ansible - cisco IOS 和“重新加载";命令 [英] ansible - cisco IOS and "reload" command
问题描述
我想向 Cisco IOS 发送命令reload in",但需要确认该特定命令,如下所示:
I would like to send command "reload in " to Cisco IOS, but that specific command needs to be confirmed like below:
#reload in 30
Reload scheduled in 30 minutes by admin on vty0 (192.168.253.15)
Proceed with reload? [confirm]
好像 ios_command 模块不处理这种情况.我的配置:
It semms like ios_command module doesn't handle such case. My configuration:
tasks:
- name: do reload in case of "catting off"
ios_command:
commands: reload in 30
commands: y
provider: "{{ cli }}"
来自剧本的回应:
TASK [do reload in case of "catting off"] **************************************
task path: /etc/ansible/test1.yml:14
<192.168.0.33> ESTABLISH LOCAL CONNECTION FOR USER: root
<192.168.0.33> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271 `" && echo ansible-tmp-1476454008.17-103724241654271="` echo $HOME/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271 `" ) && sleep 0'
<192.168.0.33> PUT /tmp/tmpAJiZR2 TO /root/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271/ios_command
<192.168.0.33> EXEC /bin/sh -c 'LANG=pl_PL.UTF-8 LC_ALL=pl_PL.UTF-8 LC_MESSAGES=pl_PL.UTF-8 /usr/bin/python /root/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271/ios_command; rm -rf "/root/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271/" > /dev/null 2>&1 && sleep 0'
fatal: [192.168.0.33]: FAILED! => {"changed": false, "commands": ["y"], "failed": true, "invocation": {"module_args": {"auth_pass": null, "authorize": false, "commands": ["y"], "host": "192.168.0.33", "interval": 1, "password": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", "port": 22, "provider": "{'username': 'admin', 'host': '192.168.0.33', 'password': '********'}", "retries": 10, "ssh_keyfile": null, "timeout": 10, "username": "admin", "waitfor": null}, "module_name": "ios_command"}, "msg": "matched error in response: y\r\n ^\r\n% Invalid input detected at '^' marker.\r\n\r\nsw7.test.lab#"}
我该如何处理?
更新:
如果我尝试在 YAML 文件中使用 expect 模块,如下所示:
If I try to use expect module in YAML file like this:
name: some tests
hosts: sw-test
gather_facts: False
# connection: local
tasks:
- name: do reload in case of "catting off"
expect:
command: reload in 30
responses:
'Reload scheduled in 30 minutes by admin on vty0 (192.168.253.20)\nProceed with reload? \[confirm\]' : y
echo: yes
但是连接有问题:
oot@Kali:/etc/ansible# ansible-playbook test3 -u admin -k -vvvv
Using /etc/ansible/ansible.cfg as config file
SSH password:
Loaded callback default of type stdout, v2.0
PLAYBOOK: test3 ****************************************************************
1 plays in test3
PLAY [some tests] **************************************************************
TASK [do reload in case of "catting off"] **************************************
task path: /etc/ansible/test3:9
<192.168.0.33> ESTABLISH SSH CONNECTION FOR USER: admin
<192.168.0.33> SSH: EXEC sshpass -d12 ssh -C -vvv -o ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o User=admin -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r 192.168.0.33 '/bin/sh -c '"'"'( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1476882070.37-92402455055985 `" && echo ansible-tmp-1476882070.37-92402455055985="` echo $HOME/.ansible/tmp/ansible-tmp-1476882070.37-92402455055985 `" ) && sleep 0'"'"''
<192.168.0.33> PUT /tmp/tmp30wGsF TO "` echo $HOME/.ansible/tmp/ansible-tmp-1476882070.37-92402455055985 `" ) && sleep 0'"/expect
<192.168.0.33> SSH: EXEC sshpass -d12 sftp -o BatchMode=no -b - -C -vvv -o ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o User=admin -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r '[192.168.0.33]'
fatal: [192.168.0.33]: UNREACHABLE! => {"changed": false, "msg": "SSH Error: data could not be sent to the remote host. Make sure this host can be reached over ssh", "unreachable": true}
to retry, use: --limit @/etc/ansible/test3.retry
PLAY RECAP *********************************************************************
192.168.0.33 : ok=0 changed=0 unreachable=1 failed=0
root@Kali:/etc/ansible# ansible-playbook test3 -u admin -k -vvvv -c ssh
Using /etc/ansible/ansible.cfg as config file
SSH password:
Loaded callback default of type stdout, v2.0
PLAYBOOK: test3 ****************************************************************
1 plays in test3
PLAY [some tests] **************************************************************
TASK [do reload in case of "catting off"] **************************************
task path: /etc/ansible/test3:9
<192.168.0.33> ESTABLISH SSH CONNECTION FOR USER: admin
<192.168.0.33> SSH: EXEC sshpass -d12 ssh -C -vvv -o ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o User=admin -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r 192.168.0.33 '/bin/sh -c '"'"'( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1476882145.78-139203779538157 `" && echo ansible-tmp-1476882145.78-139203779538157="` echo $HOME/.ansible/tmp/ansible-tmp-1476882145.78-139203779538157 `" ) && sleep 0'"'"''
<192.168.0.33> PUT /tmp/tmpY5qqyW TO "` echo $HOME/.ansible/tmp/ansible-tmp-1476882145.78-139203779538157 `" ) && sleep 0'"/expect
<192.168.0.33> SSH: EXEC sshpass -d12 sftp -o BatchMode=no -b - -C -vvv -o
ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o User=admin -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r '[192.168.0.33]'
fatal: [192.168.0.33]: UNREACHABLE! => {"changed": false, "msg": "SSH Error: data could not be sent to the remote host. Make sure this host can be reached over ssh", "unreachable": true}
to retry, use: --limit @/etc/ansible/test3.retry
PLAY RECAP *********************************************************************
