有没有办法以编程方式找出封闭报告的宽度？ [英] Is there any way to find out the width of a closed report programatically?
问题描述
我只是试图获取所有报告的列表及其
宽度。
我不能使用报告 ;集合，因为它只适用于打开
报告。所以我试着查看AllReports。收藏和它
似乎没有什么用处...只允许你找出每个报告的名称
。
" ry ********** @ yahoo.com" < ry ********** @ yahoo.comwrote in
新闻：11 ********************* *@i3g2000cwc.googlegro ups.com：
我只想获取所有报告的列表以及
的宽度。
我不能使用报告收集，因为它只适用于
打开报告。所以我试着查看AllReports
集合，它似乎没有任何用处...只允许
你找出每个的名字报告。
打开报告，获取宽度并再次关闭。
-
Bob Quintal
PA是我改变了我的电子邮件地址。
-
通过 http://www.teranews.com 上的免费Usenet帐户发布
警告：不要使用Ultimate-Anonymity
他们是没有价值的垃圾邮件发送者，他们正在运行诈骗。
Bob Quintal写道：
" ry ********** @ yahoo.com" < ry ********** @ yahoo.comwrote in
新闻：11 ********************* *@i3g2000cwc.googlegro ups.com：
我只想获取所有报告的列表以及
的宽度。
我不能使用报告收集，因为它只适用于
打开报告。所以我试着查看AllReports
集合，它似乎没有任何用处...只允许
你找出每个的名字报告。
打开报告，获取宽度并再次关闭。
-
Bob Quintal
PA是我改变了我的电子邮件地址。
-
发表于来自 http://www.teranews.com 的免费Usenet帐户
警告：不要使用Ultimate-Anonymity
他们是无价值的垃圾邮件发送者，他们正在运行诈骗。
谢谢，鲍勃！
但实际上已经太晚了。我已经得到了另一个guru的答案
其他地方...
原来在Access中获取已关闭报告的宽度（这就是我试图做的事情，我所要做的就是打开报告。然后我可以获得宽度的
！那时我所要做的就是关闭报告并且
假装它一直关闭。我用这种方式愚弄自己这个方式，但是，因为我跟随大师建议我感觉很好......
这让我倍加愚蠢;但还是感觉还不错！
天才，呵呵？
但它变得更好了！如果你还记得（或者你不想？），
我正在试图获得所有报告的宽度。并且有很多
他们 - 因此这样做的想法是不打开每一个 - 所以这样做
这种方式需要很长时间，但每次重复我感觉更多，并且更加欣慰。
Supercalifragilistic！
嗯？
嗯，你知道吗，我打算发布一些代码来帮助你完成这项任务
但我不知道我不知道我是否能忍受你那令人眼花缭乱的机智和讽刺，
试图帮助你的人，所以我不会。
不要绝望，有数百万人在那里有善意
你可以利用然后滥用它们来解决他们的麻烦。
-
Terry Kreft
< ry ********** @ yahoo.comwrote in message
news：11 ********************** @ h48g2000cwc.googlegr oups.com ...
Bob Quintal写道：
" ry ********** @ yahoo.com" < ry ********** @ yahoo.comwrote in
新闻：11 ********************* *@i3g2000cwc.googlegro ups.com：
我只想获取所有报告的列表以及
的宽度。
>
我不能使用报告收集，因为它只适用于
打开报告。所以我试着查看AllReports
集合，它似乎没有任何用处...只允许
你找出每个的名字报告。
>
打开报告，获取宽度并再次关闭。
-
Bob Quintal
PA是我改变了我的电子邮件地址。
-
发表于来自 http://www.teranews.com 的免费Usenet帐户
警告：不要使用Ultimate-Anonymity
他们是无价值的垃圾邮件发送者，他们正在运行诈骗。
谢谢，鲍勃！
但实际上已经太迟了。我已经得到了另一个guru的答案
其他地方...
原来在Access中获取已关闭报告的宽度（这就是我试图做的事情，我所要做的就是打开报告。然后我可以获得宽度的
！那时我所要做的就是关闭报告并且
假装它一直关闭。我用这种方式愚弄自己这个方式，但是，因为我跟随大师建议我感觉很好......
