标签11垂直问题 [英] Labels 11 Vertical Issue
问题描述
嗨：
我有一个用户，其标签设置为3个横向和11个垂直（这是不寻常的
最佳），以及他希望我在上面打印姓名和地址。我已经设置了
标签10垂直和3横（Avery 5160），这是用户的另一个标准，但
在设置中找不到任何标签对于显示11垂直的标签。因此，我使用
Avery 5160作为开始，并修改顶部和底部边距（11
垂直边距在顶部和底部为.079） 。使用页面设置对于我有的标签
将最高保证金减少到.079，但是BOTTOM保证金拒绝接受.079并且一直将
恢复到0.46。有没有人建议如何：（a）将
底部边距减少到0.079或（b）通过其他方式获得11垂直？
提前致谢
John Baker
Hi:
I have a user who has labels that are set up 3 across and 11 vertical (which is unusual at
best), and he wants me to print names and addresses on them. I have already set up for
labels 10 vertical and 3 across (Avery 5160)which are another standard the user has, but
can''t find any in the setup for labels that show 11 vertical. I am therefore using the
Avery 5160 as a start, and modifying the top and bottom margins (the margins on the 11
vertical are .079 at the top and bottom). Using the "Page Setup" for the labels I have
reduced the top margin to .079, but the BOTTOM margin refuses to accept .079 and reverts
to 0.46 all the time. Does anyone have a suggestion as to how I can either: (a) reduce the
bottom margin to 0.079 OR (b) get 11 vertical by some other means?
Thanks in advance
John Baker
推荐答案
大多数打印机对保证金的限制有限制。你可以
必须使用不同的打印机，以便能够充分减少边际
。
-
Doug Steele，Microsoft Access MVP
http://I.Am / DougSteele
（请不要发电子邮件！）
" John Baker" <巴****** @ Verizon.net>在消息中写道
新闻：lm ******************************** @ 4ax.com ...
Most printers have a limitation as to how small the margin can be. You may
have to use a different printer in order to be able to reduce the margin
sufficiently.
--
Doug Steele, Microsoft Access MVP
http://I.Am/DougSteele
(no e-mails, please!)
"John Baker" <Ba******@Verizon.net> wrote in message
news:lm********************************@4ax.com...
嗨：
我有一个用户，其标签设置为3个横向和11个垂直
（最好不寻常），以及他希望我在上面打印姓名和地址。我已经设置了
标签10垂直和3横（Avery 5160），这是
用户的另一个标准，但在设置中找不到任何显示11垂直的标签。我是
因此使用Avery 5160作为开始，并修改顶部和底部边距（11个垂直边缘的
边距在顶部和底部为.079）。使用页面设置对于
标签，我已将上限减少到.079，但是BOTTOM保证金拒绝接受
.079并且一直恢复到0.46。有没有人建议如何我可以
：（a）将底部边距减少到0.079或（b）通过其他方式获得11垂直？
提前致谢
John Baker
Hi:
I have a user who has labels that are set up 3 across and 11 vertical (which is unusual at best), and he wants me to print names and addresses on them. I have already set up for labels 10 vertical and 3 across (Avery 5160)which are another standard the user has, but can''t find any in the setup for labels that show 11 vertical. I am therefore using the Avery 5160 as a start, and modifying the top and bottom margins (the margins on the 11 vertical are .079 at the top and bottom). Using the "Page Setup" for the labels I have reduced the top margin to .079, but the BOTTOM margin refuses to accept ..079 and reverts to 0.46 all the time. Does anyone have a suggestion as to how I can either: (a) reduce the bottom margin to 0.079 OR (b) get 11 vertical by some other means?
Thanks in advance
John Baker
Doug：
如何找到HP 932C？
Best
John baker
" Douglas J. Steele" < NOSPAM_djsteele@NOSPAM_canada.com>写道：
Doug:
How do I find out for an HP 932C?
Best
John baker
"Douglas J. Steele" <NOSPAM_djsteele@NOSPAM_canada.com> wrote:
大多数打印机都限制了保证金的小幅度。您可能需要使用不同的打印机，以便能够充分降低利润率。
Most printers have a limitation as to how small the margin can be. You may
have to use a different printer in order to be able to reduce the margin
sufficiently.
道格：
我应该在一开始就提到我有一个用Lotus写的应用程序
方法设置打印11个向下标签，并成功地做到了。我是
为Access重写应用程序（从头开始）。因此，我不认为它是
打印机的默认设置，因为我在两个应用程序中都使用相同的打印机。
Best
John
" Douglas J. Steele" < NOSPAM_djsteele@NOSPAM_canada.com>写道：
Doug:
I should have mentioned at the outset that I have an application I wrote using Lotus
Approach which is set up to print the 11 down labels, and does so successfully. I am
rewriting that applications (from scratch) for Access. Hence, I don''t think its the
printer defaults, since I am using the same printer with both applications.
Best
John
"Douglas J. Steele" <NOSPAM_djsteele@NOSPAM_canada.com> wrote:
大多数打印机都限制了保证金的小幅度。您可能需要使用不同的打印机才能够充分降低利润率。
Most printers have a limitation as to how small the margin can be. You may
have to use a different printer in order to be able to reduce the margin
sufficiently.
这篇关于标签11垂直问题的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
