macOS X Mojave 10.14 Beta FTDI USB 串行驱动程序 [英] macOS X Mojave 10.14 Beta FTDI USB Serial Driver
问题描述
我刚刚安装了 macOS Mojave 10.14 Beta,当我将 Arduino 连接到 USB 端口时,我的 Arduino IDE 端口列表中没有显示任何内容.
I just installed macOS Mojave 10.14 Beta and when i connect an Arduino to the USB port, nothing appears in my Arduino IDE ports list.
如果我尝试 ls/dev/tty.*
我只看到 /dev/tty.Bluetooth-Incoming-Port
已连接.在 macOS 10.13 上一切正常.我尝试重新安装驱动程序( http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_4_2.dmg ) 很多次,我也尝试遵循 https://learn.sparkfun.com/tutorials/how-to-install-ftdi-drivers/mac 但端口从未出现.建议?
if i try ls /dev/tty.*
i just see /dev/tty.Bluetooth-Incoming-Port
connected.
On macOS 10.13 everything was working ok.
I tried reinstalling the driver ( http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_4_2.dmg ) many times, I also tried following https://learn.sparkfun.com/tutorials/how-to-install-ftdi-drivers/mac but the port never appear.
Suggestions?
推荐答案
为我解决了更新驱动程序(使用下面的一个):
Solved for me updating the driver (Use the one below):
Mac OS X 10.9 及以上此驱动程序由 Apple 签名
Mac OS X 10.9 and above This driver is signed by Apple
https://www.ftdichip.com/Drivers/VCP.htm
这篇关于macOS X Mojave 10.14 Beta FTDI USB 串行驱动程序的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!