重要！ 2.0登录控制没有取消按钮 [英] IMPORTANT! 2.0 Login Control Has No Cancel Button
问题描述
这是对发送给微软的同行支持的吸引力，将在
结束时注明。
登录控件不包含取消按钮。
唯一的选择是将Login控件转换为一个模板，而不是
本身就是一件坏事但它意味着
应用程序也必须转换为模板以保持一致的UI。
当愚蠢的蠢货发布控件时，编写70％的代码就这么多了
没有取消按钮。
因此，如果不负责任地执行自己而不是简单的婊子我发布
这个问题作为MSDN产品反馈的错误，他们的回复如下。 ..
由Microsoft于2005-08-31 12:14:05关闭
感谢您提交此问题。在Whidbey产品的这个阶段，我们对产品进行了很少的改动。我们已经对此问题进行了评估
，并且在发布之前无法对其进行调查，但我们将在未来的某个日期重新考虑下一版本的产品。为了帮助我们更好地评估这个问题，如果您要发送电子邮件
到我们****** @ microsoft.com ，主题行中包含此问题的FDBK ID
所以我们可以在以后联系您，如有必要。有关详细信息，请参阅
请参阅MSDN产品反馈中心的公告
http://lab.msdn.com/productfeedback 。
所以，我问所有考虑使用2.0的人写我们****** @ microsoft.com
使用错误ID：FDBK35347作为主题并给予他们地狱和要求
这个问题在RTM之前解决，除非你想浪费你所有的时间
编写和修改HTML以及所有事件所需的过多编码
您的控件已经转换为每个
应用程序中的模板，直到ASP.NET的下一个版本，因为一些愚蠢的
moron决定登录按钮不需要取消按钮。
<％=克林顿加拉格尔
METROmilwaukee（sm）区域信息服务
NET csgallagher AT metromilwaukee.com
URL http://metromilwaukee.com/
URL http://clintongallagher.metromilwaukee.com/
This is an appeal for peer support sent to Microsoft as will be noted in
closing.
The Login control does not include a Cancel button.
The only option is to convert the Login control to a template which is not
such a bad thing in itself but it means all other controls in the
application must also be converted to templates to maintain a consistent UI.
So much for writing 70% less code when foolish morons release a control with
no cancel button.
So rather than simpy bitch without conducting myself responsibly I posted
the issue as a bug to MSDN Product Feedback and their reply follows...
Closed by Microsoft on 2005-08-31 at 12:14:05
Thank you for submitting this issue. At this stage in the Whidbey product
cycle, we''re taking very few changes into the product. We have evaluated
this issue and will not be able to investigate it before release but we?ll
reconsider it for the next version of the product at a future date. To help
us better evaluate this issue, we would appreciate if you would send email
to we******@microsoft.com with the FDBK ID of this issue in the subject line
so we can contact you later, if necessary. For more information, please
refer to the announcement on the MSDN Product Feedback center at
http://lab.msdn.com/productfeedback.
So, I ask all that are considering using 2.0 to write we******@microsoft.com
using Bug ID: FDBK35347 as the subject and give them hell and demand that
this issue be resolved before RTM unless you want to waste all of your time
writing and modifying HTML and excessive coding required for events in all
of your controls that have been converted to templates in every one of your
applications until the next release of ASP.NET simply because some foolish
moron decided the Login button does not require a Cancel button.
<%= Clinton Gallagher
METROmilwaukee (sm) "A Regional Information Service"
NET csgallagher AT metromilwaukee.com
URL http://metromilwaukee.com/
URL http://clintongallagher.metromilwaukee.com/
推荐答案
clintonG写道：
clintonG wrote:
所以，我问所有人正在考虑使用2.0使用错误ID来编写 we******@microsoft.com ： FDBK35347作为主题和
给他们地狱并要求在RTM之前解决这个问题
除非你想浪费你所有的时间来编写和修改HTML
和所有事件所需的过多编码您的控件已经转换为每个应用程序中的模板
直到ASP.NET的下一个版本只是因为一些愚蠢的白痴
决定了Login按钮没有需要一个取消按钮。
So, I ask all that are considering using 2.0 to write
we******@microsoft.com using Bug ID: FDBK35347 as the subject and
give them hell and demand that this issue be resolved before RTM
unless you want to waste all of your time writing and modifying HTML
and excessive coding required for events in all of your controls that
have been converted to templates in every one of your applications
until the next release of ASP.NET simply because some foolish moron
decided the Login button does not require a Cancel button.
