连接到HyperV的问题 [英] Problems Connected To HyperV
问题描述
Hello Team！
Hello Team!
我在运行ASRDeploymentPlanner.exe时遇到问题。
I have a problem getting the ASRDeploymentPlanner.exe to run without problems.
我已将VM和HyperVisor放入受信任的计算机中。 如果我使用具有正确密码的域管理员用户，我会得到这个
I have put both VM and HyperVisor in the trusted computers. If i use a domain admin user with correct password I get this
C：\ ASRDeploymentPlanner-v2.3> ASRDeploymentPlanner.exe -Operation GetVMlist -Serv
erListFile" E：\ProfiledData \ ServerList.txt" -User mastercomputing -OutputFile" E
：\ProfiledData \VMListFile.txt"
由于未提及有效的虚拟化平台。使用"Hyper-V"作为vir
tualization平台。
目录未指定。使用默认目录C：\ASRDeploymentPlanner-
v2.3 \ProfiledData来获取或存储数据
输入Hyper-V Server密码：
********
HYPER-V到AZURE ASR部署计划员
列表中的Hyper-V服务器数量：2
该工具将连接到每台服务器，并获取所有虚拟机。
它。
如果服务器属于Hyper-V群集，它将从群集的所有节点获得虚拟机。$
连接到hyper-v10 ...
$
已连接
HYPER-V10是一个独立主机
获取虚拟机列表。 ..
为HYPER-V10找到的虚拟机数量：16
连接到192.168.1.60 ...
无法连接到192.168.1.60于3/11/2019 5:07:20 PM由于其中一个
欠款原因b
1.用户不正确姓名或密码
2.服务器可能是关闭。
2. Localhost可能无法远程访问Hyper-V服务器 - >检查先决条件是否已完成
uisites
3.运行命令的控制台没有足够的权限
- >以管理员身份打开命令行控制台，然后再次运行命令
。
$
摘要
- -----
$
从以下Hyper-V服务器成功检索虚拟机列表
rs
hyper-v10
找到的虚拟机总数：16
无法从中检索虚拟机列表以下Hyper-V服务器
192.168.1.60
在E：\ProfiledData \ VMListFile_2019-03-成功生成的VM列表文件11_17-
07-20.txt
在ASR部署计划程序的StartProfiling操作中使用此文件来分析虚拟机的数据。您可以从您不想分析的
文件中删除虚拟机名称。
C：\ ASRDeploymentPlanner- v2.3>
C:\ASRDeploymentPlanner-v2.3>ASRDeploymentPlanner.exe -Operation GetVMlist -Serv
erListFile "E:\ProfiledData\ServerList.txt" -User mastercomputing -OutputFile "E
:\ProfiledData\VMListFile.txt"
Since no valid virtualization platform was mentioned. Using "Hyper-V" as the vir
tualization platform.
Directory is not specified. Using the default directory C:\ASRDeploymentPlanner-
v2.3\ProfiledData to fetch or store data
Enter Hyper-V Server password :
********
HYPER-V TO AZURE ASR DEPLOYMENT PLANNER
Number of Hyper-V servers in the list : 2
The tool will connect to each server and get all the virtual machines present on
it.
If a server belongs to a Hyper-V cluster, it will get the virtual machines from
all the nodes of the cluster.
Connecting to hyper-v10...
Connected
HYPER-V10 is a standalone host
Fetching the list of virtual machines...
Number of virtual machines found for HYPER-V10 : 16
Connecting to 192.168.1.60...
Could not connect to 192.168.1.60 at 3/11/2019 5:07:20 PM due to one of the foll
owing reasons
1. Incorrect User Name or Password
2. Server may be powered off.
2. Localhost may not have remote access to the Hyper-V Server -> Check if prereq
uisites have been completed
3. The console from where the command is run does not have sufficient privilege
-> Open the command-line console as Administrator and then run the command again
.
