Azure信息保护扫描程序扫描不一致 [英] Azure Information Protection Scanner scanning inconsistencies
问题描述
我们部署了一台AIP扫描仪来扫描大部分网络共享，以识别敏感信息（如果存在保护信息）。
大约有70股总共大约1 TB的数据需要扫描。 报告设置为调试以获取完整详细信息
由于当前正在升级的网络配置在月底我只添加了大约200 GB /晚并且
在调试模式下进行手动扫描，在网络升级时将启用连续扫描。
在我的第2天首次尝试添加一些总计100 GB /天的存储库，扫描仪遇到了内存问题（它有8 GB和4个处理器）。
我们当天添加了更多ram（总计40 GB）以减轻错误，确实没有更多内存错误。
我然后添加了另外几个存储库，认为扫描程序会重新扫描它有内存问题的目录，但它没有。
我的下一步是进行重置扫描 Start-AIPScan -Reset
我删除了之前的所有报告 thinkin g一个新的开始会重新扫描到目前为止添加的每个存储库（大约300 GB） 但是，我注意到报告通过报告扫描程序以前遇到的问题
扫描了该目录中的文件，但没有扫描任何子目录他们是否会在报告中显示他们被跳过了
We deployed an AIP scanner to scan a bulk of our network shares to identify sensitive information if it exists for protection.
There is approximately 70 shares with a total of about 1 TB of data to be scanned. Reports are set to debug for full details
Because of the current network configuration that is being upgraded at the end of the month I am only adding about 200 GB / night and
conducting manual scans in debug mode, continuous scans will be enabled when the network is upgraded.
In my first attempt after day 2 of adding a few repositories totaling 100 GB / day at most the scanner ran into memory issues (it had 8 GB and 4 processors).
We added more ram that day (for a new total of 40 GB) to alleviate the errors, it did, no more memory errors.
I then added another few repositories thinking the scanner would re-scan the directories it had memory issues with, it did not.
My next step was to do a reset scan Start-AIPScan -Reset
and I removed all previous reports thinking a fresh start would re-scan every repository added up to this point (roughly 300 GB) However, I noticed going through the report the directory the scanner had previous issues with
scanned the files in that directory but not any of the sub directories nor do they show up on the report they were skipped
我添加了几个存储库并执行了另一次手动扫描 - 以前扫描仪存在内存问题的目录未被扫描
I added a couple more repositories and performed another manual scan - those previous directories that the scanner had memory issues with are not being scanned
这不是角色限制 143 2016年总限制为260，也没有权限问题
This is not a character limitation 143 total limit is 260 on windows 2016, nor a permissions issue
另一个观察结果是，摘要txt文件显示扫描文件总数增加，但是，详细报告的csv包含的内容较少文件比前一晚的情况多，是以前扫描的混合物加上新的。
Another observation is the summary txt file shows the total # of scanned files increasing, however, the csv with the detailed report contains less files than the previous night's and is a mixture of previously scanned plus new.
我需要依赖这些扫描的结果，目前的不一致是有关的。 有什么想法？
I need to depend on the results of these scans, the current inconsistencies are concerning. Any thoughts?
推荐答案
我建议你打开
Azure支持服务单，以便身份支持工程师可以进一步检查此问题。如果您在支持计划中限制打开支持服务单，请告知我们。
I suggest you to please open a Azure Support Ticket so that Identity Support engineer can check further on this issue. In case you limitations in your support plan to open support ticket please let me know.
这篇关于Azure信息保护扫描程序扫描不一致的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
