软盘问题我需要解决这个问题“帮助” [英] Floppy disk issue I need to fix this "help"

问题描述

嘿，我最近买了一本有软盘的书，我把软盘放在我的电脑里，它给了我这个错误

Hey I have recently bought a book that had a floppy disk in it and I put the floppy disk in my computer and it gives me this error

You Need to Format the Disk before You Can Use It

这是错误但是我检查了所有我的驱动程序到软盘驱动器是最新的，驱动器号设置为（a）所以问题是为什么这不能读取软盘上的数据



注意我还看到它有一个未指定的（2）软盘驱动器名称以上所以mabe这与它有关我甚至进入磁盘管理和软盘驱动器根本没有显示只有驱动器和CD驱动器显示所以是什么问题我不想格式化磁盘因为软盘上的数据所以有任何建议可以解决这个问题，我可以从软盘上获取数据....



我尝试了什么：



我试图更新驱动程序

我试过看看软盘驱动器是否显示在磁盘管理上它没有

我已经尝试更新驱动程序并且这些都是最新的

我已经尝试了一些数据恢复软件，但软盘驱动器没有显示从软盘中检索数据...

That is the error but I have checked all my drivers to the floppy drive are up to date and the drive letter is set to (a) so question is why cant this read the data on the floppy disk

Note I also seen that it has a unspecified (2) above the floppy drive name so mabe this has something to do with it I Even went onto the disk management and the floppy drive does not show up at all only the drives and cd drives show up so whats the issue I don't want to format the disk because of the data that's on the floppy disk so any advice on getting this fixed where I can get the data off of the floppy disk....

What I have tried:

I have tried to update the drivers
I have tried to see if the floppy drive shows up on disk management which it does not
I have tried updating the drivers and there all up to date
I have tried some data recovery software but the floppy drive does not show up to retrieve the data from the floppy disk...

推荐答案

有几个可能的原因 - 但是没有一个是好消息。

首先，它可能是一个对齐问题 - 轨道很窄，并且实现问题并不需要太多。尝试不同的驱动器，看看是否可以。

其次，你的驱动器有问题 - 它们被撞击，弹跳，震动 - 它们现在可能已经很老了。



但最可能的原因是：软盘很旧。很老 - 二十多年来我还没有看过一本带软盘的书！软盘死于老年：它们失去了磁性，它们受到热量，宇宙射线，附近设备的EM场的影响。机会是软盘死了作为渡渡鸟...



尝试联系出版商：他们可能 - 可能 - 以电子方式存储原件。



或者更好，请使用更现代的书 - 这些材料可能已经被取代（如果没有废弃）十五年或更长时间，所以它不太可能是有用的nodern资源。

There are a couple of possible reasons - but none of them are good news.
First, it could be an alignment problem - the tracks are narrow, and it doesn't take much to get real problems. Try a different drive and see if that does it.
Second, your drive is faulty - they get banged, bounced, shaken - and they are probably all pretty old by now.

But the most likely reason is: the floppy is old. Very old - I haven't seen a book with a floppy on it in over twenty years! Floppy disks die of old age: they lose magnetism, they get affected by heat, cosmic rays, EM fields from nearby equipment. Chances are the floppy is dead as a dodo...

Try contacting the publishers: they may - just possibly - have the original stored electronically.

Or better, go with a more modern book - that material has probably been superseded (if not obsoleted) for fifteen years or more, so it's unlikely to be a useful nodern resource.

此消息通常意味着：

- 您的操作系统不知道软盘的文件系统

- 或者此文件系统已损坏

很难判断前者或后者是否是原因，没有进一步的信息。

最有可能的是，软盘已损坏;这种存储支持已被放弃，因为它是一种不太可靠的：对磁场敏感，加热，并且随着时间的推移会发生化学不稳定。

This message usually means that:
- either the file system of the floppy disk is unknown to your operating system
- or this file system is damaged
Hard to tell whether the former or latter is the cause, without further information.
Most probably, the floppy disk is damaged; this storage support has been abandoned as it was one of the less reliable: sensitive to magnetic fields, to heat, and chemically unstable as time goes by.

这篇关于软盘问题我需要解决这个问题“帮助”的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！