Summary
-------
Successfully retrieved list of virtual machines from the following Hyper-V serve
rs
hyper-v10
Total virtual machines found: 16
Failed to retrieved list of virtual machines from the following Hyper-V servers
192.168.1.60
VM List file successfully generated at E:\ProfiledData\VMListFile_2019-03-11_17-
07-20.txt
Use this file in StartProfiling operation of ASR Deployment Planner to profile t
he virtual machines. You can remove the virtual machine names from the file that
you don't want to profile
C:\ASRDeploymentPlanner-v2.3>
好的！ 因此，如果我使用本地管理员帐户，我会得到：
OK! So if i user a local administrator account i get this:
C：\ ASRDeploymentPlanner-v2.3> ASRDeploymentPlanner.exe -Operation GetVMlist -Serv
erListFile" E：\ProfiledData \ ServerList.txt" -User Administrator -OutputFile" E：\
ProfiledData \VMListFile.txt"
由于未提及有效的虚拟化平台。使用"Hyper-V"作为vir
tualization平台。
目录未指定。使用默认目录C：\ASRDeploymentPlanner-
v2.3 \ProfiledData来获取或存储数据
输入Hyper-V Server密码：
*********
$
HYPER-V到AZURE ASR部署计划员
列表中的Hyper-V服务器数量：2
该工具将连接到每台服务器，并获得所有虚拟机。
。
如果服务器属于Hyper-V群集，它将从群集的所有节点获得虚拟机。
连接到hyper-v10 ...
$
无法连接到HYPER-V10于3/11/2019 5:09:17 PM由于以下其中一个b $ b $原因
1.用户名或密码不正确
2.服务器可能已断电。
2.本地主机可能没有远程访问Hyper-V服务器 - >检查先决条件是否已完成
uisites
3.运行命令的控制台没有足够的权限
- >以管理员身份打开命令行控制台，然后再次运行命令
。
$
连接到192.168.1.60 ...
无法在3/11/2019 5:09:17 PM连接到192.168.1.60，因为其中一个
欠款原因为
1。用户名或密码不正确
2.服务器可能已关闭电源。
2. Localhost可能无法远程访问Hyper-V服务器 - >检查先决条件是否已完成
uisites
3.运行命令的控制台没有足够的权限
- >以管理员身份打开命令行控制台，然后再次运行命令
。
$
摘要
- -----
无法从以下Hyper-V服务器检索虚拟机列表
hyper-v10
192.168.1.60
未找到虚拟机
C：\ ASRDeploymentPlanner-v2。 3>
C:\ASRDeploymentPlanner-v2.3>ASRDeploymentPlanner.exe -Operation GetVMlist -Serv
erListFile "E:\ProfiledData\ServerList.txt" -User Administrator -OutputFile "E:\
ProfiledData\VMListFile.txt"
Since no valid virtualization platform was mentioned. Using "Hyper-V" as the vir
tualization platform.
Directory is not specified. Using the default directory C:\ASRDeploymentPlanner-
v2.3\ProfiledData to fetch or store data
Enter Hyper-V Server password :
*********
HYPER-V TO AZURE ASR DEPLOYMENT PLANNER
Number of Hyper-V servers in the list : 2
The tool will connect to each server and get all the virtual machines present on
it.
If a server belongs to a Hyper-V cluster, it will get the virtual machines from
all the nodes of the cluster.
Connecting to hyper-v10...
Could not connect to HYPER-V10 at 3/11/2019 5:09:17 PM due to one of the followi
ng reasons
1. Incorrect User Name or Password
2. Server may be powered off.
2. Localhost may not have remote access to the Hyper-V Server -> Check if prereq
uisites have been completed
3. The console from where the command is run does not have sufficient privilege
-> Open the command-line console as Administrator and then run the command again
.
Connecting to 192.168.1.60...
Could not connect to 192.168.1.60 at 3/11/2019 5:09:17 PM due to one of the foll
owing reasons
1. Incorrect User Name or Password
2. Server may be powered off.
2. Localhost may not have remote access to the Hyper-V Server -> Check if prereq
uisites have been completed
3. The console from where the command is run does not have sufficient privilege
-> Open the command-line console as Administrator and then run the command again
.
Summary
-------
Failed to retrieved list of virtual machines from the following Hyper-V servers
hyper-v10
192.168.1.60
No VMs found
C:\ASRDeploymentPlanner-v2.3>
此外，serverlist.txt中也包含此内容：
Also the serverlist.txt has this in it:
HYPER-V10
192.168.1.60
HYPER-V10
192.168.1.60
我检查了密码/用户名，检查了密码/用户名，服务器已打开，localhost看起来正确。它是以管理员的身份运行CMD。
I have double and triple checked the passwords/usernames, The server is on, The localhost looks right to me. and it is defiantly run CMD as admin.
任何建议？
推荐答案
嗨约翰，你能否证实你也检查了这个：
Hi John, can you also confirm you have also checked this:
- > Localhost可能无法远程访问Hyper-V服务器
参考： https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/manage/remotely-manage-hyper-v-hosts#manage-hyper -v-hosts-remote
For your reference: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/manage/remotely-manage-hyper-v-hosts#manage-hyper-v-hosts-remotely
这篇关于连接到HyperV的问题的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
