Windows Phone模拟器未启动(无法设置UDP端口) [英] Windows Phone emulator not starting (couldn`t setup the UDP port)

问题描述

在更新Windows 10以构建10061 Windows Phone仿真器(所有8.1和10)之后，停止启动.我收到以下错误: "Windows Phone Emulator无法连接到Windows Phone操作系统.无法设置UDP端口"

After updating Windows 10 to build 10061 windows phone emulators (all 8.1 and 10) stopped starting. I get the following error: "Windows Phone Emulator is unable to connect to the Windows Phone operating system. Couldn`t setup the UDP port"

我尝试了修复"模拟器，但没有任何改变.

I tried "reparing" emulators, but nothing changed.

Hyper-V管理器显示虚拟机正常运行，可以直接从Hyper-V管理器启动虚拟机. 如我所说，在以前的Windows 10 TP版本中，还可以.

Hyper-V manager shows that virtual machine works, and it can be started directly from Hyper-V manager. As i said, in previous windows 10 TP builds it was OK.

推荐答案

您是否在控制面板\网络和Internet \网络连接"下看到虚拟交换机"信息?如果没有，您可以尝试再次从Hyper-V重新创建"Windows Phone Emulator内部开关"，以查看是否可以解决您的问题.请尝试以下步骤:

Do you see your "Virtual Switch" information under: Control Panel\Network and Internet\Network Connections? If not, you can try to recreate your "Windows Phone Emulator Internal Switch" again from Hyper-V to see if that resolves your issue. Try these steps below:

1.)打开Hyper-V

1.) Open Hyper-V

2.)关闭所有现有的已配置电话仿真器.

2.) Shutdown any existing configured Phone emulators.

3.)单击虚拟交换机管理器"

3.) Click on "Virtual Switch Manager"

4.)单击"Windows Phone Emulator内部开关"

4.) Click on the "Windows Phone Emulator Internal Switch"

5.)记住那里显示的设置(因为您将其删除并重新创建)

5.) Remember what the settings are displayed there (because you will delete it and recreate it)

6.)通过单击删除"删除现有的"Windows Phone Emulator内部开关"

6.) Delete the existing "Windows Phone Emulator Internal Switch" by clicking "Remove"

7.)单击应用"并单击确定"

7.) Click "Apply" and "OK"

8.)通过单击新建虚拟网络开关"重新创建"Windows Phone Emulator内部开关"，并使用在步骤5中记住的相同设置.

8.) Re-create the "Windows Phone Emulator Internal Switch" by clicking the "New virtual network switch" and use the same settings you remembered in Step 5.

9.)然后尝试从Visual Studio转到F5，这应该在正确的虚拟交换机上配置一个新的模拟器.

9.) Then try to F5 from Visual Studio - which should configure a new emulator on the right virtual switch.

这篇关于Windows Phone模拟器未启动(无法设置UDP端口)的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！