请使用telnet呼叫从一个Android模拟器到另一个? [英] Make calls using telnet from one Android Emulator to another?

查看:190
本文介绍了请使用telnet呼叫从一个Android模拟器到另一个?的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

时有可能使通过telnet呼叫从一个Android模拟器到另一个?

Is it possible to make calls through telnet from one Android Emulator to another?

例如,我有两个仿真器5554和5556在屏幕上打开。我可以用命令: GSM呼叫5554 通过telnet来获得来电从5554

For example, I have two emulators 5554 and 5556 open on the screen. I can use the command: gsm call 5554 to get an incoming call from 5554 through telnet.

是否可以拨出电话,从5554到5556,反之亦然?

Is it possible to make an outgoing call from 5554 to 5556 or vice-versa?

推荐答案

是的,这是可能的。 使用下面的污水处理厂:

Yes, it is possible. USe the following stps:

  1. 启动两个模拟器(如5556和5558)
  2. 在窗口去启动;键入cmd;和输入telnet localhost 5556,你会得到 连接到在端口5556
  3. 模拟器
  4. 现在,键入的GSM呼叫5556
  5. 单击/绘制绿色手机右侧接收呼叫在模拟器上5556。
  6. 点击与+模拟器上的标志5556屏幕的添加通话按钮。

  1. Start both the emulators (e.g., 5556 and 5558)
  2. On windows go to start; type cmd; and type telnet localhost 5556 and you will get connected to the emulator which is on port 5556
  3. Now type gsm call 5556
  4. Receive the call on the emulator 5556 by clicking/drawing the green phone to the right side.
  5. Click the add call button with + sign on the emulator 5556 screen.

在拨号盘上拨打的号码5558,点击绿色的电话图标。你会听,这是响当当其他仿真器5558。

On the dial pad dial the number 5558 and click the green phone icon. You will listen that it is ringing to the other emulator 5558.

在模拟器5558中,您将有一段时间来电通知后见。收到通过单击它,然后点击电话图标,绿色电话图标的电话。请注意,5556是保留这是从远程登录的电话。

On the emulator 5558, you will see after some time incoming call notification. Receive the call by clicking it and clicking the phone icon and the green phone icon. Notice that 5556 is on hold which is the call from the telnet.

preSS在5556模拟器的屏幕交换按钮,现在5558仿真器是在其上使用数字5556为上线保持和Telnet方式调用。

Press the swap button on 5556 emulator screen and now 5558 emulator is on hold and telent call which is using the number 5556 is on line.

现在,当5558被搁置。点击5556模拟器的屏幕,这将取消telnet和5556仿真器,但两个模拟器remian之间的呼叫之间的呼叫上的红色电话图标。

Now when 5558 is on hold. Click the red phone icon on the 5556 emulator screen which will cancel the call between the telnet and 5556 emulator but the call between the two emulators remian.

取消呼叫5558模拟器现在。通话结束。

Cancel the call on 5558 emulator now. The call ends.

现在通过点击在屏幕的顶部示出的呼叫记录的数量从5558拨仿真器5556或做从其他仿真器5556和它们在彼此线

Now dial the emulator 5556 from 5558 by clicking the number in the call log shown on the top of the screen OR do it from the other emulator 5556 and they are on line with one another.

你可以看到下面的网址的截图:

这篇关于请使用telnet呼叫从一个Android模拟器到另一个?的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