克林顿，
在RTM之前不可能添加这个期。 2.0是
功能锁定。他们不打算添加这个功能，因为它创造了回归的机会。如果您曾经发过软件，那么您将会理解这一点。
就我个人而言，我认为微软很快就会为您提供
a方式提供您的信息，以便您以后联系。
-
Jim Cheshire
JIMCO Software
http://www.jimcosoftware.com
FrontPage 2000的FrontPage加载项 - 2003
Clinton,
There''s no way this is going to be added before RTM period. 2.0 is in
feature lockdown. They''re not going to add this feature because it creates
an opportunity for regression. If you''ve ever shipped software, you''ll
understand that.
Personally I think it was pretty responsive of Microsoft to provide you with
a way to give your information so that you can be contacted later.
--
Jim Cheshire
JIMCO Software
http://www.jimcosoftware.com
FrontPage add-ins for FrontPage 2000 - 2003
clintonG写道：
clintonG wrote:
这是对发送给微软的同行支持的吸引力，将在
结束时注明。
登录控件不包括取消按钮。
你期望取消按钮做什么？您想要的行为是否是人们期望的唯一行为，或者是否存在各种各样的行为？还没有玩过这个功能，是否有可能
将登录控件放在正常页面上供应正常内容
（在这种情况下取消没有意义）？
唯一的选择是将Login控件转换为一个模板本身并不是一件坏事，但这意味着
应用程序中的所有其他控件也必须转换模板以保持一致的UI。
当愚蠢的白痴发布一个没有取消按钮的控件时，编写70％的代码就这么多了。
所以不要在没有指导的情况下吝啬婊子我自己负责任地将这个问题作为MSDN产品反馈的错误发布了，他们的回复如下......
微软于2005-08-31 12:14:05关闭
感谢您提交此问题。在Whidbey产品周期的这个阶段，我们对产品进行了很少的更改。我们已经评估了这个问题，并且在发布之前无法对其进行调查，但我们将在未来的日期重新考虑下一版本的产品。为帮助我们更好地评估此问题，如果您要发送电子邮件
到我们****，我们将不胜感激。 **@microsoft.com ，主题行中包含此问题的FDBK ID
因此，如有必要，我们可以在以后与您联系。有关详细信息，请参阅MSDN产品反馈中心上的公告
http://lab.msdn.com/productfeedback 。
所以，我问所有考虑使用2.0编写我们****** @ microsoft.com
使用Bug ID：FDBK35347作为主题并给他们地狱并要求
这个问题得到解决在RTM之前，除非您想浪费所有时间来编写和修改HTML以及所有控件中所需的过多编码，这些控件已在每个
应用程序中转换为模板直到ASP.NET的下一个版本，因为一些愚蠢的白痴决定登录按钮不需要取消按钮。
<％= Clinton Gallagher
METROmilwaukee（sm） 区域信息服务
NET csgallagher AT metromilwaukee.c om
URL http://metromilwaukee.com/
URL http://clintongallagher.metromilwaukee.com/
This is an appeal for peer support sent to Microsoft as will be noted in
closing.
The Login control does not include a Cancel button.
What do you expect the Cancel button to do? Is the behaviour you want
the only behaviour that one would expect, or are there various
possibilities? Not having played with this feature yet, is it possible
to have the login control on a normal page which serves normal content
(in which case Cancel makes no sense)?
The only option is to convert the Login control to a template which is not
such a bad thing in itself but it means all other controls in the
application must also be converted to templates to maintain a consistent UI.
So much for writing 70% less code when foolish morons release a control with
no cancel button.