192.168.0.33 : ok=0 changed=0 unreachable=1 failed=0
root@Kali:/etc/ansible# ansible-playbook test3 -u admin -k -vvvv -c local
Using /etc/ansible/ansible.cfg as config file
SSH password:
Loaded callback default of type stdout, v2.0
PLAYBOOK: test3 ****************************************************************
1 plays in test3
PLAY [some tests] **************************************************************
TASK [do reload in case of "catting off"] **************************************
task path: /etc/ansible/test3:9
<192.168.0.33> ESTABLISH LOCAL CONNECTION FOR USER: root
<192.168.0.33> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809 `" && echo ansible-tmp-1476882426.62-172601217553809="` echo $HOME/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809 `" ) && sleep 0'
<192.168.0.33> PUT /tmp/tmpdq1pYy TO /root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/expect
<192.168.0.33> EXEC /bin/sh -c 'chmod u+x /root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/ /root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/expect && sleep 0'
<192.168.0.33> EXEC /bin/sh -c 'LANG=pl_PL.UTF-8 LC_ALL=pl_PL.UTF-8 LC_MESSAGES=pl_PL.UTF-8 /usr/bin/python /root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/expect; rm -rf "/root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/" > /dev/null 2>&1 && sleep 0'
fatal: [192.168.0.33]: FAILED! => {"changed": false, "failed": true, "invocation": {"module_args": {"chdir": null, "command": "reload in 30", "creates": null, "echo": true, "removes": null, "responses": {"Reload scheduled in 30 minutes by admin on vty0 (192.168.253.20)\\nProceed with reload? \\[confirm\\]": "y"}, "timeout": 30}, "module_name": "expect"}, "msg": "The command was not found or was not executable: reload."}
NO MORE HOSTS LEFT *************************************************************
to retry, use: --limit @/etc/ansible/test3.retry
PLAY RECAP *********************************************************************
192.168.0.33 : ok=0 changed=0 unreachable=0 failed=1
<小时>
更新
我已经安装了 ansible 2.3 并尝试如下:
I've installed ansible 2.3 and tried as follows:
tasks:
- name: do reload in case of "catting off"
ios_command:
commands:
- reload in 30
- y
wait_for:
- result[0] contains "Proceed with reload"
provider: "{{ cli }}"
但是,我仍然收到错误消息.我认为这是因为 ios 模块总是等待提示作为响应.此外,在按下y"后,重新加载命令的确认没有Enter",因此这可能是另一个问题.
But still, I get an error. I think that this is because ios module always wait for a promt as a response. And additionaly confirmation of reload command is without "Enter" after pressing "y" so this could be another problem.
$ sudo ansible-playbook test1.yml -vvvv
Using /etc/ansible/ansible.cfg as config file
Loading callback plugin default of type stdout, v2.0 from /usr/local/lib/python2.7/dist-packages/ansible/plugins/callback/__init__.pyc
PLAYBOOK: test1.yml ************************************************************
1 plays in test1.yml
PLAY [testowe dzialania] *******************************************************
TASK [do reload in case of "catting off"] **************************************
task path: /home/user1/test1.yml:13
Using module file /usr/local/lib/python2.7/dist-packages/ansible/modules/core/network/ios/ios_command.py
<192.168.0.33> ESTABLISH LOCAL CONNECTION FOR USER: root
<192.168.0.33> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324 `" && echo ansible-tmp-1477557527.56-157304653717324="` echo $HOME/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324 `" ) && sleep 0'
<192.168.0.33> PUT /tmp/tmphf8EWO TO /home/mszczesniak/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/ios_command.py
<192.168.0.33> EXEC /bin/sh -c 'chmod u+x /home/mszczesniak/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/ /home/mszczesniak/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/ios_command.py && sleep 0'
<192.168.0.33> EXEC /bin/sh -c '/usr/bin/python /home/mszczesniak/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/ios_command.py; rm -rf "/home/user1/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/" > /dev/null 2>&1 && sleep 0'
fatal: [192.168.0.33]: FAILED! => {
"changed": false,
"failed": true,
"invocation": {
"module_args": {
"auth_pass": null,
"authorize": false,
"commands": [
"reload in 30",
"y"
],
"host": "192.168.0.33",
"interval": 1,
"match": "all",
"password": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER",
"port": null,
"provider": {
"host": "192.168.0.33",
"password": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER",
"username": "admin"
},
"retries": 10,
"ssh_keyfile": null,
"timeout": 10,
"transport": null,
"use_ssl": true,
"username": "admin",
"validate_certs": true,
"wait_for": [
"result[0] contains \"Proceed with reload\""
]
},
"module_name": "ios_command"
},
"msg": "timeout trying to send command: reload in 30\r"
}
to retry, use: --limit @/home/user1/test1.retry
PLAY RECAP *********************************************************************
192.168.0.33 : ok=0 changed=0 unreachable=0 failed=1
谁能知道如何在 ansible 或 maby 中解决该问题,唯一的方法是使用纯 python 脚本或编写自己的 ansible 模块?
Can anyone have any idea how to resolve that problem in ansible or maby the only way is to use pure python script or write own ansible module?
推荐答案
您可以使用:
- name: reload device
ios_command:
commands:
- "reload in 1\ny"
provider: "{{ cli }}"
这将在 1 分钟内重新加载设备并接受重新加载提示.它对 ansible 很有效,因为 ios 的默认提示会回来(重新加载会在 1 分钟内触发).
This will reload the device in 1 minute and the reload prompt gets accepted. It works well for ansible because the default prompt of ios will come back (reload gets triggered in 1 minute).
问候,西蒙
这篇关于ansible - cisco IOS 和“重新加载";命令的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!