Windows Phone 模拟器无法启动(无法设置 UDP 端口) [英] Windows Phone emulator not starting (couldn`t setup the UDP port)

问题描述

更新 Windows 10 以构建 10061 Windows Phone 模拟器(所有 8.1 和 10)后停止启动.我收到以下错误:Windows Phone 模拟器无法连接到 Windows Phone 操作系统.无法设置 UDP 端口"

After updating Windows 10 to build 10061 windows phone emulators (all 8.1 and 10) stopped starting. I get the following error: "Windows Phone Emulator is unable to connect to the Windows Phone operating system. Couldn`t setup the UDP port"

我尝试修复"模拟器，但没有任何改变.

I tried "reparing" emulators, but nothing changed.

Hyper-V 管理器显示虚拟机工作正常，可以直接从 Hyper-V 管理器启动.正如我所说，在以前的 Windows 10 TP 版本中它是可以的.

Hyper-V manager shows that virtual machine works, and it can be started directly from Hyper-V manager. As i said, in previous windows 10 TP builds it was OK.

推荐答案

您是否在控制面板网络和 Internet网络连接下看到您的虚拟交换机"信息?如果没有，您可以尝试从 Hyper-V 再次重新创建Windows Phone Emulator Internal Switch"，看看是否能解决您的问题.请尝试以下步骤:

Do you see your "Virtual Switch" information under: Control PanelNetwork and InternetNetwork Connections? If not, you can try to recreate your "Windows Phone Emulator Internal Switch" again from Hyper-V to see if that resolves your issue. Try these steps below:

1.) 打开 Hyper-V

1.) Open Hyper-V

2.) 关闭任何现有的已配置电话模拟器.

2.) Shutdown any existing configured Phone emulators.

3.) 点击虚拟交换机管理器"

3.) Click on "Virtual Switch Manager"

4.) 点击Windows Phone Emulator Internal Switch"

4.) Click on the "Windows Phone Emulator Internal Switch"

5.) 记住那里显示的设置(因为您将删除它并重新创建它)

5.) Remember what the settings are displayed there (because you will delete it and recreate it)

6.) 通过单击删除"删除现有的Windows Phone 模拟器内部开关"

6.) Delete the existing "Windows Phone Emulator Internal Switch" by clicking "Remove"

7.) 点击应用"和确定"

7.) Click "Apply" and "OK"

8.) 通过单击新建虚拟网络交换机"重新创建Windows Phone 模拟器内部交换机"，并使用您在第 5 步中记住的相同设置.

8.) Re-create the "Windows Phone Emulator Internal Switch" by clicking the "New virtual network switch" and use the same settings you remembered in Step 5.

9.) 然后尝试从 Visual Studio F5 - 这应该在正确的虚拟交换机上配置一个新的模拟器.

9.) Then try to F5 from Visual Studio - which should configure a new emulator on the right virtual switch.

这篇关于Windows Phone 模拟器无法启动(无法设置 UDP 端口)的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！