So rather than simpy bitch without conducting myself responsibly I posted
the issue as a bug to MSDN Product Feedback and their reply follows...
Closed by Microsoft on 2005-08-31 at 12:14:05
Thank you for submitting this issue. At this stage in the Whidbey product
cycle, we''re taking very few changes into the product. We have evaluated
this issue and will not be able to investigate it before release but we''ll
reconsider it for the next version of the product at a future date. To help
us better evaluate this issue, we would appreciate if you would send email
to we******@microsoft.com with the FDBK ID of this issue in the subject line
so we can contact you later, if necessary. For more information, please
refer to the announcement on the MSDN Product Feedback center at
http://lab.msdn.com/productfeedback.
So, I ask all that are considering using 2.0 to write we******@microsoft.com
using Bug ID: FDBK35347 as the subject and give them hell and demand that
this issue be resolved before RTM unless you want to waste all of your time
writing and modifying HTML and excessive coding required for events in all
of your controls that have been converted to templates in every one of your
applications until the next release of ASP.NET simply because some foolish
moron decided the Login button does not require a Cancel button.
<%= Clinton Gallagher
METROmilwaukee (sm) "A Regional Information Service"
NET csgallagher AT metromilwaukee.com
URL http://metromilwaukee.com/
URL http://clintongallagher.metromilwaukee.com/
至于我能够确定Login控件是唯一一个
在这方面是FUBAR的控件。缺少取消按钮需要使用
浏览器的后退按钮来关闭登录。这打破了可访问性。
这也意味着开发人员无法直接访问取消事件，因此需要编写所有
种额外代码。
此外，正如我所说，添加我们自己的取消按钮的唯一方法是将
转换为Login控件到模板。这样做会破坏
所有其他控件（包括取消按钮）的一致性。一切看起来和
感觉不同。统一应用程序的唯一方法是将整个应用程序中的每个控件转换为模板。
当控件转换为模板时我们得到的是一堆HTML，必须修改
。开发人员必须像1.1中那样编写他或她自己的事件
处理程序，这意味着因为某些愚蠢的@sshole没有支付
或者不能正常工作在登录中包含一个取消按钮
控件已经使微软所说的所有内容都需要写下更少的b / B
代码。
请写下电子邮件地址并要求在产品发货之前解决此问题。
<％= Clinton Gallagher
METROmilwaukee（sm）区域信息服务
NET csgallagher AT metromilwaukee.com
URL http://metromilwaukee.com/
URL http://clintongallagher.metromilwaukee.com/
" Damien" <沓******************* @ hotmail.com>在消息中写道
news：11 ********************** @ o13g2000cwo.googlegr oups.com ...
As far as I''ve been able to determine the Login control is the only one that
has been FUBAR in this regard. A missing Cancel button requires the use of
the browser''s back button to dismiss the Login. That breaks accessibility.
It also means developers have no direct access to the cancel event so all
kinds of extra code needs to be written.
Furthermore as I''ve stated, the only way to add our own Cancel button is to
convert the Login control to a template. Doing so breaks the consistency of
all other controls which include the Cancel button. Everything looks and
feels different. The only way to unify the application requires converting
each and every control in the entire application to a template.
When a control is converted to a template all we get is a bunch of HTML that
must be modified. The developer has to write all of his or her own event
handlers just like in 1.1 meaning because some stupid @sshole that did not
or would not do his job right and include a Cancel button in the Login
control has made everything Microsoft has said about the need to write less
code a BIG FAT LIE.
Please write the e-mail address and ask for this issue to be resolved before
the product is shipped.
<%= Clinton Gallagher
METROmilwaukee (sm) "A Regional Information Service"
NET csgallagher AT metromilwaukee.com
URL http://metromilwaukee.com/
URL http://clintongallagher.metromilwaukee.com/
"Damien" <Da*******************@hotmail.com> wrote in message
news:11**********************@o13g2000cwo.googlegr oups.com...
clintonG写道：
clintonG wrote:
这是对发送给微软的同伴支持的呼吁，将在
结束时注明。
登录控件不包括一个取消按钮。
This is an appeal for peer support sent to Microsoft as will be noted in
closing.
