.14 Beta FTDI USB串行驱动程序的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！