覆盆子和窗户中的Mosquitto-PHP库 [英] Mosquitto-PHP library in raspberry and windows
问题描述
HI
我使用Mosquitto-PHP为MQTT安装PHP客户端
覆盆子mosquitto php库中的库/ [ ^ ]
之后创建pub。在浏览器http://210.201.4.120/mqtt/pup.php中写入/ var / www / html / mqtt中的php并且没有看到任何数据
然后我试过
$ mosquitto_pub -h localhost -t/ mqtt-mHelloWorld
和得到
bash：-h：找不到命令
我不知道问题出在哪里是，信息写入命令
$ mosquitto -v
1464002857：mosquitto版本1.4.8（建造日期星期二，2016年5月17日11:26:59 +0100）开始
1464002857：使用默认配置。
1464002857：O在端口1883上输入ipv4监听套接字。
1464002857：错误：地址已在使用
我的窗口中也有同样的问题我安装mosquitto，请看这个链接
使用Windows 7逐步安装和配置Mosquitto分享技术资料 [ ^ ]
我看到Mosquitto Broker（MQTT v3.1经纪人）的服务是runnng并检查示例pub.php进行测试
在主人的mgquitto-PHP / epub.php·mgdm / Mosquitto-PHP·GitHub [ ^ ]
结果是错误Mosquitto \Client（ ）找不到
我搜索并找到了mosquitto.php
mosquitto-stub/mosquitto.php at master·Nakard / mosquitto-stub·GitHub [ ^ ]
并把我把这段代码放在pub.php中>
需要mosquitto.php;
我不知道问题出在哪里，任何人都可以帮忙我在我的窗户和覆盆子里运行mosquitto。
我需要尝试使用php运行runnig mosquitto并且可以与localhost连接并检查连接是否可以订阅并发布和阅读消息
我尝试过：
require mosquitto.php;
$ client = new Mosquitto \Client（）;
$ client-> onConnect（' connect'）;
$ client-> onDisconnect（' disconnect'）;
$ client-> onSubscribe（' subscribe'）;
$ client-> onMessage（' message'）;
$ client-> connect（ localhost，1883,5）;
$ client-> subscribe（' /＃'，1）;
while （true）{
$ client-> loop（）;
$ mid = $ client-> publish（' / hello'， 来自PHP的Hello .date（' Ymd H：i：s'），1,0）;
echo 已发送的消息ID：{$中间} \\\
;
$ client-> loop（）;
sleep（2）;
}
$ client-> disconnect（）;
unset（$ client）;
函数connect（$ r）{
echo 我得到了代码{$ r} \ n;
}
函数subscribe（）{
echo 订阅主题\ n;
}
函数消息（$ message）{
printf（ 收到消息带有效负载的主题％s上的ID％d：\ n％s \ n \ n，$ message-> mid，$ message-> topic，$ message-> payload）;
}
function disconnect（）{
echo 干净地断开连接;
}
mosquitto_pub -h localhost -t/ mqtt-mHelloWorld
和获得
bash：-h：命令未找到
我不知道问题在哪里，信息写入命令
mosquitto -v
1464002857：mosquitto版本1.4.8（建立日期星期二，2016年5月17日11:26:59 +0100）开始
1464002857：使用默认配置。
1464002857：在端口1883上打开ipv4侦听套接字。
1464002857：错误：地址已在使用
我的窗口中也有同样的问题我安装mosquitto，请看这个链接
使用Windows 7逐步安装和配置Mosquitto分享技术资料 [ ^ ]
我看到Mosquitto Broker（MQTT v3.1经纪人）的服务是runnng并检查示例pub.php进行测试
在主人的mgquitto-PHP / epub.php·mgdm / Mosquitto-PHP·GitHub [ ^ ]
结果是错误Mosquitto \Client（ ）找不到
我搜索并找到了mosquitto.php
mosquitto-stub/mosquitto.php at master·Nakard / mosquitto-stub·GitHub [ ^ ]
并把我把这段代码放在pub.php中>
需要mosquitto.php;
我不知道问题出在哪里，任何人都可以帮忙我在我的窗户和覆盆子里运行mosquitto。
我需要尝试使用php运行runnig mosquitto并且可以与localhost连接并检查连接是否可以订阅并发布和阅读消息
我尝试过：
require mosquitto.php;
client = new Mosquitto \Client （）;
HI
I install PHP client for MQTT using Mosquitto-PHP
Library in raspberry mosquitto php library/[^]
after that create pub.php in /var/www/html/mqtt when write in browser http://210.201.4.120/mqtt/pup.php and no see any data
I then tried
$mosquitto_pub -h localhost -t "/mqtt" -m "HelloWorld"
and the get
bash: -h: command not found
I don't know where the problem is, for information write in command
$mosquitto -v
1464002857: mosquitto version 1.4.8 (build date Tue, 17 May 2016 11:26:59 +0100) starting
1464002857: Using default config.
