加载2个版本的运行时 [英] Loading 2 versions of runtime
问题描述
我有使用mde'的A97运行时设置的计算机。完美的工作。
我在2003年编写了一个应用程序并购买了开发者扩展程序。
当我在计算机上加载A2003运行时的应用程序时有A97
运行时，我无法打开A 97 mde'。
我的印象是开发者extensionsl允许
在计算机上同时拥有两个运行时。
1.首先加载A97运行时
2. A2003运行时加载第二。
我已经在没有A97的计算机上测试了运行模式下的a2003 mde，并且
它完美无缺。
有什么我可以做的吗两个运行时版本都运行在一台带有两个不同mde'的
计算机上？
任何建议都非常感谢。
问候，
Lar
I have computers setup with A97 runtime with mde''s. Work perfectly.
I''ve written an app in 2003 and purchased the Developer extensions.
When I load A2003 runtime with my app on a computer that has A97
runtime, I cannot open the A 97 mde''s.
I was under the impression that the developer extensionsl allow for
having both runtimes on a computer.
1. A97 Runtime loaded first
2. A2003 runtime loaded second.
I''ve tested the a2003 mde in runtime mode on computer without A97 and
it works perfectly.
Is there anything I can do to have both runtime versions run on one
computer with two different mde''s?
Any advise is greatly appreciated.
Regards,
Lar
推荐答案
2个版本的Access不存在在同一个操作系统上，你要做到这一点的唯一方法是使用双 - 启动电脑。 2
版本的Access的DLL完全不同，并且不会互相交换
。
larpup写道：
2 versions of Access can not exist on the same O/S, the only way you''re
going to do that is with a dual-boot computer. The DLLs for the 2
versions of Access are completely different and will not interract with
each other.
larpup wrote:
我有使用mde'的A97运行时设置的计算机。完美的工作。
我在2003年编写了一个应用程序并购买了开发者扩展程序。
当我在计算机上加载A2003运行时的应用程序时有A97
运行时，我无法打开A 97 mde'。
我的印象是开发者extensionsl允许
在计算机上同时拥有两个运行时。
1.首先加载A97运行时
2. A2003运行时加载第二。
我已经在没有A97的计算机上测试了运行模式下的a2003 mde，并且
它完美无缺。
有什么我可以做的吗两个运行时版本都运行在一台带有两个不同mde'的
计算机上？
任何建议都非常感谢。
问候，
Lar
I have computers setup with A97 runtime with mde''s. Work perfectly.
I''ve written an app in 2003 and purchased the Developer extensions.
When I load A2003 runtime with my app on a computer that has A97
runtime, I cannot open the A 97 mde''s.
I was under the impression that the developer extensionsl allow for
having both runtimes on a computer.
1. A97 Runtime loaded first
2. A2003 runtime loaded second.
I''ve tested the a2003 mde in runtime mode on computer without A97 and
it works perfectly.
Is there anything I can do to have both runtime versions run on one
computer with two different mde''s?
Any advise is greatly appreciated.
Regards,
Lar
ManningFan scris：
ManningFan a scris:
2个版本的Access不能存在于同一个O / S上，唯一的w你要用双启动电脑来实现这个目标。 2
版本的Access的DLL完全不同，并且不会互相交换
。
larpup写道：
2 versions of Access can not exist on the same O/S, the only way you''re
going to do that is with a dual-boot computer. The DLLs for the 2
versions of Access are completely different and will not interract with
each other.
larpup wrote:
我有使用mde'的A97运行时设置的计算机。完美的工作。
我在2003年编写了一个应用程序并购买了开发者扩展程序。
当我在计算机上加载A2003运行时的应用程序时有A97
运行时，我无法打开A 97 mde'。
我的印象是开发者extensionsl允许
在计算机上同时拥有两个运行时。
1.首先加载A97运行时
2. A2003运行时加载第二。
我已经在没有A97的计算机上测试了运行模式下的a2003 mde，并且
它完美无缺。
有什么我可以做的吗两个运行时版本都运行在一台带有两个不同mde'的
计算机上？
任何建议都非常感谢。
问候，
Lar
I have computers setup with A97 runtime with mde''s. Work perfectly.
I''ve written an app in 2003 and purchased the Developer extensions.
When I load A2003 runtime with my app on a computer that has A97
runtime, I cannot open the A 97 mde''s.
I was under the impression that the developer extensionsl allow for
having both runtimes on a computer.
1. A97 Runtime loaded first
2. A2003 runtime loaded second.
I''ve tested the a2003 mde in runtime mode on computer without A97 and
it works perfectly.