这让我倍加愚蠢;但还是感觉还不错！
天才，呵呵？
但它变得更好了！如果你还记得（或者你不想？），
我正在试图获得所有报告的宽度。并且有很多
他们 - 因此这样做的想法是不打开每一个 - 所以这样做
这种方式需要很长时间，但每次重复我感觉更多，并且更加欣慰。
Supercalifragilistic！
嗯？
I was just trying to get a list of all my reports along with their
widths.
I can''t use the "Reports" collection because it only works on open
reports. So I tried looking into the "AllReports" collection and it
doesn''t seem any more useful... only allows you to find out the name of
each report.
"ry**********@yahoo.com" <ry**********@yahoo.comwrote in
news:11**********************@i3g2000cwc.googlegro ups.com:
I was just trying to get a list of all my reports along with
their widths.
I can''t use the "Reports" collection because it only works on
open reports. So I tried looking into the "AllReports"
collection and it doesn''t seem any more useful... only allows
you to find out the name of each report.
Open the report, get the width and close it again.
--
Bob Quintal
PA is y I''ve altered my email address.
--
Posted via a free Usenet account from http://www.teranews.com
Warning: Do not use Ultimate-Anonymity
They are worthless spammers that are running a scam.
Bob Quintal wrote:"ry**********@yahoo.com" <ry**********@yahoo.comwrote in
news:11**********************@i3g2000cwc.googlegro ups.com:
I was just trying to get a list of all my reports along with
their widths.
I can''t use the "Reports" collection because it only works on
open reports. So I tried looking into the "AllReports"
collection and it doesn''t seem any more useful... only allows
you to find out the name of each report.Open the report, get the width and close it again.
--
Bob Quintal
PA is y I''ve altered my email address.
--
Posted via a free Usenet account from http://www.teranews.com
Warning: Do not use Ultimate-Anonymity
They are worthless spammers that are running a scam.Thanks, Bob!
But too late, actually. I''d already gotten answer from another "guru"
elsewhere...
Turns out to get the width of a closed report in Access (which is what
I was trying to do), all I have to do is open the report. Then I can
get the width! All I have to do at that point is close the report and
pretend it was closed the whole time. I make a fool out of myself this
way, but, since I am following "guru" advice I feel great about it...
which makes me doubly foolish; but still feeling fine!
Genius, huh?
It gets even better, though! If you''ll recall (or maybe you won''t?),
I''m trying to get the widths of all my reports. And there are a lot of
them - thus the idea to do it without opening each one -- so doing it
this way takes a long time, but with each reiteration I feel more and
more euphoric.
Supercalifragilistic!
Huh?
Well, you know what, I was going to post some code to help you in this task
but I don''t know if I could stand the dazzling wit and sarcasm you throw at
people who try to help you, so I won''t.
Don''t despair though, there are millions of people out there who''s goodwill
you can take advantage of and then abuse them for their trouble.
--
Terry Kreft
<ry**********@yahoo.comwrote in message
news:11**********************@h48g2000cwc.googlegr oups.com...Bob Quintal wrote:"ry**********@yahoo.com" <ry**********@yahoo.comwrote in
news:11**********************@i3g2000cwc.googlegro ups.com:
I was just trying to get a list of all my reports along with
their widths.
>
I can''t use the "Reports" collection because it only works on
open reports. So I tried looking into the "AllReports"
collection and it doesn''t seem any more useful... only allows
you to find out the name of each report.
>Open the report, get the width and close it again.
--
Bob Quintal
PA is y I''ve altered my email address.
--
Posted via a free Usenet account from http://www.teranews.com
Warning: Do not use Ultimate-Anonymity
They are worthless spammers that are running a scam.
Thanks, Bob!
But too late, actually. I''d already gotten answer from another "guru"
elsewhere...
Turns out to get the width of a closed report in Access (which is what
I was trying to do), all I have to do is open the report. Then I can
get the width! All I have to do at that point is close the report and
pretend it was closed the whole time. I make a fool out of myself this
way, but, since I am following "guru" advice I feel great about it...
which makes me doubly foolish; but still feeling fine!
Genius, huh?
It gets even better, though! If you''ll recall (or maybe you won''t?),
I''m trying to get the widths of all my reports. And there are a lot of
them - thus the idea to do it without opening each one -- so doing it
this way takes a long time, but with each reiteration I feel more and
more euphoric.
Supercalifragilistic!
Huh?
这篇关于有没有办法以编程方式找出封闭报告的宽度？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