1464002857: Opening ipv4 listen socket on port 1883.
1464002857:Error: Address already in use
I also have the same problem in my windows I install mosquitto, see this link
Step by step installing and configuring Mosquitto with Windows 7 | Sharing of tech stuff[^]
I see the service for Mosquitto Broker(MQTT v3.1 broker) is runnng and check the example pub.php to testing
Mosquitto-PHP/pub.php at master · mgdm/Mosquitto-PHP · GitHub[^]
the result is error Mosquitto\Client() is not found
I searched and found mosquitto.php
mosquitto-stub/mosquitto.php at master · Nakard/mosquitto-stub · GitHub[^]
and put the I put this code in pub.php
require "mosquitto.php";
I don't know where the problem is, can any one help me to running mosquitto in my windows and raspberry.
I need to try runnig mosquitto with php and can be connected with localhost and check connection is OK or not also to subscribe and publish and reading the message
What I have tried:
require "mosquitto.php";
$client = new Mosquitto\Client();
$client->onConnect('connect');
$client->onDisconnect('disconnect');
$client->onSubscribe('subscribe');
$client->onMessage('message');
$client->connect("localhost", 1883, 5);
$client->subscribe('/#', 1);
while (true) {
$client->loop();
$mid = $client->publish('/hello', "Hello from PHP at " . date('Y-m-d H:i:s'), 1, 0);
echo "Sent message ID: {$mid}\n";
$client->loop();
sleep(2);
}
$client->disconnect();
unset($client);
function connect($r) {
echo "I got code {$r}\n";
}
function subscribe() {
echo "Subscribed to a topic\n";
}
function message($message) {
printf("Got a message ID %d on topic %s with payload:\n%s\n\n", $message->mid, $message->topic, $message->payload);
}
function disconnect() {
echo "Disconnected cleanly\n";
}mosquitto_pub -h localhost -t "/mqtt" -m "HelloWorld"
and the get
bash: -h: command not found
I don't know where the problem is, for information write in command
mosquitto -v
1464002857: mosquitto version 1.4.8 (build date Tue, 17 May 2016 11:26:59 +0100) starting
1464002857: Using default config.
1464002857: Opening ipv4 listen socket on port 1883.
1464002857:Error: Address already in use
I also have the same problem in my windows I install mosquitto, see this link
Step by step installing and configuring Mosquitto with Windows 7 | Sharing of tech stuff[^]
I see the service for Mosquitto Broker(MQTT v3.1 broker) is runnng and check the example pub.php to testing
Mosquitto-PHP/pub.php at master · mgdm/Mosquitto-PHP · GitHub[^]
the result is error Mosquitto\Client() is not found
I searched and found mosquitto.php
mosquitto-stub/mosquitto.php at master · Nakard/mosquitto-stub · GitHub[^]
and put the I put this code in pub.php
require "mosquitto.php";
I don't know where the problem is, can any one help me to running mosquitto in my windows and raspberry.
I need to try runnig mosquitto with php and can be connected with localhost and check connection is OK or not also to subscribe and publish and reading the message
What I have tried:
require "mosquitto.php";
client = new Mosquitto\Client();
这篇关于覆盆子和窗户中的Mosquitto-PHP库的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