Is there anything I can do to have both runtime versions run on one
computer with two different mde''s?
Any advise is greatly appreciated.
Regards,
Lar
错误！
你可以在同一个盒子上有两个版本（或更多）的运行时，在
相同的操作系统上。
只需确保每个快捷方式的msaccess路径指向
右''msaccess.exe''，当然您已将它们安装在不同的
文件夹中。
示例：
''" C：\Program Files \ Microsoft Office \ Art \ OfficeO \ msaccess.exe"
" c：\ MyXP_DB.mde" ''对于Access XP .mde或.mdb文件和
''" C：\ MyProgram\Runtime\Office\msaccess.exe" " C：\My97_DB.mde" ''for
访问97 .mde或.mdb文件。
其他版本的运行时（A2k，A2k3）或其他版本同样适用于
运行时组合。
干杯！
塞巴斯蒂安
False!
You can have two versions (or more) of runtime on the same box, on the
same OS.
Just make sure that the path to msaccess for each shortcut point to the
right ''msaccess.exe'' and of course you have installed them in different
folders.
Example:
'' "C:\Program Files\Microsoft Office\Art\Office10\msaccess.exe "
"c:\MyXP_DB.mde" '' for Access XP .mde or .mdb file and
'' "C:\MyProgram\Runtime\Office\msaccess.exe " "c:\My97_DB.mde" '' for
Access 97 .mde or .mdb file.
The same goes for other versions of runtime (A2k, A2k3) or for other
combinations of runtime.
Cheers!
Sebastian
ManningFan scris：
ManningFan a scris:
两个版本的Access不能存在于同一个操作系统上，这是你唯一的方式>
要做的就是使用双启动计算机。 2
版本的Access的DLL完全不同，并且不会互相交换
。
larpup写道：
2 versions of Access can not exist on the same O/S, the only way you''re
going to do that is with a dual-boot computer. The DLLs for the 2
versions of Access are completely different and will not interract with
each other.
larpup wrote:
我有使用mde'的A97运行时设置的计算机。完美的工作。
我在2003年编写了一个应用程序并购买了开发者扩展程序。
当我在计算机上加载A2003运行时的应用程序时有A97
运行时，我无法打开A 97 mde'。
我的印象是开发者extensionsl允许
在计算机上同时拥有两个运行时。
1.首先加载A97运行时
2. A2003运行时加载第二。
我已经在没有A97的计算机上测试了运行模式下的a2003 mde，并且
它完美无缺。
有什么我可以做的吗两个运行时版本都运行在一台带有两个不同mde'的
计算机上？
任何建议都非常感谢。
问候，
Lar
I have computers setup with A97 runtime with mde''s. Work perfectly.
I''ve written an app in 2003 and purchased the Developer extensions.
When I load A2003 runtime with my app on a computer that has A97
runtime, I cannot open the A 97 mde''s.
I was under the impression that the developer extensionsl allow for
having both runtimes on a computer.
1. A97 Runtime loaded first
2. A2003 runtime loaded second.
I''ve tested the a2003 mde in runtime mode on computer without A97 and
it works perfectly.
Is there anything I can do to have both runtime versions run on one
computer with two different mde''s?
Any advise is greatly appreciated.
Regards,
Lar
错误！
你可以在同一个盒子上有两个版本（或更多）的运行时，在
相同的操作系统上。
只需确保每个快捷方式的msaccess路径指向
右''msaccess.exe''，当然您已将它们安装在不同的
文件夹中。
示例：
''" C：\Program Files \ Microsoft Office \ Art \ OfficeO \ msaccess.exe"
" c：\ MyXP_DB.mde" ''对于Access XP .mde或.mdb文件和
''" C：\ MyProgram\Runtime\Office\msaccess.exe" " C：\My97_DB.mde" ''for
访问97 .mde或.mdb文件。
其他版本的运行时（A2k，A2k3）或其他版本同样适用于
运行时组合。
干杯！
塞巴斯蒂安
False!
You can have two versions (or more) of runtime on the same box, on the
same OS.
Just make sure that the path to msaccess for each shortcut point to the
right ''msaccess.exe'' and of course you have installed them in different
folders.
Example:
'' "C:\Program Files\Microsoft Office\Art\Office10\msaccess.exe "
"c:\MyXP_DB.mde" '' for Access XP .mde or .mdb file and
'' "C:\MyProgram\Runtime\Office\msaccess.exe " "c:\My97_DB.mde" '' for
Access 97 .mde or .mdb file.
The same goes for other versions of runtime (A2k, A2k3) or for other
combinations of runtime.
Cheers!
Sebastian
这篇关于加载2个版本的运行时的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
