通话过程中禁止接近传感器 [英] Disable Proximity Sensor during call

问题描述

我放弃了我的手机，看起来像我接近传感器不再可靠地工作。它返回的近的所有的时间。问题是，在通话过程中显示关闭，我将无法使用数字键盘输入PIN或会议另一个呼叫，甚至挂断电话。我发现，在辅助功能设置电源键断开选项并使用了。

I dropped my phone and looks like my proximity sensor no longer works reliably. It returns Near all the time. The problem is, the display turns off during call and I wont be able to use the number pad to enter pin or conference another call, or even disconnect the call. I found the Power button disconnect option in Accessibility settings and uses that now.

我试图创建一个应用程序，试图获得一个时接到电话希望它会继续在显示屏上全wakelock。

I tried to create an app that tries to obtain a full wakelock when a call is received hoping that it will keep the display on.

• 创建一个广播接收器调用服务的时候，手机状态改变为OFFHOOK

• Created a broadcast receiver that invokes a service when the phone state changes to OFFHOOK

该服务获得一个完整的wakelock并释放它，只有当手机状态是空闲的。

The service acquires a full wakelock and releases it only when phone state is IDLE.

但尽管如此，接近传感器关闭显示。我用了isHeld（）方法来确保已获得了锁。我用电源管理器的isScreenOn（）方法，它返回真实的，即使当屏幕在通话过程中是关闭的。我试图获得wakelocks每两个第二测试循环中，仍然显示不上去。

But still, proximity sensor turns the display off. I used the isHeld() method to make sure that the lock is acquired. I used PowerManager's isScreenOn() method and it returned true even when the screen was off during the call. I tried to obtain the wakelocks every two second in a loop for testing, still the display won't come up.

我使用的是一台Nexus 5的Andr​​oid版本4.4.4

I'm using a Nexus 5 Android version 4.4.4

任何人都可以提出一个想法，以覆盖接近传感器的行为？根要求的选项也很好。

Can anyone suggest an idea to override the proximity sensor behaviour? A root-required option is also fine.

谢谢！

推荐答案

我发现我的解决方案的这里。 基本上使用的应用程序称为接近屏幕关闭精简版 并设置如下：

I found my solution here. Basically use an app called Proximity Screen Off Lite and set it as below:

1. 屏幕开/关模式 检查封面并保持打开屏幕 超时：1秒 选中禁用Accidentla锁 超时：4秒

1. Screen On/Off Modes Check "Cover and hold to turn on Screen" Timeout: 1 second Check "Disable Accidentla Lock" Timeout: 4 seconds

所有的设置 选中禁用Lanscape 选中锁定的手机屏幕上的

All settings Check "Disable in Lanscape" Check "Lock phone on screen ON"

[高级]配置Sensore 选择传感器：接近传感器 当传感器覆盖值：0 当传感器未覆盖的价值：1

[Advanced] Configure Sensore Select sensor: Proximity sensor Value when sensor covered: 0 Value when sensor un-covered: 1

这篇关于通话过程中禁止接近传感器的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！