Zebra RZ400 打印 RFID 标签,但对后续标签进行编码 [英] Zebra RZ400 prints an RFID tag, but encodes the subsequent one
问题描述
我第一次尝试使用我的 RZ400.我已经放置了 RFID 标签和色带,校准了介质并发送了
I'm trying to use my RZ400 for the first time. I have placed the RFID tags and the ribbon, calibrated the media and sent the
^XA
^RS8
^FO50,50^A0N,65^FDHex Pattern 1^FS
^RFW,H^FD112233445566778899AABBCC^FS
^XZ
来自编程手册的说明和打印的 RFID 标签.问题是 NEXT 标签是被编码的标签.
instructions from the programming manual and a RFID tag is printed. The problem is that the NEXT tag is the one that gets encoded.
标签为 SMARTRAC 292-2 腰带,尺寸为 3x0.625 英寸.这是供应商支持的标签.
The tags are SMARTRAC 292-2 Belt and the dimensions are 3x0.625 inches. This is a supported tag according to the vendor.
谢谢.
推荐答案
这个问题发生在我使用同一台打印机,但从 Label Matrix 软件打印时.我使用的是开箱即用的 Confidex Casey,但后来切换到 Confidex Carrier Pro,问题开始发生.
This problem happened to me with the same printer, but printing from Label Matrix software. I was using a Confidex Casey that worked out of the box, but then switched to a Confidex Carrier Pro and the problem started to happen.
发生这种情况是因为打印机没有使用您使用的标签正确校准.
This happens because the printer is not properly calibrated with the Tag you are using.
您需要按照 Zebra RZ400 嵌体放置指南,用于校准您的标签.您可以做三件事:
You need to follow the instructions on the Zebra RZ400 Inlay Placement Guidelines for calibrating your Tag. There are three things you can do:
- 在打印机的前面板上运行 RFID 校准命令.再试一次.
- 如果它仍在标记下一个,则再次运行该命令,但使用选项 RESTORE 来恢复先前的校准.再试一次.
- 如果它仍然不起作用,您将需要使用我链接的手册中的指南,使用 SetGetDo 命令针对打印机手动校准 Pitch 值.
祝你好运.
这篇关于Zebra RZ400 打印 RFID 标签,但对后续标签进行编码的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!