The Login control does not include a Cancel button.
你期望取消按钮做什么？您想要的行为是您期望的唯一行为，还是存在各种各样的可能性？还没有玩过这个功能，是否可以将登录控件放在普通内容的普通页面上（在这种情况下取消没有意义）？
What do you expect the Cancel button to do? Is the behaviour you want
the only behaviour that one would expect, or are there various
possibilities? Not having played with this feature yet, is it possible
to have the login control on a normal page which serves normal content
(in which case Cancel makes no sense)?
唯一的选择是将Login控件转换为一个模板，这个模板本身并不是一件坏事，但这意味着
应用程序中的所有其他控件也必须转换模板以保持一致的UI。
当愚蠢的白痴释放控件时，编写的代码减少了70％
没有取消按钮。
因此，如果没有负责任地执行自己而不是简单的婊子，我发布了这个问题作为MSDN产品反馈的错误，他们的回复如下......
由Microsoft在2005-08-31关闭12:14:05
感谢您提交此问题。在Whidbey产品周期的这个阶段，我们对产品进行了很少的更改。我们已经对此问题进行了评估，并且在发布之前无法对其进行调查，但是我们将在未来的日期重新考虑该产品的下一版本。为了帮助我们更好地评估这个问题，如果您发送
电子邮件
到我们****** @ microsoft.com 这个问题的FDBK ID在主题
行中
所以我们可以在以后联系你，如有必要。有关详细信息，请参阅MSDN产品反馈中心上的公告
http://lab.msdn.com/productfeedback 。
所以，我要求所有考虑使用2.0的人写一下
我们****** @ microsoft.com
使用Bug ID：FDBK35347作为主题并给他们地狱和要求
这个问题在RTM之前解决，除非你想浪费所有的时间来编写和修改HTML以及
所有
控件中所需的过多编码已经转换为每个
你的
应用程序的模板，直到ASP.NET的下一个版本只是因为一些愚蠢的白痴决定登录按钮不需要取消按钮。
<％=克林顿加拉格尔
METROmilwaukee（sm）区域信息服务
NET csgallagher AT metromilwaukee.com
URL http://metromilwaukee.com/
URL http://clintongallagher.metromilwaukee.com/
The only option is to convert the Login control to a template which is
not
such a bad thing in itself but it means all other controls in the
application must also be converted to templates to maintain a consistent
UI.
So much for writing 70% less code when foolish morons release a control
with
no cancel button.
So rather than simpy bitch without conducting myself responsibly I posted
the issue as a bug to MSDN Product Feedback and their reply follows...
Closed by Microsoft on 2005-08-31 at 12:14:05
Thank you for submitting this issue. At this stage in the Whidbey product
cycle, we''re taking very few changes into the product. We have evaluated
this issue and will not be able to investigate it before release but
we''ll
reconsider it for the next version of the product at a future date. To
help
us better evaluate this issue, we would appreciate if you would send
to we******@microsoft.com with the FDBK ID of this issue in the subject
line
so we can contact you later, if necessary. For more information, please
refer to the announcement on the MSDN Product Feedback center at
http://lab.msdn.com/productfeedback.
So, I ask all that are considering using 2.0 to write
we******@microsoft.com
using Bug ID: FDBK35347 as the subject and give them hell and demand
that
this issue be resolved before RTM unless you want to waste all of your
time
writing and modifying HTML and excessive coding required for events in
all
of your controls that have been converted to templates in every one of
your
applications until the next release of ASP.NET simply because some
foolish
moron decided the Login button does not require a Cancel button.
<%= Clinton Gallagher
METROmilwaukee (sm) "A Regional Information Service"
NET csgallagher AT metromilwaukee.com
URL http://metromilwaukee.com/
URL http://clintongallagher.metromilwaukee.com/
这篇关于重要！ 2.0登录控制没有取消按钮的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
