如何通过USB端口发送C程序 [英] how to send a C program through usb port

问题描述

我的任务是用C编写程序，然后我必须通过USB端口将它发送到微控制器。我用C完成了一个程序，问题是我不知道如何通过USB端口将它发送到微控制器。

有些人可以帮助我。

这是紧急的，因为我必须在本周末交付

谢谢

My assignment is to write a program in C, then i have to send it to a microcontroller through usb port. I have finished a program in C, the problem is that i don''t know how to send it to microcontroller through USB port.
Can some of you please help me.
It is urgent coz i have to hand it at the end of this week
thanks

推荐答案

什么样的微控制器？

什么样的微控制器？

what kind of microcontroler?

pic18f4550

pic18f4550

pic18f4550

pic18f4550

除非您的目标板有一个板载编程器，否则您将需要一个编程器，如Microchip的ICD2

http://www.microchip.com/stellent/idcplg?IdcService = SS_GET_PAGE& nodeId = 1406& dDocName = en010046& part = DV164005

如果您使用的是Microchip的MPLAB开发环境

http：// www .microchip.com / stellent / idcplg？IdcService = SS_GET_PAGE& nodeId = 1406& dDocName = en019469& part = SW007002


单击主菜单上的Programmer，然后选择Programmer，然后编程（例如MPLAB ICD 2） - MPLAB应连接到编程器并检查器件ID，如果确定，可以通过单击Program

unless your target board has an onboard programmer you will need a programmer such as Microchip''s ICD2
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName =en010046&part=DV164005

If you are using Microchip''s MPLAB development environment
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName =en019469&part=SW007002

click Programmer on the main menu, then Select Programmer, then your programmer (such as MPLAB ICD 2) - MPLAB should connect to the programmer and check the device ID, if OK you can program the device by clicking Program

这篇关于如何通过USB端口发送C程序的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！