Kinect V2传感器 - 设备无法启动 [英] Kinect V2 Sensor - Device Cannot Start

问题描述

祝贺所有人！

我有一个标准的HP桌面，运行完全更新的Windows 8.1，内存很多，配有瑞萨USB 3.0适配器。

我已经启动了Kinect V2并将其插入USB 3.0适配器（此USB集线器上没有其他设备）。

当像Kinect V2 Studio这样的程序启动时很好，并且"连接"和"监视"不要给出错误 （你可以看到时钟滴答滴答），我在监视器窗口中看不到任何内容。

所以，看看设备管理器，我看到"设备无法启动"对于"WDF Kinect传感器接口0"，当然，设备管理器中的图标有致命的黄色感叹号。  （另外："当前设备电源状态不能
支持他的请求"）。

Renesas USB 3.0适配器板有一个SATA电源插头，因此USB有足够的电源端口。

看不出有什么问题。 希望微软有一个"验证"应用程序，可以帮助解决问题。

任何想法？

干杯，罗伯特摩尔

解决方案

M'soft DOES有一个验证工具，用于检查系统的兼容性。链接在此页面：http：//www.microsoft.com/en-us/kinectforwindows/purchase/sensor_setup.aspx

 

Greetings all!

I have a standard HP desktop running a fully updated Windows 8.1, plently of RAM, with a Renesas USB 3.0 adapter.

I have powered up the Kinect V2 and plugged it into the USB 3.0 adapter (there are no other devices on this USB hub).

While programs like Kinect V2 Studio start up just fine and "connect" and "monitor" don't give errors (you can see the clock ticking away), I'm not seeing anything in the monitor window.

So, looking at Device Manger, I see "Device Cannot Start" for the "WDF Kinect Sensor Interface 0" and, of course, the icon in Device Manager has the deadly yellow exclamation mark.  (Also: "Current Device Power State cannot support his request").

The Renesas USB 3.0 adapter board has a SATA power plug so there's plenty of power to the USB port.

Can't see what's wrong.  Wish that Microsoft had a 'verification' app that would help troubleshoot the box.

Any ideas??

Cheers, Robert Moore

解决方案

M'soft DOES have a verification tool that checks your system for compatibility. Link is on this page : http://www.microsoft.com/en-us/kinectforwindows/purchase/sensor_setup.aspx

 

这篇关于Kinect V2传感器 - 设备无法启动的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！